Применение метода подвижных клеточных автоматов для оптимизации внутренней структуры эндопротеза тазобедренного сустава человека

На основе метода подвижных клеточных автоматов проведено изучение влияния конструкционных изменений эндопротеза тазобедренного сустава человека на деформационные и прочностные свойства, а также динамику генерации и развития повреждений в системе "сустав-эндопротез-бедренная кость". Структура протеза модифицировалась введением в шейку демпфирующих включений и нанесением покрытия на ножку имплантата. Показано, что наличие таких включений практически не изменяет прочность системы, но при этом ведет к заметному увеличению предельной деформации структуры "кость - протез", а также оказывает влияние на динамику зарождения и развития повреждений в костной ткани

Investigating the potential to retrieve cloud droplet number concentration from ship-based measurements of spectral solar radiance during EUREC4A

Ship-based cloud remote sensing observations made onboard R/V Meteor during the ElUcidating the RolE of Cloud-Circulation Coupling in ClimAte, EUREC4A, campaign are presented and used to calculate cloud droplet number concentrations. The calculation is based on cloud liquid water path LWP and droplet effective radius reff retrieved from spectral measurements of transmitted solar radiance. It is shown that measurement uncertainties and retrieval assumptions impact the accuracy of the results. A case study indicates that the retrieval of LWP and reff is most affected by 3D-radiative effects in case of shallow cumulus and drizzle, which violates the adiabatic theory and plan-parallel geometry on which the radiative transfer simulations of the retrieval are based. Depending on the cloud thickness, the retrieval of reff might suffers from ambiguity. These retrieval uncertainties and their implications on the estimated cloud droplet number concentration are investigated by a sensitivity study. The analysis showed that most of the uncertainty is introduced by reff, whereas LWP contributes significantly to the uncertainty only for thin clouds. Therefore, it is concluded that only selected cloud cases, which do not violate the retrieval assumption, such as stratiform cloud layers, are suited to apply the retrieval approach in further studies.Fernerkundungsmessungen von Wolken auf dem Forschungsschiff R/V Meteor während der ElUcidating the RolE of Cloud-Circulation Coupling in ClimAte, EUREC4A, Kampagnewerden vorgestellt und zur Berechnung der Tröpfchenanzahlkonzentration verwendet. Die Berechnung basiert auf Messungen des Flüssigwasserpfads LWP und dem effektiven Tröpfchenradius reff, welche aus spektralen Messungen der transmittierten solaren Strahldichte abgeleitet wurden. Es wird gezeigt, dass Messunsicherheiten und Annahmen bei der Ableitung der Wolkeneigenschaften die Genauigkeit der Ergebnisse beeinflussen. Eine Fallstudie zeigt, dass die Ableitung von LWP und reff am stärksten durch 3-dimensionale Strahlungseffekte von flachen Cumuli und Nieselregen beeinflusst wird. Beides wiederspricht den Idealisierungen von adiabatischen Wolken und einer planparallelen Geometrie, auf denen die Strahlungstransfersimulationen des Verfahrens beruhen. Abhängig von der Wolkendicke kann die Ableitung von reff zusätzlich durch Mehrdeutigkeiten beeinflusst sein

Investigation of the olive mill solid wastes pellets combustion in a counter-current fixed bed reactor

Combustion tests and gaseous emissions of olive mill solid wastes pellets (olive pomace (OP), and olive pits (OPi)) were carried out in an updraft counter-current fixed bed reactor. Along the combustion chamber axis and under a constant primary air flow rate, the bed temperatures and the mass loss rate were measured as functions of time. Moreover, the gas mixture components such as O2, organic carbon (Corg), CO, CO2, H2O, H2, SO2, and NOx (NO + NO2) were analyzed and measured. The reaction front positions were determined as well as the ignition rate and the reaction front velocity. We have found that the exhaust gases are emitted in acceptable concentrations compared to the combustion of standard wood pellets reported in the literature (EN 303-5). It is shown that the bed temperature increased from the ambient value to a maximum value ranging from 750 to 1000 °C as previously reported in the literature. The results demonstrate the promise of using olive mill solid waste pellets as an alternative biofuel for heat and/or electricity production

Anomalous diffusion and Tsallis statistics in an optical lattice

We point out a connection between anomalous quantum transport in an optical lattice and Tsallis' generalized thermostatistics. Specifically, we show that the momentum equation for the semiclassical Wigner function that describes atomic motion in the optical potential, belongs to a class of transport equations recently studied by Borland [PLA 245, 67 (1998)]. The important property of these ordinary linear Fokker--Planck equations is that their stationary solutions are exactly given by Tsallis distributions. Dissipative optical lattices are therefore new systems in which Tsallis statistics can be experimentally studied.Comment: 4 pages, 1 figur

Techno‐economic assessment and comparison of different plastic recycling pathways: A German case study

Greenhouse gas (GHG) emissions need to be reduced to limit global warming. Plastic production requires carbon raw materials and energy that are associated today with predominantly fossil raw materials and fossil GHG emissions. Worldwide, the plastic demand is increasing annually by 4%. Recycling technologies can help save or reduce GHG emissions, but they require comparative assessment. Thus, we assess mechanical recycling, chemical recycling by means of pyrolysis and a consecutive, complementary combination of both concerning Global Warming Potential (GWP) [CO2e], Cumulative Energy Demand (CED) [MJ/kg], carbon efficiency [%], and product costs [€] in a process‐oriented approach and within defined system boundaries. The developed techno‐economic and environmental assessment approach is demonstrated in a case study on recycling of separately collected mixed lightweight packaging (LWP) waste in Germany. In the recycling paths, the bulk materials polypropylene (PP), polyethylene (PE), polyvinylchloride (PVC), and polystyrene (PS) are assessed. The combined mechanical and chemical recycling (pyrolysis) of LWP waste shows considerable saving potentials in GWP (0.48 kg CO2e/kg input), CED (13.32 MJ/kg input), and cost (0.14 €/kg input) and a 16% higher carbon efficiency compared to the baseline scenario with state‐of‐the‐art mechanical recycling in Germany. This leads to a combined recycling potential between 2.5 and 2.8 million metric tons/year that could keep between 0.8 and 2 million metric tons/year additionally in the (circular) economy instead of incinerating them. This would be sufficient to reach both EU and German recycling rate targets (EC 2018). This article met the requirements for a gold‐silver JIE data openness badge described at http://jie.click/badges

Supercooled confined water and the Mode Coupling crossover temperature

We present a Molecular Dynamics study of the single particle dynamics of supercooled water confined in a silica pore. Two dynamical regimes are found: close to the hydrophilic substrate molecules are below the Mode Coupling crossover temperature, $T_C$, already at ambient temperature. The water closer to the center of the pore (free water) approaches upon supercooling $T_C$ as predicted by Mode Coupling Theories. For free water the crossover temperature and crossover exponent $\gamma$ are extracted from power-law fits to both the diffusion coefficient and the relaxation time of the late $\alpha$ region.Comment: To be published, Phys. Rev. Lett., 4 pages, 3 figures, revTeX, minor changes in the figures, references added, changes in the tex