283 research outputs found
Runoff-generated debris flows: Observation of initiation conditions and erosion–deposition dynamics along the channel at Cancia (eastern Italian Alps)
In the Dolomitic region, abundant coarse hillslope sediment is commonly found at the toe of rocky cliffs. Ephemeral channels originate where lower permeability bedrock surfaces concentrate surface runoff. Debris flows initiate along such channels following intense rainfall and determine the progressive erosion and deepening of the channels. Sediment recharge mechanisms include rock fall, dry ravel processes and channel-bank failures. Here we document debris flow activity that took place in an active debris flow basin during the year 2015. The Cancia basin is located on the southwestern slope of Mount Antelao (3264 m a.s.l.) in the dolomitic region of the eastern Italian Alps. The 2.5 km2 basin is incised in dolomitic limestone rocks. The data consist of repeated topographic surveys, distributed rainfall measurements, time-lapse (2 s) videos of two events and pore pressure measurements in the channel bed. During July and August 2015, two debris flow events occurred, following similarly intense rainstorms. We compared rainfall data to existing rainfall triggering thresholds and simulated the hydrological response of the headwater catchment with a distributed model in order to estimate the total and peak water discharge. Our data clearly illustrate how debris entrainment along the channel is the main contributor to the overall mobilized volume and that erosion is dominant when the channel slope exceeds 16°. Further downstream, sediment accumulation and depletion occurred alternately for the two successive events, indicating that sediment availability along the channel also influences the flow behaviour along the prevailing-transport reach. The comparison between monitoring data, topographical analysis and hydrological simulation allows the estimation of the average solid concentration of the two events and suggests that debris availability has a significant influence on the debris flow volume. © 2020 John Wiley & Sons, Ltd
Tackling TB in migrants arriving at Europe’s southern border
Over a quarter of the individuals diagnosed with tuberculosis [TB] in the European Union region are born outside of the area and the proportion has been increasing steadily. Italy is a low TB incidence country with over 50% of TB cases in the foreign-born population primarily due to the high numbers of migrants entering the country via land or sea. As a case study to evaluate the value of screening in newly arrived migrants, the EDETECT-TB project in Italy implemented and evaluated active TB screening in the migrant population at first reception centres to ensure early diagnosis to avoid further spread. Based on a cost-effectiveness analysis from a program provider perspective, a decision tree model allowed the assessment of the value for money of case finding by estimating the cost per case of active TB detected compared with the status quo of no screening. The analysis confirmed that early case detection is a cost-effective intervention in areas with migrants arriving from high TB risk settings. Targeted post-arrival early screening of high TB risk vulnerable new entrants to Italy has a potential role in reducing the spread of TB among migrants
Hierarchical TiN-Supported TsFDH Nanobiocatalyst for CO2 Reduction to Formate
The electrochemical reduction of CO2 to value-added products like formate represents a promising technology for the valorization of carbon dioxide. We propose a proof-of-concept bioelectrochemical system (BES) for the reduction of CO2 to formate. For the first time, our device employs a nanostructured titanium nitride (TiN) support for the immobilization of a formate dehydrogenase (FDH) enzyme. The hierarchical TiN nanostructured support exhibits high surface area and wide pore size distribution, achieving high catalytic loading, and is characterized by higher conductivity than other oxide-based supports employed for FDHs immobilization. We select the oxygen-tolerant FDH from Thiobacillus sp. KNK65MA (TsFDH) as enzymatic catalyst, which selectively reduces CO2 to formate. We identify an optimal TiN morphology for the enzyme immobilisation through enzymatic assay, reaching a catalyst loading of 59 μg cm−2 of specifically-adsorbed TsFDH and achieving a complete saturation of the anchoring sites available on the surface. We evaluate the electrochemical CO2 reduction performance of the TiN/TsFDH system, achieving a remarkable HCOO− Faradaic efficiency up to 76 %, a maximum formate yield of 44.1 μmol mg−1FDH h−1 and high stability. Our results show the technological feasibility of BES devices employing novel, nanostructured TiN-based supports, representing an important step in the optimization of these devices
Hierarchical TiN-Supported TsFDH Nanobiocatalyst for CO2 Reduction to Formate
The electrochemical reduction of CO2 to value-added products like formate represents a promising technology for the valorization of carbon dioxide. We propose a proof-of-concept bioelectrochemical system (BES) for the reduction of CO2 to formate. For the first time, our device employs a nanostructured titanium nitride (TiN) support for the immobilization of a formate dehydrogenase (FDH) enzyme. The hierarchical TiN nanostructured support exhibits high surface area and wide pore size distribution, achieving high catalytic loading, and is characterized by higher conductivity than other oxide-based supports employed for FDHs immobilization. We select the oxygen-tolerant FDH from Thiobacillus sp. KNK65MA (TsFDH) as enzymatic catalyst, which selectively reduces CO2 to formate. We identify an optimal TiN morphology for the enzyme immobilisation through enzymatic assay, reaching a catalyst loading of 59 mu g cm(-2) of specifically-adsorbed TsFDH and achieving a complete saturation of the anchoring sites available on the surface. We evaluate the electrochemical CO2 reduction performance of the TiN/TsFDH system, achieving a remarkable HCOO- Faradaic efficiency up to 76 %, a maximum formate yield of 44.1 mu mol mg(FDH)(-1) h(-1) and high stability. Our results show the technological feasibility of BES devices employing novel, nanostructured TiN-based supports, representing an important step in the optimization of these devices
Wave overtopping at near-vertical seawalls: Influence of foreshore evolution during storms
This work presents the results of an investigation on how wave overtopping at a near-vertical seawall at the back of a sandy foreshore is influenced by sequences of erosive storms. The experiments were carried out in the Large Wave Flume (GWK) at Leibniz University, Hannover (Germany). The tested layout consisted of a near-vertical 10/1 seawall and a sandy foreshore with an initial 1/15 slope. Three sequences of idealised erosive storms were simulated. Within each storm both the incident wave conditions and still water level were varied in time to represent high and low tide conditions. Each sequence started from a 1/15 configuration and the beach was not restored in between storms. The measurements included waves, beach profile, wave overtopping volumes. The profile of the beach was measured after each sea state tested. Wave overtopping at each stage of the tested storms was significantly influenced by bed changes. This was linked to the measured evolution of the beach. Measurements showed that a barred profile developed quickly at the start of each sequence, and scour developed at the toe of the structure during high water level conditions, while accretion or partial backfilling developed during low water level conditions. Due to these processes, the position of a sea state in the tested sequence is shown to be an important factor in determining the wave overtopping volume. Remarkably, when a weaker idealised storm followed a more energetic one, nearly the same level of overtopping was recorded. This is explained by the foreshore erosion, leading to increased water depths and wave heights at the toe of the structure. This finding allows to quantify and to explain the variability of wave overtopping in storms following one another at intervals shorter than the recovery time of the foreshore
Monitoring effectiveness and safety of Tafamidis in transthyretin amyloidosis in Italy: a longitudinal multicenter study in a non-endemic area
open24noTafamidis is a transthyretin (TTR) stabilizer able to prevent TTR tetramer dissociation. There have been a few encouraging studies on Tafamidis efficacy in early-onset inherited transthyretin amyloidosis (ATTR) due to Val30Met mutation. However, less is known about its efficacy in later disease stages and in non-Val30Met mutations. We performed a multi-center observational study on symptomatic ATTR patients prescribed to receive Tafamidis. We followed up patients according to a standardized protocol including general medical, cardiological and neurological assessments at baseline and every 6 months up to 3 years. Sixty-one (42 males) patients were recruited. Only 28 % of enrolled subjects had the common Val30Met mutation, mean age of onset was remarkably late (59 years) and 18 % was in advanced disease stage at study entry. Tafamidis proved safe and well-tolerated. One-third of patients did not show significant progression along 36 months, independently from mutation type and disease stage. Neurological function worsened particularly in the first 6 months but progression slowed significantly thereafter. Autonomic function remained stable in 33 %, worsened in 56 % and improved in 10 %. Fifteen percent of patients showed cardiac disease progression and 30 % new onset of cardiomyopathy. Overall, Tafamidis was not able to prevent functional progression of the disease in 23 (43 %) subjects, including 16 patients who worsened in their walking ability and 12 patients who reached a higher NYHA score during the follow-up period. A higher mBMI at baseline was associated with better preservation of neurological function. In conclusion, neuropathy and cardiomyopathy progressed in a significant proportion of patients despite treatment. However, worsening of neurological function slowed after the first 6 months and also subjects with more advanced neuropathy, as well as patients with non-Val30Met mutation, benefited from treatment. Body weight preservation is an important favorable prognostic factor.openCortese, A.; Vita, G.; Luigetti, M.; Russo, M.; Bisogni, G.; Sabatelli, M.; Manganelli, F.; Santoro, L.; Cavallaro, T.; Fabrizi, G.M.; Schenone, A.; Grandis, M.; Gemelli, C.; Mauro, A.; Pradotto, L.G.; Gentile, L.; Stancanelli, C.; Lozza, A.; Perlini, S.; Piscosquito, G.; Calabrese, D.; Mazzeo, A.; Obici, L.; Pareyson, DCortese, Andrea; Vita, G.; Luigetti, M.; Russo, M.; Bisogni, G.; Sabatelli, M.; Manganelli, F.; Santoro, L.; Cavallaro, T.; Fabrizi, G. M.; Schenone, A.; Grandis, M.; Gemelli, C.; Mauro, A.; Pradotto, L. G.; Gentile, L.; Stancanelli, C.; Lozza, A.; Perlini, Stefano; Piscosquito, G.; Calabrese, D.; Mazzeo, A.; Obici, L.; Pareyson, D
- …