591 research outputs found
The Pulsed Neutron Beam EDM Experiment
We report on the Beam EDM experiment, which aims to employ a pulsed cold
neutron beam to search for an electric dipole moment instead of the established
use of storable ultracold neutrons. We present a brief overview of the basic
measurement concept and the current status of our proof-of-principle Ramsey
apparatus
A Comparison of Theory and Experiment for High-speed Free-molecule Flow
A comparison is made of free-molecule-flow theory with the results of wind-tunnel tests performed to determine the drag and temperature-rise characteristics of a transverse circular cylinder. The measured values of the cylinder center-point temperature confirmed the salient point of the heat-transfer analysis which was the prediction that an insulated cylinder would attain a temperature higher than the stagnation temperature of the stream. Good agreement was obtained between the theoretical and the experimental values for the drag coefficient
Heat Transfer to Bodies in a High-speed Rarified-Gas Stream
Report presents the results of an investigation to determine the equilibrium temperature and heat-transfer coefficients for transverse cylinders in a high-speed stream of rarefied gas measured over a range of Knudsen numbers (ratio of molecular-mean-free path to cylinder diameter) from 0.025 to 11.8 and for Mach numbers from 2.0 to 3.3. The range of free-stream Reynolds numbers was from 0.28 to 203. The models tested were 0.0010-, 0.0050-, 0.030-, 0.051-, 0.080-, and 0.126-inch -diameter cylinders held normal to the stream
Added diagnostic value of 16S rRNA gene pan-mycobacterial PCR for nontuberculous mycobacterial infections: a 10-year retrospective study.
The diagnosis of mycobacterial infections has been dramatically improved by the introduction of molecular methods aimed to reduce the time to diagnosis as compared with culture. The broad range pan-mycobacterial PCR can detect all the mycobacterial species directly from clinical specimens. We aimed to evaluate its usefulness and its clinical added value for the diagnosis of nontuberculous mycobacterial (NTM) infections. We performed a retrospective study (2003-2013) including 952 samples taken from 639 patients with clinical suspicion of NTM infection. The performance of smear microscopy, PCR and culture was established using clinical data to investigate discrepant results. We also compared the time to microbial diagnosis between the direct PCR and culture. The sensitivity, specificity, positive and negative predictive values of the PCR were 61.6% (53.5-69.1), 99.1% (98.2-99.6), 92.8% (85.8-96.5) and 93.4% (91.6-94.9), respectively, when considering all specimens. When considering smear-positive specimens and smear-negative specimens, the sensitivity was 81.6% and 40%, respectively. The sensitivity for pulmonary and extra-pulmonary smear-positive specimens was 85.2% versus 72.7%. The median time to identification at species level was 35 days (SD, 17.67) for culture and 6 days (SD, 2.67) for the PCR (when positive), which represents a 29-day shorter time to results (p < 0.0001). The 16S rRNA gene pan-mycobacterial PCR displays a substantial benefit in terms of time to diagnose NTM infections when compared with culture. Despite an excellent specificity, its sensitivity is yet limited in particular for smear-negative specimens, which might be improved by relying onto real-time PCRs
Collision photography: polarization imaging of atom-molecule collisions
We report differential scattering experiments on the laser excitation of Na+Mcollision pairs with M=N₂, CO, C₂H₂, and CO₂. The collision event is probed by the laser polarization revealing geometric and electronic properties of the collision pair. The experimental data are compared to the results of a Monte Carlo trajectory simulation using ab initio quantum chemical data.Financial support from the Deutsche Forschungsgemeinschaft
and the Schweizerischer Nationalfond (Project No. 20-
065290.01) is gratefully acknowledged
Localization Recall Precision (LRP): A New Performance Metric for Object Detection
Average precision (AP), the area under the recall-precision (RP) curve, is
the standard performance measure for object detection. Despite its wide
acceptance, it has a number of shortcomings, the most important of which are
(i) the inability to distinguish very different RP curves, and (ii) the lack of
directly measuring bounding box localization accuracy. In this paper, we
propose 'Localization Recall Precision (LRP) Error', a new metric which we
specifically designed for object detection. LRP Error is composed of three
components related to localization, false negative (FN) rate and false positive
(FP) rate. Based on LRP, we introduce the 'Optimal LRP', the minimum achievable
LRP error representing the best achievable configuration of the detector in
terms of recall-precision and the tightness of the boxes. In contrast to AP,
which considers precisions over the entire recall domain, Optimal LRP
determines the 'best' confidence score threshold for a class, which balances
the trade-off between localization and recall-precision. In our experiments, we
show that, for state-of-the-art object (SOTA) detectors, Optimal LRP provides
richer and more discriminative information than AP. We also demonstrate that
the best confidence score thresholds vary significantly among classes and
detectors. Moreover, we present LRP results of a simple online video object
detector which uses a SOTA still image object detector and show that the
class-specific optimized thresholds increase the accuracy against the common
approach of using a general threshold for all classes. At
https://github.com/cancam/LRP we provide the source code that can compute LRP
for the PASCAL VOC and MSCOCO datasets. Our source code can easily be adapted
to other datasets as well.Comment: to appear in ECCV 201
Correction to: Added diagnostic value of 16S rRNA gene pan-mycobacterial PCR for nontuberculous mycobacterial infections: a 10-year retrospective study.
- …