Optimization methodology of composite panels

This paper deals with mass optimisation of composite laminates aeronautical structures. It focuses on the final stage of the process of composite structure design i.e. defining the lay-up evolution all over the panel, this being directly used for manufacturing. Strength criteria (in-plane behaviour) and stability criteria (out-of-plane behaviour) performed with appropriate industrial tools are evaluated in the multi-level optimisation presented hereafter. The methodology consists in five steps. In the first two steps, optimisation is performed with continuous variables and a homogenized material (i.e. with approached out of plane properties). In the third step, a lay-up table is selected (or built) and translated into a "continuous" material (i.e. out of plane stiffnesses expressed as continuous variables of the lay-up thickness). In the fourth step, optimisation is performed with the "continuous" material. In the last step, a genetic optimisation is used to round off at discrete ply thicknesses. This methodology provides a manufacturable result (in terms of ply continuity) that satisfies all stress and stacking sequence constraints

IL-6 Deficiency Attenuates Murine Diet-Induced Non-Alcoholic Steatohepatitis

BACKGROUND:The role of inflammation in the pathogenesis of non-alcoholic steatohepatitis (NASH), a common cause of liver disease, is still poorly understood. This study aimed at assessing the involvement of a major inflammatory cytokine, IL-6, in NASH. MATERIALS AND METHODS:Steatohepatitis was induced by feeding wild-type or IL-6(-/-) mice for 5 weeks with a methionine and choline-deficient (MCD) diet. RESULTS:Whereas MCD diet-induced weight loss and decreases in serum glucose, cholesterol and triglyceride levels were similar in both genotypes, serum alanine aminotransferase was less elevated in IL-6(-/-) mice than in wild-type animals. Despite having a comparable liver steatosis score, IL-6-deficient mice exhibited less lobular inflammation than their wild-type littermates. Liver gene expression of TGF-beta and MCP-1 was also strongly attenuated in mutant mice; a more modest reduction was observed for PPAR-gamma and F4/80 transcripts as well as proteins. Chromatographic analysis of liver lipids demonstrated that MCD diet induced in normal and mutant mice a similar decrease in the ratio of phosphatidylcholine to phosphatidylethanolamine. However, the diet-induced increase in the levels of sphingomyelin and ceramide was less important in IL-6(-/-) mice. CONCLUSION:Altogether, these results indicate that IL-6 deficiency does not block the development of NASH; yet, IL-6 plays a critical role in the accompanying liver inflammation

α,ω-Di(glycerol carbonate) telechelic polyesters and polyolefins as precursors to polyhydroxyurethanes: an isocyanate-free approach

International audienceα,ω-Di(glycerol carbonate) telechelic poly(propylene glycol) (PPG), poly(ethylene glycol) (PEG), poly(ester ether) (PEE), and poly(butadiene) (PBD) have been synthesized through chemical modification of the corresponding α,ω-dihydroxy telechelic polymers (PPG-OH2, PEG-OH2, PEE-OH2 and PBD-OH2, respectively). Tosylation of the polymer diols with 4-tosylmethyl-1,3-dioxolan-2-one (GC-OTs) afforded, in high yields, the desired PPG, PEG, PEE and PBD end-capped at both termini with a five-membered ring cyclic glycerol carbonate (4-hydroxymethyl-1,3-dioxolan-2-one, GC). The GC-functionalization of the polymers at both chain-ends has been confirmed by NMR (1H, 13C, 1D and 2D) and FTIR spectroscopies. Using PPG-GC2 to demonstrate the concept, the corresponding polyhydroxyurethanes (PHUs/non-isocyanate polyurethanes (NIPUs)) have been subsequently prepared following a non-isocyanate method upon ring-opening catalyst-free polyaddition of the PPG-GC2 with JEFFAMINEs (Mn = 230-2000 g mol−1). The effect of various additives introduced during the polyaddition reaction has been studied at different temperatures. In particular, addition of LiBr (5 mol%) to the reaction medium was found to slightly promote the cyclocarbonate/amine reaction. The polymerization process was supported by FTIR and SEC analyses

alpha,omega-Bis(trialkoxysilyl) difunctionalized polycyclooctenes from ruthenium-catalyzed chain-transfer ring-opening metathesis polymerization

International audienceThe ring-opening metathesis polymerization/cross-metathesis (ROMP/CM) of cyclooctene (COE) using bis(trialkoxysilyl)alkenes as chain-transfer agents (CTAs) and Ru catalysts to afford difunctionalized polyolefins is reported. The formation of alpha,omega-bis(trialkoxysilyl) telechelic polycycloolefins (DF) with controlled molar mass values takes place quite selectively (>90 wt%), along with minor amounts of cyclic non-functionalized polymers (CNF), as evidenced by NMR, MALDI-ToF MS, SEC analyses and fractionation experiments. The nature of the CTA and catalyst influenced much the efficiency and selectivity of the reaction. (MeO)(3)SiCH2CH=CHCH2Si(OMe)(3) (2) and (MeO)(3)Si(CH2)(3)NHC(O)OCH2CH=CHCH2OC(O)NH (CH2)(3)Si(OMe)(3) (5) proved to be the most efficient CTAs in terms of reactivity, catalyst productivity and selectivity towards DF. Diurethane CTA 5 is easily prepared, and can also be conveniently generated in situ during the ROMP/CM. Grubbs' 2nd-generation catalyst (G2) and Hoveyda-Grubbs's catalyst (HG2) afforded the best compromise in terms of selectivity and productivity, with turnover numbers of up to 95 000 mol(COE) mol(Ru)(-1) and 5000 mol(CTA) mol(Ru)(-1)

Ring-opening metathesis polymerization of cyclooctene derivatives with chain transfer agents derived from glycerol carbonate

International audienceThe synthesis of a variety of mono- and di-(glycerol carbonate) telechelic polyolefins has been achieved upon ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) of cyclooctene (COE) derivatives in the presence of a vinyl or acryloyl derivative of glycerol carbonate (GC) acting as a chain-transfer agent (CTA). Reaction monitoring based on SEC and 1H NMR analyses suggested that the ROMP proceeds through the formation of first the α-GC,ω-vinyl-poly(cyclooctene) (PCOE) intermediate, which eventually evolves over time into the α,ω-di(GC)-PCOE. The nature of the solvent was shown to have a significant impact on both the reaction rates and the eventual selectivity for the mono-/di-telechelic PCOE. ROMP of 3-alkyl (methyl, ethyl, n-hexyl)-substituted COEs (3-R-COEs) afforded only the α-GC,ω-vinyl-poly(3-R-COE)s, as a result of the steric hindrance around the active intermediate, while a 5-ethyl substituted COE (5-Et-COE) enabled access to the corresponding α,ω-di(GC)-poly(5-Et-COE). The ROMP of 5,6-epoxy-, 5-hydroxy- and 5-oxo-functionalized COEs in the presence of acryloyl-GC as the CTA has also been achieved, affording from the first two monomers polymers with GC end-groups at both extremities, while a 60 : 40 mixture of mono- and di-GC terminated P(5-O[double bond, length as m-dash]COE) was observed in the latter case

Impact of basin burial and exhumation on Jurassic carbonates diagenesis on both sides of a thick clay barrier (Paris Basin, NE France).

27 pagesInternational audienceSeveral diagenetic models have been proposed for Middle and Upper Jurassic carbonates of the eastern Paris Basin. The paragenetic sequences are compared in both aquifers to propose a diagenetic model for the Middle and Late Jurassic deposits as a whole. Petrographic (optical and cathodoluminescence microscopy), structural (fracture orientations) and geochemical (δ18O, δ13C, REE) studies were conducted to characterize diagenetic cements, with a focus on blocky calcite cements, and their connection with fracturation events. Four generations of blocky calcite (Cal1-Cal4) are identified. Cal1 and Cal2 are widespread in the dominantly grain-supported facies of the Middle Jurassic limestones (about 90% of the cementation), whereas they are limited in the Oxfordian because grain-supported facies are restricted to certain stratigraphic levels. Cal1 and Cal2 blocky spars precipitated during burial in a reducing environment from mixed marine-meteoric waters and/or buffered meteoric waters. The meteoric waters probably entered aquifers during the Late Cimmerian (Jurassic/Cretaceous boundary) and Late Aptian (Early Cretaceous) unconformities. The amount of Cal2 cement is thought to be linked to the intensity of burial pressure dissolution, which in turn was partly controlled by the clay content of the host rocks. Cal3 and Cal4 are associated with telogenetic fracturing phases. The succession of Cal3 and Cal4 calcite relates to the transition towards oxidizing conditions during an opening of the system to meteoric waters at higher water/rock ratios. These meteoric fluids circulated along Pyrenean, Oligocene and Alpine fractures and generated both dissolution and subsequent cementation in Oxfordian vugs in mud-supported facies and in poorly stylolitized grainstones. However, these cements filled only the residual porosity in Middle Jurassic limestones. In addition to fluorine inputs, fracturation also permitted inputs of sulphur possibly due to weathering of Triassic or Purbeckian evaporites or H2S input during Paleogene times