Biomimetic Mineralizing Agents Recover the Micro Tensile Bond Strength of Demineralized Dentin

Biomimetic remineralization is an approach that mimics natural biomineralization, and improves adhesive procedures. The aim of this paper was to investigate the influence of Dentin Caries-like Lesions (DCLL)-Producing Model on microtensile bond strength (μTBS) of etch and rinse adhesive systems and investigate the effect of remineralizing agents such as Sodium Fluoride (NaF), MI Paste™ (MP) and Curodont™ Repair (CR) on caries-affected dentin (n = 6). Nine groups were established: (1) Sound dentin; (2) Demineralized dentin/Chemical DCLL: (3) Demineralized dentin/Biological DCLL; (4) Chemical/DCLL + NaF; (5) Chemical/DCLL + MP; (6) Chemical/DCLL + CR; (7) Biological/DCLL + NaF; (8) Biological/DCLL + MP; (9) Biological/DCLL + CR. Then all dentin blocks were subjected to a bonding procedure with Adper™ Single Bond 2 adhesive system/Filtek Z350XT 4 mm high block, following this they were immersed in deionized water/24 h and then sectioned with ≅1 mm2 beams. The μTBS test was conducted at 1 mm/min/500 N loading. Failure sites were evaluated by SEM (scanning electron microscopy (150×). μTBS data were submitted to factorial ANOVA and Tukey’s test (p < 0.05). The highest values were found when demineralized dentin was treated with MP and CR, regardless caries lesion depth (p < 0.05). There was a predominance of adhesive/mixed in the present study. It was concluded that the use of the artificial dentin caries production models produces differences in the μTBS. Additionally MP and CR remineralizing agents could enhance adhesive procedures even at different models of caries lesion

Validation of control of allergic rhinitis and asthma test for children (CARATKids)--a prospective multicenter study

BACKGROUND: Control of Allergic Rhinitis and Asthma Test for Children (CARATKids) is the first questionnaire that assesses simultaneously allergic rhinitis and asthma control in children. It was recently developed, but redundancy of questions and its psychometric properties were not assessed. This study aimed to (i) establish the final version of the CARATKids questionnaire and (ii) evaluate its reliability, responsiveness, cross-sectional validity, and longitudinal validity. METHODS: A prospective observational study was conducted in 11 Portuguese centers. During two visits separated by 6 wk, CARATKids, visual analog scale scales and childhood asthma control test were completed, and participant's asthma and rhinitis were evaluated by his/her physician without knowing the questionnaires' results. Data-driven item reduction was conducted, and internal consistency, responsiveness analysis, and associations with external measures of disease status were assessed. RESULTS: Of the 113 children included, 101 completed both visits. After item reduction, the final version of the questionnaire has 13 items, eight to be answered by the child and five by the caregiver. Its Cronbach's alpha was 0.80, the Guyatt's responsiveness index was -1.51, and a significant (p < 0.001) within-patient change of CARATKids score in clinical unstable patients was observed. Regarding cross-sectional validity, correlation coefficients of CARATKids with the external measures of control were between 0.45 and -0.69 and met the a priori predictions. In the longitudinal validity assessment, the correlation coefficients between the score changes of CARATKids and those of external measures of control ranged from 0.34 to 0.46

Enzymatic degradation of starch thermoplastic blends using samples of different thickness

The material studied was a thermoplastic blend of corn starch with a poly(ethylene-vinyl alcohol) copolymer, SEVA-C. The influence of both the material’s exposed surface and enzyme concentration on degradation kinetics was studied. As α-amylase is present in the blood plasma, experiments were performed, varying the material thickness and the α-amylase between 50 and 100 units/l, at 37°C, lasting up to 90 days. Four different batches using SEVA-C and starch samples of different thickness were performed. The positive correlation between degradation rate and the exposed material surface was confirmed, since thin films with larger exposed surfaces were degraded faster than thick square plates having the same total mass. The degradation extent depends on the total amount of amorphous starch present in the formulation rather than on the amount of enzyme used and the minimum thickness to ensure maximum degradation was estimated to be close to 0.25 mm

Proteins of Leishmania (Viannia) shawi confer protection associated with Th1 immune response and memory generation

<p>Abstract</p> <p>Background</p> <p><it>Leishmania (Viannia) shawi </it>parasite was first characterized in 1989. Recently the protective effects of soluble leishmanial antigen (SLA) from <it>L. (V.) shawi </it>promastigotes were demonstrated using BALB/c mice, the susceptibility model for this parasite. In order to identify protective fractions, SLA was fractionated by reverse phase HPLC and five antigenic fractions were obtained.</p> <p>Methods</p> <p>F1 fraction was purified from L. (V.) shawi parasite extract by reverse phase HPLC. BALB/c mice were immunized once a week for two consecutive weeks by subcutaneous routes in the rump, using 25 μg of F1. After 1 and 16 weeks of last immunization, groups were challenged in the footpad with L. (V.) shawi promastigotes. After 2 months, those same mice were sacrificed and parasite burden, cellular and humoral immune responses were evaluated.</p> <p>Results</p> <p>The F1 fraction induced a high degree of protection associated with an increase in IFN-γ, a decrease in IL-4, increased cell proliferation and activation of CD8⁺T lymphocytes. Long-term protection was acquired in F1-immunized mice, associated with increased CD4⁺central memory T lymphocytes and activation of both CD4⁺and CD8⁺T cells. In addition, F1-immunized groups showed an increase in IgG2a levels.</p> <p>Conclusions</p> <p>The inductor capability of antigens to generate memory lymphocytes that can proliferate and secrete beneficial cytokines upon infection could be an important factor in the development of vaccine candidates against American Tegumentary Leishmaniasis.</p

Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation

This study deals with different tool surface description methods used in the finite element analysis of sheet metal forming processes. The description of arbitrarily-shaped tool surfaces using the traditional linear finite elements is compared with two distinct smooth surface description approaches: (i) Bézier patches obtained from the ComputerAided Design model and (ii) smoothing the finite element mesh using Nagata patches. The contact search algorithm is presented for each approach, exploiting its special features in order to ensure an accurate and efficient contact detection. The influence of the tool modelling accuracy on the numerical results is analysed using two sheet forming examples, the unconstrained cylindrical bending and the reverse deep drawing of a cylindrical cup. Smoothing the contact surfaces with Nagata patches allows creating more accurate tool models, both in terms of shape and normal vectors, when compared with the conventional linear finite element mesh. The computational efficiency is evaluated in this study through the total number of increments and the required CPU time. The mesh refinement in the faceted description approach is not effective in terms of computational efficiency due to large discontinuities in the normal vector field across facets, even when adopting fine meshes.The authors gratefully acknowledge the financial support of the Portuguese Foundation for Science and Technology (FCT) via the projects PTDC/EME-TME/118420/2010 and PEst-C/EME/ UI0285/2013 and by FEDER funds through the program COMPETE – Programa Operacional Factores de Competitividade, under the project CENTRO-07-0224-FEDER-002001 (MT4MOBI). The first author is also grateful to the FCT for the PhD grant SFRH/BD/69140/2010.info:eu-repo/semantics/publishedVersio