A supercondutividade aplicada na sala de aula no ensino médio

Demostra as problemáticas que estão relacionadas com o ensino de física, e apresentar algumas sugestões que visar; dar uma pequena contribuição para a melhora da educação. Neste quadro, a supercondutividade pode ser utilizada pelo docente como uma ferramenta pedagógica para contribuir no processo cognitivo. Sendo assim, a implementação de demostrações e experiências nesta área tomam-se necessárias para complementação do processo de ensino-aprendizagem

Fundamentals, topologies and optimization methods of saturated iron core fault current limiter

The energy transition is a necessity to satisfy the consumption and impact of humanity on the environment. Therefore, to fulfill this demand, renewable energies and microgrids have been developed. Consequently, fault current levels have overcome the circuit breaker capacity in many substations over the years. Then, the development of the fault current limiters has become a potential solution to solve this problem. The literature has presented several topologies over the past decades. The saturated iron-core fault current limiter (SIC-SFCL) has exhibited promising results since this topology is tested in the distribution and transmission system substation. Thus, enforcements to increase the maturity of this equipment have been developed in different areas, for example, design, applied superconductor materials, and optimization models of the SIC-SFCL. This article has presented the fundamental concept of this equipment. Beyond that, the principal topologies have been discussed. The article has delivered further information about the main parts that comprise this equipment. Also, the authors have introduced different characteristics which affect the recovery times of this device. The authors have discussed the optimization methods applied to this equipment and after the conclusion is presented

Optimization of the Superconducting Linear Magnetic Bearing of a Maglev Vehicle

Considering the need for cost/performance prediction and optimization of superconducting maglev vehicles, we develop and validate here a 3D finite element model to simulate superconducting linear magnetic bearings. Then we reduce the 3D model to a 2D model in order to decrease the computing time. This allows us to perform in a reasonable time a stochastic optimization considering the superconductor properties and the vehicle operation. We look for the permanent magnet guideway geometry that minimizes the cost and maximizes the lateral force during a displacement sequence, with a constraint on the minimum levitation force. The displacement sequence reproduces a regular maglev vehicle operation with both vertical and lateral movements. For the sake of comparison, our reference is the SupraTrans prototype bearing. The results of the optimization suggest that the bearing cost could be substantially reduced, while keeping the same performances as the initial design. Alternatively, the performances could be significantly improved for the same original cost

Magnetic bearings with double crossed loops modelled with T-A formulation and electric circuits

The application of High-Temperature Superconductor (HTS) coils made of coated conductors has been investigated for many years. A possible configuration for such coils is the jointless loop, also known as the ring coil. The double crossed loop coil (DCLC) has been successfully applied in superconducting magnetic bearings (SMBs). The design of SMBs with DCLCs requires flexible modelling to allow all parts of the device to be represented. This work proposes the T-A formulation with a thin-film approximation for modelling SMB with DCLCs in the finite element analysis framework. A 2D representation of the system is coupled with an external electric circuit to model the continuity of the lines that represent the parts of each jointless loop. To couple the T-A formulation and the circuit, an average of the total electric field, with both resistive and inductive components, is applied to the circuit. The total current computed by the circuit is applied to the T-A formulation. The proposed methodology was validated by comparison with levitation force experimental data. Two types of tests were simulated: five levitation force tests and three guidance force tests. It is shown that there is a limit to the behaviour of the levitation force related to the high-loss state. Below this limit, the stack of DCLCs behaves as an equivalent bulk. Beyond this limit, a high-loss state appears as a linear growth of the levitation force. It is also shown that this high-loss state in vertical displacement influences the lateral force

2D Modeling of HTS Coils with T-A Formulation: How to Handle Different Coupling Scenarios

Numerical models based on the finite-element method (FEM) are popular tools for investigating the macroscopic electromagnetic behavior of high-temperature superconductor (HTS) applications. This article explains how to use the T-A formulation for modeling HTS coils in 2D with different coupling scenarios between the turns. First we consider a racetrack coil wound from one piece of superconducting tape. Then we consider a coil obtained by winding a cable composed of different HTS tapes. In the latter case, the tape turns are either electrically connected along their entire length or just at the two ends of the coil: in the model, these two different types of electrical connection are implemented with the help of the electrical circuit module. The current density distributions and the AC losses of the coils in the different coupling scenarios are compared and discussed. The limits of applicability of the presented approach are pointed out. The model is developed for the straight section of racetrack coils, but can be easily adapted to axisymmetric geometries

Coupled ElectromagneticThermal Simulation of a Power Transformer by 3D FEM

Power transformers are the most common equipment in an electric power system, which has been manufactured in the last decade. However, overheating can damage them, considerably reducing their operation lives, which may cause economic losses to the power utilities. The motivation of this paper is to investigate the time and power overload limits that a power transformer can be subjected to and how it will impact its temperature. Investments in the grid can be delayed if a transformer can support some overload during some momentary load demand increase. In this context, this paper presents a study of a 30/40MVA power transformer by 3D finite element method (FEM) for coupled thermal-electromagnetic simulations to investigate its thermal behaviour when it is submitted to its nominal load at a steady-state operation and a variable load during a period of one day. The simulations were performed with the commercial software packages Flux 3D and AcuSolve, for electromagnetic and thermal modelling, respectively. The modelled equipment was based on a power transformer installed in the Light Serviços de Eletricidade S.A, the utility that supplies electrical energy to the city of Rio de Janeiro, in Brazil. Since the literature doesn’t present many works simulating coupled thermal-electromagnetic power transformers in 3D-FEM, this paper has the goal to bring new contributions to this field. Three study cases were modelled, and some simplifications in transformer’s geometry were made in some of them to reduce the computation time usually required for such a simulation. The obtained results are presented and compared with the measured values for the temperature in the hot spot of the transformer and in the top of the oil, to investigate the impact of these simplifications in the calculated results

Rescuing the Brazilian Agave breeding program: morphophysiological and molecular characterization of a new germplasm

Agaves have been a valuable resource in dryland areas for centuries, providing fibers (sisal), food, and beverages. However, the advent of synthetic fibers has led to a decrease in research on Agave, resulting in the cessation of breeding programs in Brazil. With the rise of climate change, there is renewed interest in Agave for its potential as a biofuel feedstock in semiarid regions. Since 2016, we have been collecting Agave accessions throughout the country and retrieving what is left of Brazil’s original breeding program to establish a new germplasm bank. Here, we evaluated 21 of those accessions growing in the field. We used molecular markers and morphophysiological traits to characterize the plants. Based on the Mayahuelin molecular marker, we were able to reconstruct a phylogeny for the Brazilian accessions. The morphophysiological traits explained 34.6% of the phenotypic variation in the dataset, with physiological traits such as leaf water content, effective quantum efficiency of photosystem II (ΦPSII), and specific leaf mass (SLM) as the most significant traits. Specifically, we evaluated nine Agave species and found that the physiological traits, rather than the morphological ones, were the most significant. Leaf water content was negatively correlated with specific leaf mass, which could be used as a marker for selecting cultivars with higher biomass accumulation. Interestingly, ΦPSII and chlorophyll content were negatively correlated, suggesting photochemical adaptations throughout the rosette. Molecular and phenotypic data suggest that A. amaniensis, which is frequently considered a synonym of A. sisalana, is effectively another species. Overall, this study provides valuable information on the physiological traits of Brazilian Agave accessions and is a starting point for selecting more productive and climate-resilient cultivars for biorenewables production

Global Retinoblastoma Presentation and Analysis by National Income Level.

Importance: Early diagnosis of retinoblastoma, the most common intraocular cancer, can save both a child's life and vision. However, anecdotal evidence suggests that many children across the world are diagnosed late. To our knowledge, the clinical presentation of retinoblastoma has never been assessed on a global scale. Objectives: To report the retinoblastoma stage at diagnosis in patients across the world during a single year, to investigate associations between clinical variables and national income level, and to investigate risk factors for advanced disease at diagnosis. Design, Setting, and Participants: A total of 278 retinoblastoma treatment centers were recruited from June 2017 through December 2018 to participate in a cross-sectional analysis of treatment-naive patients with retinoblastoma who were diagnosed in 2017. Main Outcomes and Measures: Age at presentation, proportion of familial history of retinoblastoma, and tumor stage and metastasis. Results: The cohort included 4351 new patients from 153 countries; the median age at diagnosis was 30.5 (interquartile range, 18.3-45.9) months, and 1976 patients (45.4%) were female. Most patients (n = 3685 [84.7%]) were from low- and middle-income countries (LMICs). Globally, the most common indication for referral was leukocoria (n = 2638 [62.8%]), followed by strabismus (n = 429 [10.2%]) and proptosis (n = 309 [7.4%]). Patients from high-income countries (HICs) were diagnosed at a median age of 14.1 months, with 656 of 666 (98.5%) patients having intraocular retinoblastoma and 2 (0.3%) having metastasis. Patients from low-income countries were diagnosed at a median age of 30.5 months, with 256 of 521 (49.1%) having extraocular retinoblastoma and 94 of 498 (18.9%) having metastasis. Lower national income level was associated with older presentation age, higher proportion of locally advanced disease and distant metastasis, and smaller proportion of familial history of retinoblastoma. Advanced disease at diagnosis was more common in LMICs even after adjusting for age (odds ratio for low-income countries vs upper-middle-income countries and HICs, 17.92 [95% CI, 12.94-24.80], and for lower-middle-income countries vs upper-middle-income countries and HICs, 5.74 [95% CI, 4.30-7.68]). Conclusions and Relevance: This study is estimated to have included more than half of all new retinoblastoma cases worldwide in 2017. Children from LMICs, where the main global retinoblastoma burden lies, presented at an older age with more advanced disease and demonstrated a smaller proportion of familial history of retinoblastoma, likely because many do not reach a childbearing age. Given that retinoblastoma is curable, these data are concerning and mandate intervention at national and international levels. Further studies are needed to investigate factors, other than age at presentation, that may be associated with advanced disease in LMICs

The global retinoblastoma outcome study : a prospective, cluster-based analysis of 4064 patients from 149 countries

DATA SHARING : The study data will become available online once all analyses are complete.BACKGROUND : Retinoblastoma is the most common intraocular cancer worldwide. There is some evidence to suggest that major differences exist in treatment outcomes for children with retinoblastoma from different regions, but these differences have not been assessed on a global scale. We aimed to report 3-year outcomes for children with retinoblastoma globally and to investigate factors associated with survival. METHODS : We did a prospective cluster-based analysis of treatment-naive patients with retinoblastoma who were diagnosed between Jan 1, 2017, and Dec 31, 2017, then treated and followed up for 3 years. Patients were recruited from 260 specialised treatment centres worldwide. Data were obtained from participating centres on primary and additional treatments, duration of follow-up, metastasis, eye globe salvage, and survival outcome. We analysed time to death and time to enucleation with Cox regression models. FINDINGS : The cohort included 4064 children from 149 countries. The median age at diagnosis was 23·2 months (IQR 11·0–36·5). Extraocular tumour spread (cT4 of the cTNMH classification) at diagnosis was reported in five (0·8%) of 636 children from high-income countries, 55 (5·4%) of 1027 children from upper-middle-income countries, 342 (19·7%) of 1738 children from lower-middle-income countries, and 196 (42·9%) of 457 children from low-income countries. Enucleation surgery was available for all children and intravenous chemotherapy was available for 4014 (98·8%) of 4064 children. The 3-year survival rate was 99·5% (95% CI 98·8–100·0) for children from high-income countries, 91·2% (89·5–93·0) for children from upper-middle-income countries, 80·3% (78·3–82·3) for children from lower-middle-income countries, and 57·3% (52·1-63·0) for children from low-income countries. On analysis, independent factors for worse survival were residence in low-income countries compared to high-income countries (hazard ratio 16·67; 95% CI 4·76–50·00), cT4 advanced tumour compared to cT1 (8·98; 4·44–18·18), and older age at diagnosis in children up to 3 years (1·38 per year; 1·23–1·56). For children aged 3–7 years, the mortality risk decreased slightly (p=0·0104 for the change in slope). INTERPRETATION : This study, estimated to include approximately half of all new retinoblastoma cases worldwide in 2017, shows profound inequity in survival of children depending on the national income level of their country of residence. In high-income countries, death from retinoblastoma is rare, whereas in low-income countries estimated 3-year survival is just over 50%. Although essential treatments are available in nearly all countries, early diagnosis and treatment in low-income countries are key to improving survival outcomes.The Queen Elizabeth Diamond Jubilee Trust and the Wellcome Trust.https://www.thelancet.com/journals/langlo/homeam2023Paediatrics and Child Healt

Proposta de um mancal magnético supercondutor com fita de YBCO de segunda geração

Este trabalho propõe um novo tipo de mancal supercondutor usando fitas de YBCO de segunda gera ̧c ̃ao (2G). É utilizado um modelo fenomenológico para os cálculos de campo no material supercondutor, baseado no modelo de estado crítico.A implementação das simulações dos supercondutores com as modelagens propostas é realizada com a solução das equações diferenciais no espaço pelo Método de Elementos Finitos, enquanto que no tempo adota-se o Método das Diferenças Fini-tas. Os resultados experimentais de força de levitação de dois protótipos de rotores magnéticos para mancais supercondutores construídos com blocos maciços foram comparados com as simulações dos mancais implementados com as fitas 2G. Os cálculos de força de levitação realizados com as simulações mostraram o grande potencial das fitas 2G para a aplicação proposta, com acréscimo de aproximadamente 40% na pressão de levitação