Correction: CO2 induced phase transitions in diamine-appended metal-organic frameworks.

[This corrects the article DOI: 10.1039/C5SC01828E.]

Correction: CO2 induced phase transitions in diamine-appended metal-organic frameworks (Chemical Science (2015) 6 (5177-5185) DOI: 10.1039/c5sc01828e)

The authors regret that there are some discrepancies reproducing the data in the original article due to the determined coordinates not being the fully optimised geometries. The authors have provided more information as follows. In the manuscript entitled \u27CO2 induced phase transitions in diamine-appended metal-organic frameworks\u27, minor errors with the attached coordinates and energies reported in the paper have recently been identified. In this communication, we correct these errors. Here, we present updated optimized geometries and binding energies. We also take this opportunity to include an extended computational details section to ensure reproducibility. In addition, we show that the overall conclusions of the paper are not affected by these changes. A detailed comparison with the results reported by Lee et al.1 revealed that the DFT optimization of the coordinates provided with the manuscript do not lead to the values reported in the manuscript, and they warrant correction. Corrected coordinates and updated tables (Tables 1-7) and figures (Fig. 1, 2, 4 and 5) are included here for calculations using the PBE functional. These structures have been repeated using a slightly tighter force threshold than in the original manuscript (details below). The M06-L calculations reported in the original manuscript are not revisited since they were performed to assess the role of dispersion. Since the publication of our work in 2015, a far more detailed study of this effect has been published by one of the authors rendering these M06-L calculations unnecessary and we refer readers interested in the role of dispersion on the carbamate formation to this more recent study by Lee et al.1 In addition to correcting our DFT calculations, we examine the effects of the revised DFT values on the lattice model in this work.We recompute the lattice model with the M06-L and PBE values fromthe original manuscript as well as the corrected PBE values reported below (Fig. 6-8 and Tables 8-10). In all three sets of isotherm plots the ordering is preserved but the inflection points are spaced differently with the new PBE numbers, leading to quantitative differences that are nonetheless qualitatively similar to previous work. Finally, we discuss different ways that CO2 can coordinate to the metal binding site, as shown in Fig. 3. We should have notedmore clearly in ourmanuscript that these were starting configurations and not necessarily the final converged structures since our goal was to try several starting geometries to determine which coordination environment around the metal site was lowest in energy. Take for example bidentate insertion. Chemical intuition suggests that this structure could rotate to one that has only one CO2 oxygen center closer to the metal than the other and we observe this in our optimized structure. The resulting geometries we obtained for the starting arrangements noted in the figure are higher in energy than the chain model as reported in our original paper.We wish to emphasize that at the time of our 2015 study, our objective was to understand whether or not CO2 was bound to the metal and if one-dimensional chain formation could lead to a step in the adsorption isotherm. It has since become clear that a far more thorough study of the arrangements of the amines is required to truly understand competing amine arrangements preset in experiment. This was outside the scope of our work. Once more, these calculations are perhaps now outdated given work in the field in recent years. We again refer interested readers to a more recent study by Lee et al.1 1. Extended computational details to ensure reproducibility In the course of rectifying the error in our calculations, we wanted to ensure that all revised calculations were converged using the exact same protocol; therefore, we repeated the PBE calculations for the pair and chain models using updated computational details given here to ensure reproducibility. The M2(dobpdc) MOF contains six unsaturated metal sites per unit cell. To calculate the binding energies of CO2 in its amine appended analogue mmen-M2(dobpdc), one mmen ligand per CO2 was added per unit cell. The smaller sized ethylenediamine (en) was used to saturate the remaining amines not involved in CO2 binding. In the case of the pair mode, two mmen-amines are included per unit cell only. All DFT calculations were performed with periodic boundary conditions carried out using the VASP 5.4.4 package (original calculations were performed with VASP 5.3.3). The PBE functional was employed to examine the energetics of CO2 adsorption.3 On-site Hubbard U corrections were employed for metal d electrons.4 The U values are determined to reproduce oxidation energies in the respective metal oxides and are given in the tables below. The electron-ion interactions in these calculations were described with the projector augmented wave (PAW) method developed by Blöchl with an energy cutoff of 550 eV.5 This combination of the PBE functional, PAW scheme, and energy cutoff was used for full geometry optimization of the various species investigated until the forces on all atoms were smaller than 0.02 eV Å-1 and the SCF convergence was set to 1 × 10-7 eV. Given the large size of the unit cell and the tests with other numbers of K-points from the original study, only results obtained from G-point calculations are reported here. Finally, heats of adsorption are now reported below along with E + ZPE values, while in the original manuscript only E + ZPE were reported. No changes were made to how the vibrational corrections were computed; however, we have included some additional details to ensure reproducibility.6 Harmonic vibrational modes (ωi) were computed for CO2 in the gas phase and its bound product state (amine-CO2-MOF complex). The framework itself was taken to be rigid and only the vibrational modes associated with the motion of the amine, the metal center, first coordination sphere (oxygen atoms bound to the metal in the MOF backbone), and (if present) the bound CO2 were computed. Since the harmonic approximation breaks down for low frequency modes, we replaced all modes less than 50 cm-1 with 50 cm-1 when computing the zero-point and thermal energies. The following standard harmonic expressions were used to compute the vibrational corrections: Zero-point vibrational energy (ZPE) is: [Equation presented here] While for the bound product, the rotational and translational degrees of freedom of CO2 have been converted to additional vibrational modes allowing one to compute the thermal correction simply as: [Equation presented here] 2. Values for the chain model The chain model used in our original study included 1 mmen- and 5 en-amines. The values from the original paper are reported in Table 1. When we repeat these calculations using the procedure described in Section 1, we obtain the values in Table 2. In addition to the chain model described above (1 mmen- and 5 en-amines per unit cell), during our original study we performed calculations with another model that was not included in the manuscript since its values yielded results further from experiment. This model includes only 1 mmen-amine per unit cell (no other amines) and was used to test the assumption that the five enamines are indeed spectators with respect to the metal dependence of the binding energy. We present the results from this model in Table 3. In the original paper we noted that the energy and bond length trends are correlated and are consistent with the Irving-Williams series. This is no longer true for all metals under investigation, with Zn being an outlier. The results for Zn can be explained by more recent work.1 3. Values for the pair model The model used to compute the pair adsorption mechanisms included 2 mmen-amines and 0 en-amines. The values in the original paper are presented in Table 5. 4. Lattice model plots The lattice models to generate adsorption isotherms for these systems were run at one temperature (∼25 °C) using four different input parameters. First the M06-L and PBE values from the original paper were used once more as it has been some time since we have run the lattice model. Then the model is repeated with the new set of values from PBE. If we compare Fig. 7 and 8, the order is preserved, but the infliction points are spaced a bit differently. This is due to the scaling factor being constant and is something we scaled for each of the different systems as well. The slope is also a bit different, but not more then we should expect for this simple lattice model. Furthermore, we only ever aimed to reproduce the step and the order of the metals. Any finer details cannot be expected to be obtained from this model. The exact values used to compute the isotherms are given in the tables below. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers

Does online information drive offline revenues? Only for specific products and consumer segments!

While many offline retailers have developed informational websites that offer information on products and prices, the key question for such informational websites is whether they can increase revenues via web-to-store shopping. The current paper draws on the information search literature to specify and test hypotheses regarding the offline revenue impact of adding an informational website. Explicitly considering marketing efforts, a latent class model distinguishes consumer segments with different short-term revenue effects, while a Vector Autoregressive model on these segments reveals different long-term marketing response.We find that the offline revenue impact of the informational website critically depends on the product category and customer segment. The lower online search costs are especially beneficial for sensory products and for customers distant from the store. Moreover, offline revenues increase most for customers with high web visit frequency. We find that customers in some segments buy more and more expensive products, suggesting that online search and offline purchases are complements. In contrast, customers in a particular segment reduce their shopping trips, suggesting their online activities partially substitute for experiential shopping in the physical store. Hence, offline retailers should use specific online activities to target specific product categories and customer segments.Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO)pre-prin

CO2 induced phase transitions in diamine-appended metal-organic frameworks

Using a combination of density functional theory and lattice models, we study the effect of CO2 adsorption in an amine functionalized metal-organic framework. These materials exhibit a step in the adsorption isotherm indicative of a phase change. The pressure at which this step occurs is not only temperature dependent but is also metal center dependent. Likewise, the heats of adsorption vary depending on the metal center. Herein we demonstrate via quantum chemical calculations that the amines should not be considered firmly anchored to the framework and we explore the mechanism for CO2 adsorption. An ammonium carbamate species is formed via the insertion of CO2 into the M-Namine bonds. Furthermore, we translate the quantum chemical results into isotherms using a coarse grained Monte Carlo simulation technique and show that this adsorption mechanism can explain the characteristic step observed in the experimental isotherm while a previously proposed mechanism cannot. Furthermore, metal analogues have been explored and the CO2 binding energies show a strong metal dependence corresponding to the M-Namine bond strength. We show that this difference can be exploited to tune the pressure at which the step in the isotherm occurs. Additionally, the mmen-Ni-2(dobpdc) framework shows Langmuir like behavior, and our simulations show how this can be explained by competitive adsorption between the new model and a previously proposed model

Translational and Rotational Motion of C8 Aromatics Adsorbed in Isotropic Porous Media (MOF-5): NMR Studies and MD Simulations

We combined nuclear magnetic resonance (NMR) and molecular dynamics (MD) simulation to study xylene behavior in MOF-5, probing the effects of adsorbate geometry in a weakly interacting model isotropic metal organic framework (MOF) system. We employed NMR diffusometry and relaxometry techniques at low field (13 MHz) to quantify the self -diffusion coefficients (Ds) and the longitudinal relaxation times (T-1) of xylenes in MOF-5 as a function of temperature at the saturated loading for each xylene. These "experiments reveal the translational motion activation energies to be 15.3, 19.7, and 21.2 kj mol(-1) and the rotational activation energies to be 47.26, 12.88, and 11.55 for the (p-, m-, o-) xylene isomers, respectively. Paraxylene exhibits faster translational motion, yet shows four times the activation energy barrier for rotational motion vis-a-vis the other isomers. MD simulations performed on these model systems corroborate the findings for paraxylene and suggest that paraxylene has the lower free energy barrier for hopping away from its binding sites, yet has the slowest rotational motion in the plane of the xylene molecule

Thermodynamics of small systems embedded in a reservoir: a detailed analysis of finite size effects

International audienceWe present a detailed study on the finite size scaling behaviour of thermodynamic properties for small systems of particles embedded in a reservoir. Previously, we derived that the leading finite size effects of thermodynamic properties for small systems scale with the inverse of the linear length of the small system, and we showed how this can be used to describe systems in the thermodynamic limit [Chem. Phys. Lett. 504, 199 (2011)]. This approach takes into account an effective surface energy, as a result of the non-periodic boundaries of the small embedded system. Deviations from the linear behaviour occur when the small system becomes very small, i.e. smaller than three times the particle diameter in each direction. At this scale, so-called nook-and corner effects will become important. In this work, we present a detailed analysis to explain this behaviour. In addition, we present a model for the finite size scaling when the size of the small system is of the same order of magnitude as the reservoir. The developed theory is validated using molecular simulations of systems containing Lennard-Jones and WCA particles, and leads to significant improvements over our previous approach. Our approach eventually leads to an efficient method to compute the thermodynamic factor of macroscopic systems from finite size scaling, which is for example required for converting Fick and Maxwell-Stefan transport diffusivities

Nanoporous Materials Can Tune the Critical Point of a Pure Substance.

Molecular simulations and NMR relaxometry experiments demonstrate that pure benzene or xylene confined in isoreticular metal-organic frameworks (IRMOFs) exhibit true vapor-liquid phase equilibria where the effective critical point may be reduced by tuning the structure of the MOF. Our results are consistent with vapor and liquid phases extending over many MOF unit cells. These results are counterintuitive since the MOF pore diameters are approximately the same length scale as the adsorbate molecules. As applications of these materials in catalysis, separations, and gas storage rely on the ability to tune the properties of adsorbed molecules, we anticipate that the ability to systematically control the critical point, thereby preparing spatially inhomogeneous local adsorbate densities, could add a new design tool for MOF applications