28 research outputs found
Tuning of Kilopixel Transition Edge Sensor Bolometer Arrays with a Digital Frequency Multiplexed Readout System
A digital frequency multiplexing (DfMUX) system has been developed and used
to tune large arrays of transition edge sensor (TES) bolometers read out with
SQUID arrays for mm-wavelength cosmology telescopes. The DfMUX system
multiplexes the input bias voltages and output currents for several bolometers
on a single set of cryogenic wires. Multiplexing reduces the heat load on the
camera's sub-Kelvin cryogenic detector stage. In this paper we describe the
algorithms and software used to set up and optimize the operation of the
bolometric camera. The algorithms are implemented on soft processors embedded
within FPGA devices operating on each backend readout board. The result is a
fully parallelized implementation for which the setup time is independent of
the array size.Comment: 5 pages, 4 figure
Calibrating CHIME, A New Radio Interferometer to Probe Dark Energy
The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a transit
interferometer currently being built at the Dominion Radio Astrophysical
Observatory (DRAO) in Penticton, BC, Canada. We will use CHIME to map neutral
hydrogen in the frequency range 400 -- 800\,MHz over half of the sky, producing
a measurement of baryon acoustic oscillations (BAO) at redshifts between 0.8 --
2.5 to probe dark energy. We have deployed a pathfinder version of CHIME that
will yield constraints on the BAO power spectrum and provide a test-bed for our
calibration scheme. I will discuss the CHIME calibration requirements and
describe instrumentation we are developing to meet these requirements
Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder
A pathfinder version of CHIME (the Canadian Hydrogen Intensity Mapping
Experiment) is currently being commissioned at the Dominion Radio Astrophysical
Observatory (DRAO) in Penticton, BC. The instrument is a hybrid cylindrical
interferometer designed to measure the large scale neutral hydrogen power
spectrum across the redshift range 0.8 to 2.5. The power spectrum will be used
to measure the baryon acoustic oscillation (BAO) scale across this poorly
probed redshift range where dark energy becomes a significant contributor to
the evolution of the Universe. The instrument revives the cylinder design in
radio astronomy with a wide field survey as a primary goal. Modern low-noise
amplifiers and digital processing remove the necessity for the analog
beamforming that characterized previous designs. The Pathfinder consists of two
cylinders 37\,m long by 20\,m wide oriented north-south for a total collecting
area of 1,500 square meters. The cylinders are stationary with no moving parts,
and form a transit instrument with an instantaneous field of view of
100\,degrees by 1-2\,degrees. Each CHIME Pathfinder cylinder has a
feedline with 64 dual polarization feeds placed every 30\,cm which
Nyquist sample the north-south sky over much of the frequency band. The signals
from each dual-polarization feed are independently amplified, filtered to
400-800\,MHz, and directly sampled at 800\,MSps using 8 bits. The correlator is
an FX design, where the Fourier transform channelization is performed in FPGAs,
which are interfaced to a set of GPUs that compute the correlation matrix. The
CHIME Pathfinder is a 1/10th scale prototype version of CHIME and is designed
to detect the BAO feature and constrain the distance-redshift relation.Comment: 20 pages, 12 figures. submitted to Proc. SPIE, Astronomical
Telescopes + Instrumentation (2014
EBEX: A balloon-borne CMB polarization experiment
EBEX is a NASA-funded balloon-borne experiment designed to measure the
polarization of the cosmic microwave background (CMB). Observations will be
made using 1432 transition edge sensor (TES) bolometric detectors read out with
frequency multiplexed SQuIDs. EBEX will observe in three frequency bands
centered at 150, 250, and 410 GHz, with 768, 384, and 280 detectors in each
band, respectively. This broad frequency coverage is designed to provide
valuable information about polarized foreground signals from dust. The
polarized sky signals will be modulated with an achromatic half wave plate
(AHWP) rotating on a superconducting magnetic bearing (SMB) and analyzed with a
fixed wire grid polarizer. EBEX will observe a patch covering ~1% of the sky
with 8' resolution, allowing for observation of the angular power spectrum from
\ell = 20 to 1000. This will allow EBEX to search for both the primordial
B-mode signal predicted by inflation and the anticipated lensing B-mode signal.
Calculations to predict EBEX constraints on r using expected noise levels show
that, for a likelihood centered around zero and with negligible foregrounds,
99% of the area falls below r = 0.035. This value increases by a factor of 1.6
after a process of foreground subtraction. This estimate does not include
systematic uncertainties. An engineering flight was launched in June, 2009,
from Ft. Sumner, NM, and the long duration science flight in Antarctica is
planned for 2011. These proceedings describe the EBEX instrument and the North
American engineering flight.Comment: 12 pages, 9 figures, Conference proceedings for SPIE Millimeter,
Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V
(2010
First implementation of TES bolometer arrays with SQUID-based multiplexed readout on a balloon-borne platform
EBEX (the E and B EXperiment) is a balloon-borne telescope designed to measure the polarisation of the cosmic microwave background radiation. During a two week long duration science flight over Antarctica, EBEX will operate 768, 384 and 280 spider-web transition edge sensor (TES) bolometers at 150, 250 and 410 GHz, respectively. The 10-hour EBEX engineering flight in June 2009 over New Mexico and Arizona provided the first usage of both a large array of TES bolometers and a Superconducting QUantum Interference Device (SQUID) based multiplexed readout in a space-like environment. This successful demonstration increases the technology readiness level of these bolometers and the associated readout system for future space missions. A total of 82, 49 and 82 TES detectors were operated during the engineering flight at 150, 250 and 410 GHz. The sensors were read out with a new SQUID-based digital frequency domain multiplexed readout system that was designed to meet the low power consumption and robust autonomous operation requirements presented by a balloon experiment. Here we describe the system and the remote, automated tuning of the bolometers and SQUIDs. We compare results from tuning at float to ground, and discuss bolometer performance during fligh