Properties of the ferrimagnetic double-perovskite A_{2}FeReO_{6} (A=Ba and Ca)

Ceramics of A_{2}FeReO_{6} double-perovskite have been prepared and studied for A=Ba and Ca. Ba_{2}FeReO_{6} has a cubic structure (Fm3m) with $a\approx$8.0854(1) \AA whereas Ca_{2}FeReO_{6} has a distorted monoclinic symmetry with $a\approx 5.396(1) \AA, b\approx 5.522(1) \AA, c\approx 7.688(2) \AA$ and $\beta =90.4^{\circ} (P21/n)$. The barium compound is metallic from 5 K to 385 K, i.e. no metal-insulator transition has been seen up to 385 K, and the calcium compound is semiconducting from 5 K to 385 K. Magnetization measurements show a ferrimagnetic behavior for both materials, with T_{c}=315 K for Ba_{2}FeReO_{6} and above 385 K for Ca_{2}FeReO_{6}. A specific heat measurement on the barium compound gave an electron density of states at the Fermi level, N(E_{F}) equal to 6.1$\times 10^{24} eV^{-1}mole^{-1}$. At 5 K, we observed a negative magnetoresistance of 10 % in a magnetic field of 5 T, but only for Ba_{2}FeReO_{6}. Electrical, thermal and magnetic properties are discussed and compared to the analogous compounds Sr_{2}Fe(Mo,Re)O_{6}.Comment: 5 pages REVTeX, 7 figures included, submitted to PR

Increased susceptibility to repeated freeze-thaw cycles in Escherichia coli following long-term evolution in a benign environment

BACKGROUND: In order to study the dynamics of evolutionary change, 12 populations of E. coli B were serially propagated for 20,000 generations in minimal glucose medium at constant 37°C. Correlated changes in various other traits have been previously associated with the improvement in competitive fitness in the selective environment. This study examines whether these evolved lines changed in their ability to tolerate the stresses of prolonged freezing and repeated freeze-thaw cycles during adaptation to a benign environment. RESULTS: All 12 lines that evolved in the benign environment for 20,000 generations are more sensitive to freeze-thaw cycles than their ancestor. The evolved lines have an average mortality rate of 54% per daily cycle, compared to the ancestral rate of 34%. By contrast, there was no significant difference between the evolved lines and their ancestor in mortality during prolonged freezing. There was also some variability among the evolved lines in susceptibility to repeated freeze-thaw cycles. Those lines that had evolved higher competitive fitness in the minimal glucose medium at 37°C also had higher mortality during freeze-thaw cycles. This variability was not associated, however, with differences among lines in DNA repair functionality and mutability. CONCLUSION: The consistency of the evolutionary declines in freeze-thaw tolerance, the correlation between fitness in glucose medium at 37°C and mortality during freeze-thaw cycles, and the absence of greater declines in freeze-thaw survival among the hypermutable lines all indicate a trade-off between performance in minimal glucose medium at 37°C and the capacity to tolerate this stress. Analyses of the mutations that enhance fitness at 37°C may shed light on the physiological basis of this trade-off

Designing and engineering evolutionary robust genetic circuits

<p>Abstract</p> <p>Background</p> <p>One problem with engineered genetic circuits in synthetic microbes is their stability over evolutionary time in the absence of selective pressure. Since design of a selective environment for maintaining function of a circuit will be unique to every circuit, general design principles are needed for engineering evolutionary robust circuits that permit the long-term study or applied use of synthetic circuits.</p> <p>Results</p> <p>We first measured the stability of two BioBrick-assembled genetic circuits propagated in <it>Escherichia coli </it>over multiple generations and the mutations that caused their loss-of-function. The first circuit, T9002, loses function in less than 20 generations and the mutation that repeatedly causes its loss-of-function is a deletion between two homologous transcriptional terminators. To measure the effect between transcriptional terminator homology levels and evolutionary stability, we re-engineered six versions of T9002 with a different transcriptional terminator at the end of the circuit. When there is no homology between terminators, the evolutionary half-life of this circuit is significantly improved over 2-fold and is independent of the expression level. Removing homology between terminators and decreasing expression level 4-fold increases the evolutionary half-life over 17-fold. The second circuit, I7101, loses function in less than 50 generations due to a deletion between repeated operator sequences in the promoter. This circuit was re-engineered with different promoters from a promoter library and using a kanamycin resistance gene (<it>kanR</it>) within the circuit to put a selective pressure on the promoter. The evolutionary stability dynamics and loss-of-function mutations in all these circuits are described. We also found that on average, evolutionary half-life exponentially decreases with increasing expression levels.</p> <p>Conclusions</p> <p>A wide variety of loss-of-function mutations are observed in BioBrick-assembled genetic circuits including point mutations, small insertions and deletions, large deletions, and insertion sequence (IS) element insertions that often occur in the scar sequence between parts. Promoter mutations are selected for more than any other biological part. Genetic circuits can be re-engineered to be more evolutionary robust with a few simple design principles: high expression of genetic circuits comes with the cost of low evolutionary stability, avoid repeated sequences, and the use of inducible promoters increases stability. Inclusion of an antibiotic resistance gene within the circuit does not ensure evolutionary stability.</p

Analysis of United Kingdom Off-Highway Construction Machinery Market and Its Consumers Using New-Sales Data

The off-highway construction machinery market and its consumers have attracted minimal previous research. This study addresses that void by analyzing annual United Kingdom (UK) (volume/portfolio) new-sales data for the 10 most popular products within that market, 1990–2010 inclusive. Graphical, descriptive statistical, Pearson-correlational, autocorrelational, and elementary modeling are employed to identify contrasts in sales regarding (1) high- and low-volume items; (2) growth trends and significant recessionary effects on volumes; (3) a demand change point circa 1997, since when annual product portfolio has changed little; and (4) product associations in consumer demand. Significant association is demonstrated between demand and construction output, especially with the value of new housing. Subsequently, consumption of wheeled loaders is modeled using construction volume, and demand for mini and crawler excavators is modeled using new-housing data. Time series trends for these machinery types are presented and forecast through 2015. The primary contribution of this study is a deeper understanding of the UK new-machinery market and the predilections of its consumers over the last two decades (to present)

Superconducting to spin glass state transformation in {\ss}-pyrochlore KxOs2O6

{\ss}-pyrochore KOs2O6, which shows superconductivity below ~ 9.7K, has been converted into KxOs2O6 (x < 2/3 - 1/2) electrochemically to show spin glass-like behavior below ~ 6.1K. Room temperature sample surface potential versus charge transfer scan indicates that there are at least two two-phase regions for x between 1 and 0.5. Rattling model of superconductivity for the title compound has been examined using electrochemical potassium de-intercalation. The significant reduction of superconducting volume fraction due to minor potassium reduction suggests the importance of defect and phase coherence in the rattling model. Magnetic susceptibility, resistivity, and specific heat measurement results have been compared between the superconducting and spin glass-like samples.Comment: 8 pages, 7 figures, 1 tabl

In-Fusion BioBrick assembly and re-engineering

Genetic circuits can be assembled from standardized biological parts called BioBricks. Examples of BioBricks include promoters, ribosome-binding sites, coding sequences and transcriptional terminators. Standard BioBrick assembly normally involves restriction enzyme digestion and ligation of two BioBricks at a time. The method described here is an alternative assembly strategy that allows for two or more PCR-amplified BioBricks to be quickly assembled and re-engineered using the Clontech In-Fusion PCR Cloning Kit. This method allows for a large number of parallel assemblies to be performed and is a flexible way to mix and match BioBricks. In-Fusion assembly can be semi-standardized by the use of simple primer design rules that minimize the time involved in planning assembly reactions. We describe the success rate and mutation rate of In-Fusion assembled genetic circuits using various homology and primer lengths. We also demonstrate the success and flexibility of this method with six specific examples of BioBrick assembly and re-engineering. These examples include assembly of two basic parts, part swapping, a deletion, an insertion, and three-way In-Fusion assemblies

Theory of Transition Temperature of Magnetic Double Perovskites

We formulate a theory of double perovskite coumpounds such as Sr$_2$FeReO$_6$ and Sr$_2$FeMoO$_6$ which have attracted recent attention for their possible uses as spin valves and sources of spin polarized electrons. We solve the theory in the dynamical mean field approximation to find the magnetic transition temperature $T_c$. We find that $T_c$ is determined by a subtle interplay between carrier density and the Fe-Mo/Re site energy difference, and that the non-Fe same-sublattice hopping acts to reduce $T_c$. Our results suggest that presently existing materials do not optimize $T_c$

Searching for the Slater Transition in the Pyrochlore Cd2_{2}Os2_{2}O7_{7} with Infrared Spectroscopy

Infrared reflectance measurements were made on the single crystal pyrochlore Cd$_{2}$Os$_{2}$O$_{7}$ in order to examine the transformations of the electronic structure and crystal lattice across the boundary of the metal insulator transition at $T_{MIT}=226K$. All predicted IR active phonons are observed in the conductivity over all temperatures and the oscillator strength is found to be temperature independent. These results indicate that charge ordering plays only a minor role in the MIT and that the transition is strictly electronic in nature. The conductivity shows the clear opening of a gap with $2\Delta=5.2k_{B}T_{MIT}$. The gap opens continuously, with a temperature dependence similar to that of BCS superconductors, and the gap edge having a distinct $\sigma(\omega)\thicksim\omega^{1/2}$ dependence. All of these observables support the suggestion of a Slater transition in Cd$_{2}$Os$_{2}$O$_{7}$.Comment: 4 pages, 4 figure

Dynamical Mean Field Theory of Double Perovskite Ferrimagnets

The dynamical mean field method is used to analyze the magnetic transition temperature and optical conductivity of a model for the ferrimagnetic double perovskites such as $Sr_2FeMoO_6$. The calculated transition temperatures and optical conductivities are found to depend sensitively on the band structure. For parameters consistent with local spin density approximation band calculations, the computed transition temperatures are lower than observed, and in particular decrease dramatically as band filling is increased, in contradiction to experiment. Band parameters which would increase the transition temperature are identified.Comment: Supercedes cond-mat/000628 (PRB64 024424/1-4 (2001