High brightness solution-processed OLEDs employing linear, small molecule emitters

Two novel linear oligomers that can be solution-processed to form green organic light-emitting diodes (OLEDs) are reported. Each oligomer has a donor-acceptor structure, incorporating a benzothiadiazole core with bifluorene arms attached at the 4- and 7-positions. Further electron donor behaviour is inferred from a terminal triphenylamine unit in Green 2. The resulting solution-processed OLEDs exhibited excellent performance, with a maximum luminance of 20 388 cd m-2 recorded for Green 2

RGB and white-emitting organic lasers on flexible glass

Two formats of multiwavelength red, green and blue (RGB) laser on mechanically-flexible glass are demonstrated. In both cases, three all-organic, vertically-emitting distributed feedback (DFB) lasers are assembled onto a common ultra-thin glass membrane substrate and fully encapsulated by a thin polymer overlayer and an additional 50µm-thick glass membrane in order to improve the performance. The first device format has the three DFB lasers sitting next to each other on the glass substrate. The DFB lasers are simultaneously excited by a single overlapping optical pump, emitting spatially separated red, green and blue laser output with individual thresholds of, respectively, 28 µJ/cm2, 11 µJ/cm2 and 32 µJ/cm2 (for 5 ns pump pulses). The second device format has the three DFB lasers, respectively the red, green and blue laser, vertically stacked onto the flexible glass. This device format emits a white laser output for an optical pump fluence above 42 µJ/cm2

Acceptor-donor-acceptor small molecules based on derivatives of 3,4-ethylenedioxythiophene for solution processed organic solar cells

Three simple semiconducting acceptor-donor-acceptor (A-D-A) small molecules based on an electron-rich (3,4-ethylenedioxythiophene) EDOT central core have been synthesised (DIN-2TE, DRH-2TE, DECA-2TE) and characterised. Organic photovoltaic (OPV) devices incorporating these materials have been prepared and evaluated. The physical properties of the molecules were characterised by TGA, DSC, UV/vis spectroscopy and cyclic voltammetry. The optical HOMO-LUMO energy gaps of the molecules in the solid state were in the range 1.57-1.82 eV, and in solution 1.88-2.04 eV. Electrochemical HOMO-LUMO energy gaps determined by cyclic voltammetry were found to be in the range 1.97-2.31 eV. The addition of 1% 1,8-diiodooctane (DIO) to photoactive blends of the A-D-A molecules and PC71BM more than doubled the power conversion efficiency (PCE) in the case of DRH-2TE:PC71BM devices to 1.36%

An ambipolar BODIPY derivative for a white exciplex OLED and cholesteric liquid crystal laser toward multifunctional devices

A new interface engineering method is demonstrated for the preparation of an efficient white organic light-emitting diode (WOLED) by embedding an ultrathin layer of the novel ambipolar red emissive compound 4,4-difluoro-2,6-di(4-hexylthiopen-2-yl)-1,3,5,7,8-pentamethyl-4-bora-3a,4a-diaza-s-indacene (bThBODIPY) in the exciplex formation region. The compound shows a hole and electron mobility of 3.3 × 10–4 and 2 × 10–4 cm2 V–1 s–1, respectively, at electric fields higher than 5.3 × 105 V cm–1. The resulting WOLED exhibited a maximum luminance of 6579 cd m–2 with CIE 1931 color coordinates (0.39; 0.35). The bThBODIPY dye is also demonstrated to be an effective laser dye for a cholesteric liquid crystal (ChLC) laser. New construction of the ChLC laser, by which a flat capillary with an optically isotropic dye solution is sandwiched between two dye-free ChLC cells, provides photonic lasing at a wavelength well matched with that of a dye-doped planar ChLC cell

Organic semiconductor laser platform for the detection of DNA by AgNP plasmonic enhancement

Organic semiconductor lasers are a sensitive biosensing platform that respond to specific biomolecule binding events. So far, such biosensors have utilized protein-based interactions for surface functionalization but a nucleic acid–based strategy would considerably widen their utility as a general biodiagnostic platform. This manuscript reports two important advances for DNA-based sensing using an organic semiconductor (OS) distributed feedback (DFB) laser. First, the immobilization of alkyne-tagged 12/18-mer oligodeoxyribonucleotide (ODN) probes by Cu-catalyzed azide alkyne cycloaddition (CuAAC) or “click-chemistry” onto an 80 nm thick OS laser film modified with an azide-presenting polyelectrolyte monolayer is presented. Second, sequence-selective binding to these immobilized probes with complementary ODN-functionalized silver nanoparticles, is detected. As binding occurs, the nanoparticles increase the optical losses of the laser mode through plasmonic scattering and absorption, and this causes a rise in the threshold pump energy required for laser action that is proportional to the analyte concentration. By monitoring this threshold, detection of the complementary ODN target down to 11.5 pM is achieved. This complementary binding on the laser surface is independently confirmed through surface-enhanced Raman spectroscopy (SERS)

An air-stable DPP-thieno-TTF copolymer for single-material solar cell devices and field effect transistors

Following an approach developed in our group to incorporate tetrathiafulvalene (TTF) units into conjugated polymeric systems, we have studied a low band gap polymer incorporating TTF as a donor component. This polymer is based on a fused thieno-TTF unit that enables the direct incorporation of the TTF unit into the polymer, and a second comonomer based on the diketopyrrolopyrrole (DPP) molecule. These units represent a donor–acceptor copolymer system, p(DPP-TTF), showing strong absorption in the UV–visible region of the spectrum. An optimized p(DPP-TTF) polymer organic field effect transistor and a single material organic solar cell device showed excellent performance with a hole mobility of up to 5.3 × 10–2 cm2/(V s) and a power conversion efficiency (PCE) of 0.3%, respectively. Bulk heterojunction organic photovoltaic devices of p(DPP-TTF) blended with phenyl-C71-butyric acid methyl ester (PC71BM) exhibited a PCE of 1.8%

Synthesis and properties of novel star-shaped oligofluorene conjugated systems with BODIPY cores

Star-shaped conjugated systems with varying oligofluorene arm length and substitution patterns of the central BODIPY core have been synthesised, leading to two families of compounds, T-B1–T-B4 and Y-B1–Y-B4, with T- and Y-shaped motifs, respectively. Thermal stability, cyclic voltammetry, absorption and photoluminescence spectroscopy of each member of these two families were studied in order to determine their suitability as emissive materials in photonic applications

Influence of optical material properties on strong coupling in organic semiconductor based microcavities

The optical properties of organic semiconductors are generally characterised by a number of material specific parameters, including absorbance, photoluminescence quantum yield, Stokes shift, and molecular orientation. Here, we study four different organic semiconductors and compare their optical properties to the characteristics of the exciton-polaritons that are formed when these materials are introduced into metal-clad microcavities. We find that the strength of coupling between cavity photons and excitons is clearly correlated with the absorptivity of the material. In addition, we show that anisotropy strongly affects the characteristics of the formed exciton-polaritons

An experimental and theoretical study of exciplex-forming compounds containing trifluorobiphenyl and 3,6-di-tert-butylcarbazole units and their performances in OLEDs

Derivatives of trifluorobiphenyl and 3,6-di-tert-butylcarbazole were synthesised as potential components of emitting layers of OLEDs. Molecular design of the compounds was performed taking into consideration the hydrogen bonding ability of the fluorine atom and electron-donating ability of the carbazole moiety. Their toluene solutions exhibited very high triplet-energy values of 3.03 eV and 3.06 eV. Ionisation energies of the compounds in the solid-state were found to be in the range from 5.98 to 6.17 eV. Density functional theory (DFT) calculations using the ωB97XD functional, with the ω parameter tuned in the presence of the solvent, uncovered singlet–triplet energy splitting in good agreement with the experimental results. The materials were tested in the emissive layers of OLEDs, showing the ability to form exciplexes with complementary electron-accepting 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine. Using the synthesised compounds as exciplex-forming materials, highly efficient exciplex emission-based OLEDs were developed. In the best case, a high maximum current efficiency of 24.8 cd A−1, and power and external quantum efficiencies of 12.2 lm W−1 and 7.8%, respectively, were achieved

Synthesis and properties of novel star-shaped oligofluorene conjugated systems with BODIPY cores

Star-shaped conjugated systems with varying oligofluorene arm length and substitution patterns of the central BODIPY core have been synthesised, leading to two families of compounds, T-B1-T-B4 and Y-B1-Y-B4, with T- and Y-shaped motifs, respectively. Thermal stability, cyclic voltammetry, absorption and photoluminescence spectroscopy of each member of these two families were studied in order to determine their suitability as emissive materials in photonic applications