OTIS 3.2 Software Released

Trajectory, mission, and vehicle engineers concern themselves with finding the best way for an object to get from one place to another. These engineers rely upon special software to assist them in this. For a number of years, many engineers have used the OTIS program for this assistance. With OTIS, an engineer can fully optimize trajectories for airplanes, launch vehicles like the space shuttle, interplanetary spacecraft, and orbital transfer vehicles. OTIS provides four modes of operation, with each mode providing successively stronger optimization capability. The most powerful mode uses a mathematical method called implicit integration to solve what engineers and mathematicians call the optimal control problem. OTIS 3.2, which was developed at the NASA Glenn Research Center, is the latest release of this industry workhorse and features new capabilities for parameter optimization and mission design. OTIS stands for Optimal Control by Implicit Simulation, and it is implicit integration that makes OTIS so powerful at solving trajectory optimization problems. Why is this so important? The optimization process not only determines how to get from point A to point B, but it can also determine how to do this with the least amount of propellant, with the lightest starting weight, or in the fastest time possible while avoiding certain obstacles along the way. There are numerous conditions that engineers can use to define optimal, or best. OTIS provides a framework for defining the starting and ending points of the trajectory (point A and point B), the constraints on the trajectory (requirements like "avoid these regions where obstacles occur"), and what is being optimized (e.g., minimize propellant). The implicit integration method can find solutions to very complicated problems when there is not a lot of information available about what the optimal trajectory might be. The method was first developed for solving two-point boundary value problems and was adapted for use in OTIS. Implicit integration usually allows OTIS to find solutions to problems much faster than programs that use explicit integration and parametric methods. Consequently, OTIS is best suited to solving very complicated and highly constrained problems

An Integrated Approach to Modeling Solar Electric Propulsion Vehicles During Long Duration, Near-Earth Orbit Transfers

Recent NASA interest in utilizing solar electronic propulsion (SEP) technology to transfer payloads, e.g. from low-Earth orbit (LEO) to higher energy geostationary-Earth orbit (GEO) or to Earth escape, has necessitated the development of high fidelity SEP vehicle models and simulations. These models and simulations need to be capable of capturing vehicle dynamics and sub-system interactions experienced during the transfer trajectories which are typically accomplished with continuous-burn (potentially interrupted by solar eclipse), long duration "spiral out" maneuvers taking several months or more to complete. This paper presents details of an integrated simulation approach achieved by combining a high fidelity vehicle simulation code with a detailed solar array model. The combined simulation tool gives researchers the functionality to study the integrated effects of various vehicle sub-systems (e.g. vehicle guidance, navigation and control (GN&C), electric propulsion system (EP)) with time varying power production. Results from a simulation model of a vehicle with a 50 kW class SEP system using the integrated tool are presented and compared to the results from another simulation model employing a 50 kW end-of-life (EOL) fixed power level assumption. These models simulate a vehicle under three degree of freedom dynamics (i.e. translational dynamics only) and include the effects of a targeting guidance algorithm (providing a "near optimal" transfer) during a LEO to near Earth escape (C (sub 3) = 2.0 km (sup 2) / sec (sup 2) spiral trajectory. The presented results include the impact of the fully integrated, time-varying solar array model (e.g. cumulative array degradation from traversing the Van Allen belts, impact of solar eclipses on the vehicle and the related temperature responses in the solar arrays due to operating in the Earth's thermal environment, high fidelity array power module, etc.); these are used to assess the impact on vehicle performance (i.e. propellant consumption) and transit times

Comparison of Low-Thrust Control Laws for Application in Planetocentric Space

Recent interest at NASA for the application of solar electric propulsion for the transfer of significant payloads in cislunar space has led to the development of high-fidelity simulations of such missions. With such transfers involving transfer times on the order of months, simulation time can be significant. In the past, the examination of such missions typically began with the use of lower-fidelity trajectory optimization tools such as SEPSPOT to develop and tune guidance laws which delivered optimal or near- optimal trajectories, where optimal is generally defined as minimizing propellant expenditure or time of flight. The transfer of these solutions to a high-fidelity simulation is typically an iterative process whereby the initial solution may nearly, but not precisely, meet mission objectives. Further tuning of the guidance algorithm is typically necessary when accounting for high-fidelity perturbations such as those due to more detailed gravity models, secondary-body effects, solar radiation pressure, etc. While trajectory optimization is a useful method for determining optimal performance metrics, algorithms which deliver nearly optimal performance with minimal tuning are an attractive alternative

Analysis of Near Rectilinear Halo Orbit Insertion with a 40-kW Solar Electric Propulsion System

This paper examines low thrust trajectories for delivery of a 40-kW solar electric propulsion spacecraft and potential additional payload to a desired NRHO. One option considered is a trans-lunar injection launch as a co-manifested payload on the Space Launch System. For this option, a reference trajectory is designed and a scan of launch dates is completed to understand the propellant mass sensitivity. A 15-day period cyclical variation in required propellant is observed that is attributed to solar gravity effects. A second option considered is to launch on a smaller commercial launch vehicle to a less energetic elliptical orbit and use SEP to spiral out to NRHO. For this option, analysis is completed to understand the trades between delivered mass to NRHO, total propellant required, time of flight, and solar array degradation. Results show that, while launching to lower altitudes can deliver greater payload mass to NRHO, significant solar array degradation can be observed

Mars Surface Mobility Leading to Sustainable Exploration

A Mars rocket-propelled hopper concept was evaluated for feasibility through analysis and experiments. The approach set forth in this paper is to combine the use of in-situ resources in a new Mars mobility concept that will greatly enhance the science return while providing the first opportunity towards reducing the risk of incorporating ISRU into the critical path for the highly coveted, but currently unaffordable, sample return mission. Experimental tests were performed on a high-pressure, self-throttling gaseous oxygen/methane propulsion system to simulate a two-burn-with-coast hop profile. Analysis of the trajectory, production plant requirements, and vehicle mass indicates that a small hopper vehicle could hop 2 km every 30 days with an initial mass of less than 60 kg. A larger vehicle can hop 15 km every 30 to 60 days with an initial mass of 300 to 430 kg

Comparison of Solar Electric and Chemical Propulsion Missions

Solar Electric Propulsion (SEP) offers fuel efficiency and mission robustness for spacecraft. The combination of solar power and electric propulsion engines is currently used for missions ranging from geostationary stationkeeping to deep space science because of these benefits. Both solar power and electric propulsion technologies have progressed to the point where higher electric power systems can be considered, making substantial cargo missions and potentially human missions viable. This paper evaluates and compares representative lunar, Mars, and Sun-Earth Langrangian point missions using SEP and chemical propulsion subsystems. The potential benefits and limitations are discussed along with technology gaps that need to be resolved for such missions to become possible. The connection to NASA's human architecture and technology development efforts will be discussed

Trajectory Optimization: OTIS 4

The latest release of the Optimal Trajectories by Implicit Simulation (OTIS4) allows users to simulate and optimize aerospace vehicle trajectories. With OTIS4, one can seamlessly generate optimal trajectories and parametric vehicle designs simultaneously. New features also allow OTIS4 to solve non-aerospace continuous time optimal control problems. The inputs and outputs of OTIS4 have been updated extensively from previous versions. Inputs now make use of objectoriented constructs, including one called a metastring. Metastrings use a greatly improved calculator and common nomenclature to reduce the user s workload. They allow for more flexibility in specifying vehicle physical models, boundary conditions, and path constraints. The OTIS4 calculator supports common mathematical functions, Boolean operations, and conditional statements. This allows users to define their own variables for use as outputs, constraints, or objective functions. The user-defined outputs can directly interface with other programs, such as spreadsheets, plotting packages, and visualization programs. Internally, OTIS4 has more explicit and implicit integration procedures, including high-order collocation methods, the pseudo-spectral method, and several variations of multiple shooting. Users may switch easily between the various methods. Several unique numerical techniques such as automated variable scaling and implicit integration grid refinement, support the integration methods. OTIS4 is also significantly more user friendly than previous versions. The installation process is nearly identical on various platforms, including Microsoft Windows, Apple OS X, and Linux operating systems. Cross-platform scripts also help make the execution of OTIS and post-processing of data easier. OTIS4 is supplied free by NASA and is subject to ITAR (International Traffic in Arms Regulations) restrictions. Users must have a Fortran compiler, and a Python interpreter is highly recommended

Outcome and Predictors for Mortality in Patients with Cardiogenic Shock:A Dutch Nationwide Registry-Based Study of 75,407 Patients with Acute Coronary Syndrome Treated by PCI

It is important to gain more insight into the cardiogenic shock (CS) population, as currently, little is known on how to improve outcomes. Therefore, we assessed clinical outcome in acute coronary syndrome (ACS) patients treated by percutaneous coronary intervention (PCI) with and without CS at admission. Furthermore, the incidence of CS and predictors for mortality in CS patients were evaluated. The Netherlands Heart Registration (NHR) is a nationwide registry on all cardiac interventions. We used NHR data of ACS patients treated with PCI between 2015 and 2019. Among 75,407 ACS patients treated with PCI, 3028 patients (4.1%) were identified with CS, respectively 4.3%, 3.9%, 3.5%, and 4.3% per year. Factors associated with mortality in CS were age (HR 1.02, 95%CI 1.02-1.03), eGFR (HR 0.98, 95%CI 0.98-0.99), diabetes mellitus (DM) (HR 1.25, 95%CI 1.08-1.45), multivessel disease (HR 1.22, 95%CI 1.06-1.39), prior myocardial infarction (MI) (HR 1.24, 95%CI 1.06-1.45), and out-of-hospital cardiac arrest (OHCA) (HR 1.71, 95%CI 1.50-1.94). In conclusion, in this Dutch nationwide registry-based study of ACS patients treated by PCI, the incidence of CS was 4.1% over the 4-year study period. Predictors for mortality in CS were higher age, renal insufficiency, presence of DM, multivessel disease, prior MI, and OHCA

Characteristics, Treatment Strategies and Outcome in Cardiogenic Shock Complicating Acute Myocardial Infarction:A Contemporary Dutch Cohort

Cardiogenic shock (CS) complicating acute myocardial infarction (AMI) is associated with high morbidity and mortality. Our study aimed to gain insights into patient characteristics, outcomes and treatment strategies in CS patients. Patients with CS who underwent percutaneous coronary intervention (PCI) between 2017 and 2021 were identified in a nationwide registry. Data on medical history, laboratory values, angiographic features and outcomes were retrospectively assessed. A total of 2328 patients with a mean age of 66 years and of whom 73% were male, were included. Mortality at 30 days was 39% for the entire cohort. Non-survivors presented with a lower mean blood pressure and increased heart rate, blood lactate and blood glucose levels (p-value for all &lt;0.001). Also, an increased prevalence of diabetes, multivessel coronary artery disease and a prior coronary event were found. Of all patients, 24% received mechanical circulatory support, of which the majority was via intra-aortic balloon pumps (IABPs). Furthermore, 79% of patients were treated with at least one vasoactive agent, and multivessel PCI was performed in 28%. In conclusion, a large set of hemodynamic, biochemical and patient-related characteristics was identified to be associated with mortality. Interestingly, multivessel PCI and IABPs were frequently applied despite a lack of evidence.</p

Outcome and predictors for mortality in patients with cardiogenic shock: a Dutch nationwide registry-based study of 75,407 patients with acute coronary syndrome treated by PCI

It is important to gain more insight into the cardiogenic shock (CS) population, as currently, little is known on how to improve outcomes. Therefore, we assessed clinical outcome in acute coronary syndrome (ACS) patients treated by percutaneous coronary intervention (PCI) with and without CS at admission. Furthermore, the incidence of CS and predictors for mortality in CS patients were evaluated. The Netherlands Heart Registration (NHR) is a nationwide registry on all cardiac interventions. We used NHR data of ACS patients treated with PCI between 2015 and 2019. Among 75,407 ACS patients treated with PCI, 3028 patients (4.1%) were identified with CS, respectively 4.3%, 3.9%, 3.5%, and 4.3% per year. Factors associated with mortality in CS were age (HR 1.02, 95%CI 1.02-1.03), eGFR (HR 0.98, 95%CI 0.98-0.99), diabetes mellitus (DM) (HR 1.25, 95%CI 1.08-1.45), multivessel disease (HR 1.22, 95%CI 1.06-1.39), prior myocardial infarction (MI) (HR 1.24, 95%CI 1.06-1.45), and out-of-hospital cardiac arrest (OHCA) (HR 1.71, 95%CI 1.50-1.94). In conclusion, in this Dutch nationwide registry-based study of ACS patients treated by PCI, the incidence of CS was 4.1% over the 4-year study period. Predictors for mortality in CS were higher age, renal insufficiency, presence of DM, multivessel disease, prior MI, and OHCA.Cardiolog