553 research outputs found
Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications
Electrospray deposition and direct patterning of polylactic acid nanofibrous microcapsules for tissue engineering
Electrospun nanofibers composed of biodegradable polymers are attractive candidates for cell culture scaffolds in tissue engineering. Their fine-meshed structures, resembling natural extracellular matrices, effectively interact with cell surfaces and promote cell proliferation. The application of electrospinning, however, is limited to two-dimensional (2D) or single tube-like scaffolds, and the fabrication of arbitrary three-dimensional (3D) scaffolds from electrospun nanofibers is still very difficult due to the fibers’ continuous and entangled form. To address this issue, in this paper, we describe the use of phase-separation-assisted electrospray and electrostatic focusing to perform continuous direct 3D patterning of nanofibrous microcapsules of biodegradable polylactic acid (PLA). These microcapsules exhibit fiber-particle duality because they are composed of nanofibers suitable for cell attachment while also being easy to handle as particles for direct 3D patterning. By varying the flow rate of the polymer solution and the humidity of the electrospray atmosphere during electrospraying, the diameter of the microcapsule and its surface porosity can be controlled. The utility of the direct-patterning process is demonstrated by fabricating high-aspect-ratio microscaffolds and subsequent cell cultures. The nanofibrous and hollow structure of the microcapsules combined with the direct 3D patterning process offers a new approach for fabricating tailor-made scaffolds for regenerative medicine
Dispersion and release of embelin from electrospun biodegradable, polymeric, membranes
In this work, microfiber meshes containing embelin, a poorly water-soluble bioactive agent, were prepared by solubilizing embelin in a biodegradable and biocompatible polymer matrix of poly(ε-caprolactone) (PCL). Plain or drug-loaded, highly porous, fibrous membranes with a high area-to-volume ratio were obtained by electrospinning. Non-woven microfibrous meshes were formed by uniform bead-free fibers with a mean diameter of 1.2 μm. Non-porous films were obtained by solution casting, and were used for comparison. The drug-loading content of the prepared systems was appropriate for topical applications. The thermal properties revealed that the crystallinity of embelin significantly decreased, the drug having almost completely dissolved in the PCL fibers. The in situ bioavailability of embelin, an antimycotic agent, is an important aspect to consider in topical drug applications. The drug-loaded systems presented different contact areas with the biological environment. When comparing the ability to expose embelin with the biological environment of the prepared systems, drug-loaded fibrous scaffolds showed a higher bioavailability of the bioactive agent because of an increase by 86% in the area-to-volume ratio, providing an effective area per unit mass that was 5.8-fold higher than that of the film. For the meshes, 90% embelin release was observed after 12h of exposure to phosphate-buffered saline, whereas for the films a comparable level of release occurred only after 72h.Fil: Cortez Tornello, Pablo Roberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Feresin, Gabriela Egly. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Tapia, Alejandro. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Veiga, Itiara G.. Universidade Estadual de Campinas; BrasilFil: Moraes, Ângela M.. Universidade Estadual de Campinas; BrasilFil: Abraham, Gustavo Abel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Cuadrado, Teresita Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin
Search for a Technicolor omega_T Particle in Events with a Photon and a b-quark Jet at CDF
If the Technicolor omega_T particle exists, a likely decay mode is omega_T ->
gamma pi_T, followed by pi_T -> bb-bar, yielding the signature gamma bb-bar. We
have searched 85 pb^-1 of data collected by the CDF experiment at the Fermilab
Tevatron for events with a photon and two jets, where one of the jets must
contain a secondary vertex implying the presence of a b quark. We find no
excess of events above standard model expectations. We express the result of an
exclusion region in the M_omega_T - M_pi_T mass plane.Comment: 14 pages, 2 figures. Available from the CDF server (PS with figs):
http://www-cdf.fnal.gov/physics/pub98/cdf4674_omega_t_prl_4.ps
FERMILAB-PUB-98/321-
Measurement of the B0 anti-B0 oscillation frequency using l- D*+ pairs and lepton flavor tags
The oscillation frequency Delta-md of B0 anti-B0 mixing is measured using the
partially reconstructed semileptonic decay anti-B0 -> l- nubar D*+ X. The data
sample was collected with the CDF detector at the Fermilab Tevatron collider
during 1992 - 1995 by triggering on the existence of two lepton candidates in
an event, and corresponds to about 110 pb-1 of pbar p collisions at sqrt(s) =
1.8 TeV. We estimate the proper decay time of the anti-B0 meson from the
measured decay length and reconstructed momentum of the l- D*+ system. The
charge of the lepton in the final state identifies the flavor of the anti-B0
meson at its decay. The second lepton in the event is used to infer the flavor
of the anti-B0 meson at production. We measure the oscillation frequency to be
Delta-md = 0.516 +/- 0.099 +0.029 -0.035 ps-1, where the first uncertainty is
statistical and the second is systematic.Comment: 30 pages, 7 figures. Submitted to Physical Review
Search for New Particles Decaying to top-antitop in proton-antiproton collisions at squareroot(s)=1.8 TeV
We use 106 \ipb of data collected with the Collider Detector at Fermilab to
search for narrow-width, vector particles decaying to a top and an anti-top
quark. Model independent upper limits on the cross section for narrow, vector
resonances decaying to \ttbar are presented. At the 95% confidence level, we
exclude the existence of a leptophobic \zpr boson in a model of
topcolor-assisted technicolor with mass M_{\zpr} 480 \gev for natural
width = 0.012 M_{\zpr}, and M_{\zpr} 780 \gev for =
0.04 M_{\zpr}.Comment: The CDF Collaboration, submitted to PRL 25-Feb-200
Double Diffraction Dissociation at the Fermilab Tevatron Collider
We present results from a measurement of double diffraction dissociation in
collisions at the Fermilab Tevatron collider. The production cross
section for events with a central pseudorapidity gap of width
(overlapping ) is found to be [] at [630]
GeV. Our results are compared with previous measurements and with predictions
based on Regge theory and factorization.Comment: 10 pages, 4 figures, using RevTeX. Submitted to Physical Review
Letter
A Measurement of the Differential Dijet Mass Cross Section in p-pbar Collisions at sqrt{s}=1.8 TeV
We present a measurement of the cross section for production of two or more
jets as a function of dijet mass, based on an integrated luminosity of 86 pb^-1
collected with the Collider Detector at Fermilab. Our dijet mass spectrum is
described within errors by next-to-leading order QCD predictions using CTEQ4HJ
parton distributions, and is in good agreement with a similar measurement from
the D0 experiment.Comment: 18 pages including 2 figures and 3 tables. Submitted to Phys. Rev. D
Rapid Communication
Search for Gluinos and Scalar Quarks in Collisions at TeV using the Missing Energy plus Multijets Signature
We have performed a search for gluinos (\gls) and squarks (\sq) in a data
sample of 84 pb of \ppb collisions at = 1.8 TeV, recorded by
the Collider Detector at Fermilab, by investigating the final state of large
missing transverse energy and 3 or more jets, a characteristic signature in
R-parity-conserving supersymmetric models. The analysis has been performed
`blind', in that the inspection of the signal region is made only after the
predictions from Standard Model backgrounds have been calculated. Comparing the
data with predictions of constrained supersymmetric models, we exclude gluino
masses below 195 \gev (95% C.L.), independent of the squark mass. For the case
\msq \approx \mgls, gluino masses below 300 \gev are excluded.Comment: 7 pages, 3 figure
Search for Kaluza-Klein Graviton Emission in Collisions at TeV using the Missing Energy Signature
We report on a search for direct Kaluza-Klein graviton production in a data
sample of 84 of \ppb collisions at = 1.8 TeV, recorded
by the Collider Detector at Fermilab. We investigate the final state of large
missing transverse energy and one or two high energy jets. We compare the data
with the predictions from a -dimensional Kaluza-Klein scenario in which
gravity becomes strong at the TeV scale. At 95% confidence level (C.L.) for
=2, 4, and 6 we exclude an effective Planck scale below 1.0, 0.77, and 0.71
TeV, respectively.Comment: Submitted to PRL, 7 pages 4 figures/Revision includes 5 figure
- …