1,260 research outputs found
A planar quasi-optical SIS receiver for array applications
A planar, quasi-optical SIS receiver operating at 230 GHz is described. The receiver consists of a 2 x 5 array of half wave dipole antennas with ten niobium-aluminum oxide-niobium SIS junctions on a quartz dielectric-filled parabola. The 1.4 GHz intermediate frequency is coupled from the mixer via coplanar strip transmission lines and 4:1 balun transformers. The receiver is operated at 4.2 K in a liquid helium immersion cryostat. We report accurate measurements of the performance of single receiver elements. A mixer noise temperature of 89 K DSB, receiver noise temperature of 156 K DSB, and conversion loss of 3 dB into a matched load have been obtained
Absolute magnitudes for late-type dwarf stars for Sloan photometry
We present a new formula for absolute magnitude determination for late-type
dwarf stars as a function of (g-r) and (r-i) for Sloan photometry. The absolute
magnitudes estimated by this approach are brighter than those estimated by
colour-magnitude diagrams, and they reduce the luminosity function rather close
to the luminosity function of Hipparcos.Comment: 11 pages, 9 figures and 5 tables, accepted for publication in A
Embedding dimension gaps in sparse codes
We study the open and closed embedding dimensions of a convex 3-sparse code
, which records the intersection pattern of lines in the Fano
plane. We show that the closed embedding dimension of is three,
and the open embedding dimension is between four and six, providing the first
example of a 3-sparse code with closed embedding dimension three and differing
open and closed embedding dimensions. We also investigate codes whose canonical
form is quadratic, i.e. ``degree two" codes. We show that such codes are
realizable by axis-parallel boxes, generalizing a recent result of Zhou on
inductively pierced codes.
We pose several open questions regarding sparse and low-degree codes. In
particular, we conjecture that the open embedding dimension of certain 3-sparse
codes derived from Steiner triple systems grows to infinity.Comment: 16 pages, 8 figure
The PARSE Programming Paradigm. Part I: Software Development Methodology. Part II: Software Development Support Tools
The programming methodology of PARSE (parallel software environment), a software environment being developed for reconfigurable non-shared memory parallel computers, is described. This environment will consist of an integrated collection of language interfaces, automatic and semi-automatic debugging and analysis tools, and operating system —all of which are made more flexible by the use of a knowledge-based implementation for the tools that make up PARSE. The programming paradigm supports the user freely choosing among three basic approaches /abstractions for programming a parallel machine: logic-based descriptive, sequential-control procedural, and parallel-control procedural programming. All of these result in efficient parallel execution. The current work discusses the methodology underlying PARSE, whereas the companion paper, “The PARSE Programming Paradigm — II: Software Development Support Tools,” details each of the component tools
Model for an Intelligent Operating System for Executing Tasks on a Reconfigurable Parallel Architecture
Parallel processing is one approach to achieve the large computational processing capabilities required by many real-time computing tasks. One of the problems that must be addressed in the use of reconfigurable multiprocessor systems is matching the architecture configuration to the algorithms to be executed. This paper presents a conceptual model that explores the potential of artificial intelligence tools, specifically expert systems, to design an Intelligent Operating System for multiprocessor systems. The target task is the implementation of image understanding systems on multiprocessor architectures. PASM is used as an example multiprocessor. The Intelligent Operating System concepts developed here could also be used to address other problems requiring real-time processing. An example image understanding task is presented to illustrate the concept of intelligent scheduling by the Intelligent Operating System. Also considered is the use of the conceptual model when developing an image understanding system in order to test different strategies for choosing algorithms, imposing execution order constraints, and integrating results from various algorithms
The cryomechanical design of MUSIC: a novel imaging instrument for millimeter-wave astrophysics at the Caltech Submillimeter Observatory
MUSIC (Multicolor Submillimeter kinetic Inductance Camera) is a new facility instrument for the Caltech Submillimeter Observatory (Mauna Kea, Hawaii) developed as a collaborative effect of Caltech, JPL, the University of Colorado at Boulder and UC Santa Barbara, and is due for initial commissioning in early 2011. MUSIC utilizes a new class of superconducting photon detectors known as microwave kinetic inductance detectors (MKIDs), an emergent technology that offers considerable advantages over current types of detectors for submillimeter and millimeter direct detection. MUSIC will operate a focal plane of 576 spatial pixels, where each pixel is a slot line antenna coupled to multiple detectors through on-chip, lumped-element filters, allowing simultaneously imaging in four bands at 0.86, 1.02, 1.33 and 2.00 mm. The MUSIC instrument is designed for closed-cycle operation, combining a pulse tube cooler with a two-stage Helium-3 adsorption refrigerator, providing a focal plane temperature of 0.25 K with intermediate temperature stages at approximately 50, 4 and 0.4 K for buffering heat loads and heat sinking of optical filters. Detector readout is achieved using semi-rigid coaxial cables from room temperature to the focal plane, with cryogenic HEMT amplifiers operating at 4 K. Several hundred detectors may be multiplexed in frequency space through one signal line and amplifier. This paper discusses the design of the instrument cryogenic hardware, including a number of features unique to the implementation of superconducting detectors. Predicted performance data for the instrument system will also be presented and discussed
Towards Field Theory Amplitudes From the Cohomology of Pure Spinor Superspace
A simple BRST-closed expression for the color-ordered super-Yang-Mills
5-point amplitude at tree-level is proposed in pure spinor superspace and shown
to be BRST-equivalent to the field theory limit of the open superstring 5-pt
amplitude. It is manifestly cyclic invariant and each one of its five terms can
be associated to the five Feynman diagrams which use only cubic vertices. Its
form also suggests an empirical method to find superspace expressions in the
cohomology of the pure spinor BRST operator for higher-point amplitudes based
on their kinematic pole structure. Using this method, Ansaetze for the 6- and
7-point 10D super-Yang-Mills amplitudes which map to their 14 and 42
color-ordered diagrams are conjectured and their 6- and 7-gluon expansions are
explicitly computed.Comment: 14 pages, harvmac, v4: trivial edits in the text to comply with JHEP
refere
Recommended from our members
A Review of Previous Research in Direct Energy Conversion Fission Reactors
From the earliest days of power reactor development, direct energy conversion was an obvious choice to produce high efficiency electric power generation. Directly capturing the energy of the fission fragments produced during nuclear fission avoids the intermediate conversion to thermal energy and the efficiency limitations of classical thermodynamics. Efficiencies of more than 80% are possible, independent of operational temperature. Direct energy conversion fission reactors would possess a number of unique characteristics that would make them very attractive for commercial power generation. These reactors would be modular in design with integral power conversion and operate at low pressures and temperatures. They would operate at high efficiency and produce power well suited for long distance transmission. They would feature large safety margins and passively safe design. Ideally suited to production by advanced manufacturing techniques, direct energy conversion fission reactors could be produced more economically than conventional reactor designs. The history of direct energy conversion can be considered as dating back to 1913 when Moseleyl demonstrated that charged particle emission could be used to buildup a voltage. Soon after the successful operation of a nuclear reactor, E.P. Wigner suggested the use of fission fragments for direct energy conversion. Over a decade after Wigner's suggestion, the first theoretical treatment of the conversion of fission fragment kinetic energy into electrical potential appeared in the literature. Over the ten years that followed, a number of researchers investigated various aspects of fission fragment direct energy conversion. Experiments were performed that validated the basic physics of the concept, but a variety of technical challenges limited the efficiencies that were achieved. Most research in direct energy conversion ceased in the US by the late 1960s. Sporadic interest in the concept appears in the literature until this day, but there have been no recent significant programs to develop the technology
- …