1,745 research outputs found
Localized fluidization in granular materials: Theoretical and numerical study
We present analytical and numerical results on localized fluidization within
a granular layer subjected to a local injection of fluid. As the injection rate
increases the three different regimes previously reported in the literature are
recovered: homogeneous expansion of the bed, fluidized cavity in which
fluidization starts developing above the injection area, and finally the
chimney of fluidized grains when the fluidization zone reaches the free
surface. The analytical approach is at the continuum scale, based on Darcy's
law and Therzaghi's effective stress principle. It provides a good description
of the phenomenon as long as the porosity of the granular assembly remains
relatively homogeneous, i.e. for small injection rates. The numerical approach
is at the particle scale based on the coupled DEM-PFV method. It tackles the
more heterogeneous situations which occur at larger injection rates. The
results from both methods are in qualitative agreement with data published
independently. A more quantitative agreement is achieved by the numerical
model. A direct link is evidenced between the occurrence of the different
regimes of fluidization and the injection aperture. While narrow apertures let
the three different regimes be distinguished clearly, larger apertures tend to
produce a single homogeneous fluidization regime. In the former case, it is
found that the transition between the cavity regime and the chimney regime for
an increasing injection rate coincides with a peak in the evolution of inlet
pressure. Finally, the occurrence of the different regimes is defined in terms
of the normalized flux and aperture
A conserved BDNF, glutamate- and GABA-enriched gene module related to human depression identified by coexpression meta-analysis and DNA variant genome-wide association studies
Large scale gene expression (transcriptome) analysis and genome-wide association studies (GWAS) for single nucleotide polymorphisms have generated a considerable amount of gene- and disease-related information, but heterogeneity and various sources of noise have limited the discovery of disease mechanisms. As systematic dataset integration is becoming essential, we developed methods and performed meta-clustering of gene coexpression links in 11 transcriptome studies from postmortem brains of human subjects with major depressive disorder (MDD) and non-psychiatric control subjects. We next sought enrichment in the top 50 meta-analyzed coexpression modules for genes otherwise identified by GWAS for various sets of disorders. One coexpression module of 88 genes was consistently and significantly associated with GWAS for MDD, other neuropsychiatric disorders and brain functions, and for medical illnesses with elevated clinical risk of depression, but not for other diseases. In support of the superior discriminative power of this novel approach, we observed no significant enrichment for GWAS-related genes in coexpression modules extracted from single studies or in meta-modules using gene expression data from non-psychiatric control subjects. Genes in the identified module encode proteins implicated in neuronal signaling and structure, including glutamate metabotropic receptors (GRM1, GRM7), GABA receptors (GABRA2, GABRA4), and neurotrophic and development-related proteins [BDNF, reelin (RELN), Ephrin receptors (EPHA3, EPHA5)]. These results are consistent with the current understanding of molecular mechanisms of MDD and provide a set of putative interacting molecular partners, potentially reflecting components of a functional module across cells and biological pathways that are synchronously recruited in MDD, other brain disorders and MDD-related illnesses. Collectively, this study demonstrates the importance of integrating transcriptome data, gene coexpression modules and GWAS results for providing novel and complementary approaches to investigate the molecular pathology of MDD and other complex brain disorders. © 2014 Chang et al
ISOCAM observations of the rho Ophiuchi cloud: Luminosity and mass functions of the pre-main sequence embedded cluster
We present the results of the first extensive mid-infrared (IR) imaging
survey of the rho Ophiuchi embedded cluster, performed with the ISOCAM camera
on board the ISO satellite. The main molecular cloud L1688, as well as L1689N
and L1689S, have been completely surveyed for point sources at 6.7 and 14.3
micron. A total of 425 sources are detected including 16 Class I, 123 Class II,
and 77 Class III young stellar objects (YSOs). Essentially all of the mid-IR
sources coincide with near-IR sources, but a large proportion of them are
recognized for the first time as YSOs. Our dual-wavelength survey allows us to
identify essentially all the YSOs with IR excess in the embedded cluster down
to Fnu ~ 10 - 15 mJy. It more than doubles the known population of Class II
YSOs and represents the most complete census to date of newly formed stars in
the rho Ophiuchi central region. The stellar luminosity function of the
complete sample of Class II YSOs is derived with a good accuracy down to L=
0.03 Lsun. A modeling of this lumino- sity function, using available pre-main
sequence tracks and plausible star for- mation histories, allows us to derive
the mass distribution of the Class II YSOs which arguably reflects the IMF of
the embedded cluster. We estimate that the IMF in rho Ophiuchi is well
described by a two-component power law with a low- mass index of -0.35+/-0.25,
a high-mass index of -1.7 (to be compared with the Salpeter value of -1.35),
and a break occurring at M = 0.55+/-0.25 Msun. This IMF is flat with no
evidence for a low-mass cutoff down to at least 0.06 Msun.Comment: A&A Document Class -- version 5.01, 27 pages, 10 figures v2: typos
added including few changes in source numberin
Extraterrestrial Regolith Derived Atmospheric Entry Heat Shields
High-mass planetary surface access is one of NASAs technical challenges involving entry, descent and landing (EDL). During the entry and descent phase, frictional interaction with the planetary atmosphere causes a heat build-up to occur on the spacecraft, which will rapidly destroy it if a heat shield is not used. However, the heat shield incurs a mass penalty because it must be launched from Earth with the spacecraft, thus consuming a lot of precious propellant. This NASA Innovative Advanced Concept (NIAC) project investigated an approach to provide heat shield protection to spacecraft after launch and prior to each EDL thus potentially realizing significant launch mass savings. Heat shields fabricated in situ can provide a thermal-protection system for spacecraft that routinely enter a planetary atmosphere. By fabricating the heat shield with space resources from materials available on moons and asteroids, it is possible to avoid launching the heat-shield mass from Earth. Regolith has extremely good insulating properties and the silicates it contains can be used in the fabrication and molding of thermal-protection materials. In this paper, we will describe three types of in situ fabrication methods for heat shields and the testing performed to determine feasibility of this approach
Crystal structure and phonon softening in Ca3Ir4Sn13
We investigated the crystal structure and lattice excitations of the ternary
intermetallic stannide Ca3Ir4Sn13 using neutron and x-ray scattering
techniques. For T > T* ~ 38 K the x-ray diffraction data can be satisfactorily
refined using the space group Pm-3n. Below T* the crystal structure is
modulated with a propagation vector of q = (1/2, 1/2, 0). This may arise from a
merohedral twinning in which three tetragonal domains overlap to mimic a higher
symmetry, or from a doubling of the cubic unit cell. Neutron diffraction and
neutron spectroscopy results show that the structural transition at T* is of a
second-order, and that it is well described by mean-field theory. Inelastic
neutron scattering data point towards a displacive structural transition at T*
arising from the softening of a low-energy phonon mode with an energy gap of
Delta(120 K) = 1.05 meV. Using density functional theory the soft phonon mode
is identified as a 'breathing' mode of the Sn12 icosahedra and is consistent
with the thermal ellipsoids of the Sn2 atoms found by single crystal
diffraction data
Numerical modeling of particle migration in granular soils
Suffusion is the process of internal erosion where fine particles migrate under water seepage through a coarser soil matrix. Relevant models of suffusive phenomena must reproduce the poromechanical effects that result from the two-way coupling between the deformation of the solid matrix, the fluid pressure and the flow. In this work, an advanced computational method is used to study the particle migration in granular soils. The so called coupled Discrete Element Method - Pore scale Finite Volume (DEM-PFV) is based on a microscopic hydromechanical approach. It couples the discrete element method that solves the equations of motion for the solid fraction, with a PFV method that solves the fluid flow equations. We use this method to study particle transport through coarser granular assemblies that do not evolve with time. These simulations allow us to obtain, for different cases, the parameters to include in a general advection-dispersion equation (ADE). We paid particular attention to the role played by the intermittent formation of blockages of transported particles in the constrictions of the granular assembly. These temporary and collective trapping events change local fluid flows and affect the particle transport on short time or length scales. As the transport time between consecutive blockages and the duration of blockages have exponential decays, sink and source terms can be added to the ADE
ISOCAM observations of the L1551 star formation region
The results of a deep mid-IR ISOCAM survey of the L1551 dark molecular cloud
are presented. The aim of this survey is a search for new YSO (Young Stellar
Object) candidates, using two broad-band filters centred at 6.7 and 14.3
micron. Although two regions close to the centre of L1551 had to be avoided due
to saturation problems, 96 sources were detected in total (76 sources at 6.7
micron and 44 sources at 14.3 micron). Using the 24 sources detected in both
filters, 14 were found to have intrinsic mid-IR excess at 14.3 micron and were
therefore classified as YSO candidates. Using additional observations in B, V,
I, J, H and K obtained from the ground, most candidates detected at these
wavelengths were confirmed to have mid-IR excess at 6.7 micron as well, and
three additional YSO candidates were found. Prior to this survey only three
YSOs were known in the observed region (avoiding L1551 IRS5/NE and HL/XZ Tau).
This survey reveals 15 new YSO candidates, although several of these are
uncertain due to their extended nature either in the mid-IR or in the
optical/near-IR observations. Two of the sources with mid-IR excess are
previously known YSOs, one is a brown dwarf MHO 5 and the other is the well
known T Tauri star HH30, consisting of an outflow and an optically thick disk
seen edge on.Comment: 14 Pages, 8 Figure
Meta-analysis methods for combining multiple expression profiles: Comparisons, statistical characterization and an application guideline
Background: As high-throughput genomic technologies become accurate and affordable, an increasing number of data sets have been accumulated in the public domain and genomic information integration and meta-analysis have become routine in biomedical research. In this paper, we focus on microarray meta-analysis, where multiple microarray studies with relevant biological hypotheses are combined in order to improve candidate marker detection. Many methods have been developed and applied in the literature, but their performance and properties have only been minimally investigated. There is currently no clear conclusion or guideline as to the proper choice of a meta-analysis method given an application; the decision essentially requires both statistical and biological considerations.Results: We performed 12 microarray meta-analysis methods for combining multiple simulated expression profiles, and such methods can be categorized for different hypothesis setting purposes: (1) HSA: DE genes with non-zero effect sizes in all studies, (2) HSB: DE genes with non-zero effect sizes in one or more studies and (3) HSr: DE gene with non-zero effect in "majority"of studies. We then performed a comprehensive comparative analysis through six large-scale real applications using four quantitative statistical evaluation criteria: detection capability, biological association, stability and robustness. We elucidated hypothesis settings behind the methods and further apply multi-dimensional scaling (MDS) and an entropy measure to characterize the meta-analysis methods and data structure, respectively.Conclusions: The aggregated results from the simulation study categorized the 12 methods into three hypothesis settings (HSA, HSB, and HSr). Evaluation in real data and results from MDS and entropy analyses provided an insightful and practical guideline to the choice of the most suitable method in a given application. All source files for simulation and real data are available on the author's publication website. © 2013 Chang et al.; licensee BioMed Central Ltd
Generalized drift-diffusion model for miniband superlattices
A drift-diffusion model of miniband transport in strongly coupled
superlattices is derived from the single-miniband Boltzmann-Poisson transport
equation with a BGK (Bhatnagar-Gross-Krook) collision term. We use a consistent
Chapman-Enskog method to analyze the hyperbolic limit, at which collision and
electric field terms dominate the other terms in the Boltzmann equation. The
reduced equation is of the drift-diffusion type, but it includes additional
terms, and diffusion and drift do not obey the Einstein relation except in the
limit of high temperatures.Comment: 4 pages, 3 figures, double-column revtex. To appear as RC in PR
- …