Investigation of dissimilar metal welds by energy-resolved neutron imaging

A nondestructive study of the internal structure and compositional gradient of dissimilar metal-alloy welds through energy-resolved neutron imaging is described in this paper. The ability of neutrons to penetrate thick metal objects (up to several cm) provides a unique possibility to examine samples which are opaque to other conventional techniques. The presence of Bragg edges in the measured neutron transmission spectra can be used to characterize the internal residual strain within the samples and some microstructural features, e.g. texture within the grains, while neutron resonance absorption provides the possibility to map the degree of uniformity in mixing of the participating alloys and intermetallic formation within the welds. In addition, voids and other defects can be revealed by the variation of neutron attenuation across the samples. This paper demonstrates the potential of neutron energy-resolved imaging to measure all these characteristics simultaneously in a single experiment with sub-mm spatial resolution. Two dissimilar alloy welds are used in this study: Al autogenously laser welded to steel, and Ti gas metal arc welded (GMAW) to stainless steel using Cu as a filler alloy. The cold metal transfer variant of the GMAW process was used in joining the Ti to the stainless steel in order to minimize the heat input. The distributions of the lattice parameter and texture variation in these welds as well as the presence of voids and defects in the melt region are mapped across the welds. The depth of the thermal front in the Al–steel weld is clearly resolved and could be used to optimize the welding process. A highly textured structure is revealed in the Ti to stainless steel joint where copper was used as a filler wire. The limited diffusion of Ti into the weld region is also verified by the resonance absorption

Three Dimensional Polarimetric Neutron Tomography of Magnetic Fields

Through the use of Time-of-Flight Three Dimensional Polarimetric Neutron Tomography (ToF 3DPNT) we have for the first time successfully demonstrated a technique capable of measuring and reconstructing three dimensional magnetic field strengths and directions unobtrusively and non-destructively with the potential to probe the interior of bulk samples which is not amenable otherwise. Using a pioneering polarimetric set-up for ToF neutron instrumentation in combination with a newly developed tailored reconstruction algorithm, the magnetic field generated by a current carrying solenoid has been measured and reconstructed, thereby providing the proof-of-principle of a technique able to reveal hitherto unobtainable information on the magnetic fields in the bulk of materials and devices, due to a high degree of penetration into many materials, including metals, and the sensitivity of neutron polarisation to magnetic fields. The technique puts the potential of the ToF time structure of pulsed neutron sources to full use in order to optimise the recorded information quality and reduce measurement time.Comment: 12 pages, 4 figure

Bragg edge tomography characterization of additively manufactured 316L steel

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consider conventional attenuation tomography of the two samples by integrating the signal for neutron wavelengths beyond the last Bragg edge, to analyze the bulk density properties of the material. This is used to map defects, such as porosities or cracks, which yield a lower density. Second, we obtain strain maps for each of the tomography projections by tracking the wavelength of the strongest Bragg edge corresponding to the {111} lattice plane family. Algebraic reconstruction techniques are used to obtain volumetric 3D maps of the strain in the bulk of the samples. It is found that not only the volume of the sample where the shock peening treatment was carried out yields a higher bulk density, but also a deep and remarkable compressive strain region. Finally, the analysis of the Bragg edge heights as a function of the projection angle is used to describe qualitatively crystallographic texture properties of the samples.Fil: Busi, Matteo. Laboratory for Neutron Scattering and Imaging; SuizaFil: Polatidis, Efthymios. Laboratory for Neutron Scattering and Imaging; SuizaFil: Malamud, Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; ArgentinaFil: Kockelmann, Winfried. No especifíca;Fil: Morgano, Manuel. No especifíca;Fil: Kaestner, Anders. Laboratory for Neutron Scattering and Imaging; SuizaFil: Tremsin, Anton. University of California at Berkeley; Estados UnidosFil: Kalentics, Nikola. Ecole Polytechnique Fédérale de Lausanne; SuizaFil: Logé, Roland. Ecole Polytechnique Fédérale de Lausanne; SuizaFil: Leinenbach, Christian. No especifíca;Fil: Shinohara, Takenao. No especifíca;Fil: Strobl, Markus. Laboratory for Neutron Scattering and Imaging; Suiz

Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures

The physical properties of polycrystalline materials depend on their microstructure, which is the nano-to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF 3DND). Compared to existing analogous X-ray diffraction techniques, ToF 3DND enables studies of samples that can be both larger in size and made of heavier elements. Moreover, ToF 3DND facilitates the use of complicated sample environments. The basic ToF 3DND setup, utilizing an imaging detector with high spatial and temporal resolution, can easily be implemented at a time-of-flight neutron beamline. The technique was developed and tested with data collected at the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Complex (J-PARC) for an iron sample. We successfully reconstructed the shape of 108 grains and developed an indexing procedure. The reconstruction algorithms have been validated by reconstructing two stacked Co-Ni-Ga single crystals, and by comparison with a grain map obtained by post-mortem electron backscatter diffraction (EBSD)