Application of terahertz spectroscopy to the characterization of biological samples using birefringence silicon grating

We present a device and method for performing vector transmission spectroscopy on biological specimens at terahertz (THz) frequencies. The device consists of artificial dielectric birefringence obtained from silicon microfluidic grating structures. The device can measure the complex dielectric function of a liquid, across a wide THz band of 2 to 5.5 THz, using a Fourier transform infrared spectrometer. Measurement data from a range of liquid specimens, including sucrose, salmon deoxyribonucleic acid (DNA), herring DNA, and bovine serum albumin protein solution in water are presented. The specimen handling is simple, using a microfluidic channel. The transmission through the device is improved significantly and thus the measurement accuracy and bandwidth are increase

Terahertz single pixel imaging based on a Nipkow disk

We describe a terahertz single pixel imaging system based on a Nipkow disk. Nipkow disks have been used for fast scanning imaging systems since the first experimental television was invented in 1926. In our work, a Nipkow disk with 24 scanning lines was used to provide an axial resolution of 2 mm/pixel. We also show that by implementing a microscanning technique the axial resolution can be further improved to 0.5 mm/pixel. Imaging of several objects was demonstrated to show that this simple scanning system is promising for fast and/or real time terahertz imaging applications

A terahertz polarization insensitive dual band metamaterial absorber

Metamaterial absorbers have attracted considerable attention for applications in the terahertz range. In this Letter, we report the design, fabrication, and characterization of a terahertz dual band metamaterial absorber that shows two distinct absorption peaks with high absorption. By manipulating the periodic patterned structures as well as the dielectric layer thickness of the metal–dielectric–metal structure, significantly high absorption can be obtained at specific resonance frequencies. Finite-difference time-domain modeling is used to design the structure of the absorber. The fabricated devices have been characterized using a Fourier transform IR spectrometer. The experimental results show two distinct absorption peaks at 2.7 and 5.2 THz, which are in good agreement with the simulation. The absorption magnitudes at 2.7 and 5.2 THz are 0.68 and 0.74, respectively

Feasibility Studies on Deploying a Self-Contained Solar-Hydraulic Pilot Power Plant in a Rural Area in Bangladesh

In October 2017, the World Bank reported that Bangladesh continued to reduce poverty - rural poverty decreased from 35.2 to 26.4 percent between 2010 and 2016, but at a slower pace. It is well-accepted that lack of access to electricity is one of the major impediments to growth and development of the rural economies in developing countries (Khandker et al. 2009). In Bangladesh, only 29% of rural areas were covered by the national grid which took up merely 2.27% of the total energy consumption and almost 94.2% of which came from highly polluting fuelwood and other biomass including leaves, crops and dung (BIDS Survey 2004). The problems rural people face in obtaining safe, clean, and reliable energy supplies represent a significant barrier to rural economic development and social well-being (Barnes et al. 2010). Solar energy is an excellent candidate as it is clean, safe and abundant in Bangladesh. Since early 1990s more than four-million solar home systems (SHS) have been installed in Bangladesh and the number is still increasing. However, batteries, especially lead-acid batteries used as energy storage systems in solar off-grid power plants, are considered highly hazardous to environment due to their chemistry. In an effort to eliminate this hazard a novel design hybridizing solar power with hydro power has been conceptualized. In this design surplus electrical energy generated by the solar plant during daytime is stored as potential energy by pumping water into an overhead tank rather than stored as chemical energy in battery for usage after sunset. A prototype system is being designed to develop the proof of concept where a power plant will be installed in an off-grid area of the Chittagong Hill Tracts in Bangladesh. For this purpose, several villages in Bandarban and Rangamati districts have been surveyed for estimating the load demand of those villages and the affordability of the potential consumers. Based on the survey results, a village has been selected and a prototype solar-hydro hybrid power plant has been designed. A business model has also been proposed. This report presents the survey methodology, data analysis, and the design for the prototype power plant and the proposal business model

A low-noise transimpedance amplifier for BLM-based ion channel recording

High-throughput screening (HTS) using ion channel recording is a powerful drug discovery technique in pharmacology. Ion channel recording with planar bilayer lipid membranes (BLM) is scalable and has very high sensitivity. A HTS system based on BLM ion channel recording faces three main challenges: (i) design of scalable microfluidic devices; (ii) design of compact ultra-low-noise transimpedance amplifiers able to detect currents in the pA range with bandwidth >10 kHz; (iii) design of compact, robust and scalable systems that integrate these two elements. This paper presents a low-noise transimpedance amplifier with integrated A/D conversion realized in CMOS 0.35 µm technology. The CMOS amplifier acquires currents in the range ±200 pA and ±20 nA, with 100 kHz bandwidth while dissipating 41 mW. An integrated digital offset compensation loop balances any voltage offsets from Ag/AgCl electrodes. The measured open-input input-referred noise current is as low as 4 fA/Root Hz at ±200 pA range. The current amplifier is embedded in an integrated platform, together with a microfluidic device, for current recording from ion channels. Gramicidin-A, alpha-haemolysin and KcsA potassium channels have been used to prove both the platform and the current-to-digital converter

A Glucose Sensing System Based on Transmission Measurements at Millimetre Waves using Micro strip Patch Antennas

AbstractWe present a sensing system operating at millimetre (mm) waves in transmission mode that can measure glucose level changes based on the complex permittivity changes across the signal path. The permittivity of a sample can change significantly as the concentration of one of its substances varies: for example, blood permittivity depends on the blood glucose levels. The proposed sensing system uses two facing microstrip patch antennas operating at 60 GHz, which are placed across interrogated samples. The measured transmission coefficient depends on the permittivity change along the signal path, which can be correlated to the change in concentration of a substance. Along with theoretical estimations, we experimentally demonstrate the sensing performance of the system using controlled laboratory samples, such as water-based glucose-loaded liquid samples. We also present results of successful glucose spike detection in humans during an in-vivo Intravenous Glucose Tolerance Test (IVGTT). The system could eventually be developed into a non-invasive glucose monitor for continuous monitoring of glucose levels for people living with diabetes, as it can detect as small as 1.33 mmol/l (0.025 wt%) glucose concentrations in the controlled water-based samples satisfactorily, which is well below the typical human glucose levels of 4 mmol/l.</jats:p

Characterization of the Prokaryotic Sodium Channel NavSp Pore with a Microfluidic Bilayer Platform

This paper describes the use of a newly-developed micro-chip bilayer platform to examine the electrophysiological properties of the prokaryotic voltage-gated sodium channel pore (NavSp) from Silicibacter pomeroyi. The platform allows up to 6 bilayers to be analysed simultaneously. Proteoliposomes were incorporated into suspended lipid bilayers formed within the microfluidic bilayer chips. The chips provide access to bilayers from either side, enabling the fast and controlled titration of compounds. Dose-dependent modulation of the opening probability by the channel blocking drug nifedipine was measured and its IC50 determined

A distributed amplifier system for bilayer lipid membrane (BLM) arrays with noise and individual offset cancellation

Lipid bilayer membrane (BLM) arrays are required for high throughput analysis, for example drug screening or advanced DNA sequencing. Complex microfluidic devices are being developed but these are restricted in terms of array size and structure or have integrated electronic sensing with limited noise performance. We present a compact and scalable multichannel electrophysiology platform based on a hybrid approach that combines integrated state-of-the-art microelectronics with low-cost disposable fluidics providing a platform for high-quality parallel single ion channel recording. Specifically, we have developed a new integrated circuit amplifier based on a novel noise cancellation scheme that eliminates flicker noise derived from devices under test and amplifiers. The system is demonstrated through the simultaneous recording of ion channel activity from eight bilayer membranes. The platform is scalable and could be extended to much larger array sizes, limited only by electronic data decimation and communication capabilities