67 research outputs found
Structure-dependent growth control in nanowire synthesis via on-film formation of nanowires
On-film formation of nanowires, termed OFF-ON, is a novel synthetic approach that produces high-quality, single-crystalline nanowires of interest. This versatile method utilizes stress-induced atomic mass flow along grain boundaries in the polycrystalline film to form nanowires. Consequently, controlling the magnitude of the stress induced in the films and the microstructure of the films is important in OFF-ON. In this study, we investigated various experimental growth parameters such as deposition rate, deposition area, and substrate structure which modulate the microstructure and the magnitude of stress in the films, and thus significantly affect the nanowire density. We found that Bi nanowire growth is favored in thermodynamically unstable films that facilitate atomic mass flow during annealing. A large film area and a large thermal expansion coefficient mismatch between the film and the substrate were found to be critical for inducing large compressive stress in a film, which promotes Bi nanowire growth. The OFF-ON method can be routinely used to grow nanowires from a variety of materials by tuning the material-dependent growth parameters
Tonal signal detection in passive sonar systems using atomic norm minimization
Frequency estimation of a tonal signal in passive sonar systems is crucial to the identification of the marine object. In the conventional techniques, a basis mismatch error caused by the discretization of the frequency domain is unavoidable, resulting in a severe degradation of the object detection quality. To overcome the basis mismatch error, we propose a tonal frequency estimation technique in the continuous frequency domain. Towards this end, we formulate the frequency estimation problem as an atomic norm minimization problem. From the numerical experiments, we show that the proposed technique is effective in identifying the tonal frequency components of marine objects.This work was supported by the Agency for Defense Development (ADD) in Korea under the contract No. UD190005DD
Capric Acid Inhibits NO Production and STAT3 Activation during LPS-Induced Osteoclastogenesis
Capric acid is a second medium-chain fatty acid, and recent studies have shown that fatty acids are associated with bone density and reduce bone turnover. In this study, we investigated the effects of capric acid on lipopolysaccharide (LPS)-induced osteoclastogenesis in RAW264.7 cells. After treatment with capric acid (1 mM), the number of tartrate resistant acid phosphatase (TRAP)-positive cells decreased significantly. Capric acid reduced LPS-induced TRAP expression, an osteoclast differentiation marker, without inhibiting cell viability. LPS strongly upregulated inducible nitric oxide synthase (iNOS) mRNA levels and nitric oxide (NO) production, whereas capric acid inhibited them. Furthermore, capric acid also inhibited monocyte chemoattractant protein-1 (MCP-1) mRNA expression. Subsequently, we investigated various intracellular signaling proteins, including nuclear factor-κB (NF-κB), c-Jun-N-terminal kinase (JNK), extracellular signal regulated kinase 1/2 (ERK1/2), and signal transducer and activator of transcription 1 (STAT1) and STAT3 associated with osteoclastogenesis. Capric acid had no effects on LPS-induced activation of the NF-κB, JNK, ERK1/2, and STAT1 pathways. However, capric acid inhibited LPS-induced phosphorylation of Ser727 in STAT3. Additionally, stattic (a STAT3 inhibitor) inhibited LPS-induced iNOS and MCP-1 gene expression. In conclusion, we demonstrated that capric acid inhibited LPS-induced osteoclastogenesis by suppressing NO production via the STAT3 pathway. These results suggest that capric acid has important therapeutic implications for treating bone diseases associated with excessive osteoclastogenesis
Organic light emitting board for dynamic interactive display
Interactive displays involve the interfacing of a stimuli-responsive sensor with a visual human-readable response. Here, we describe a polymeric electroluminescence-based stimuli-responsive display method that simultaneously detects external stimuli and visualizes the stimulant object. This organic light-emitting board is capable of both sensing and direct visualization of a variety of conductive information. Simultaneous sensing and visualization of the conductive substance is achieved when the conductive object is coupled with the light emissive material layer on application of alternating current. A variety of conductive materials can be detected regardless of their work functions, and thus information written by a conductive pen is clearly visualized, as is a human fingerprint with natural conductivity. Furthermore, we demonstrate that integration of the organic light-emitting board with a fluidic channel readily allows for dynamic monitoring of metallic liquid flow through the channel, which may be suitable for biological detection and imaging applications.
Megahertz-wave-transmitting conducting polymer electrode for device-to-device integration
The ideal combination of high optical transparency and high electrical conductivity, especially at very low frequencies of less than the gigahertz (GHz) order, such as the radiofrequencies at which electronic devices operate (tens of kHz to hundreds of GHz), is fundamental incompatibility, which creates a barrier to the realization of enhanced user interfaces and ‘device-to-device integration.’ Herein, we present a design strategy for preparing a megahertz (MHz)-transparent conductor, based on a plasma frequency controlled by the electrical conductivity, with the ultimate goal of device-to-device integration through electromagnetic wave transmittance. This approach is verified experimentally using a conducting polymer, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), the microstructure of which is manipulated by employing a solution process. The use of a transparent conducting polymer as an electrode enables the fabrication of a fully functional touch-controlled display device and magnetic resonance imaging (MRI)-compatible biomedical monitoring device, which would open up a new paradigm for transparent conductors. © 2019, The Author(s
Sparked Reduced Graphene Oxide for Low-Temperature Sodium Beta Alumina Batteries
Wetting Na metal on the solid electrolyte of a liquid Na battery determines the operating temperature and performance of the battery. At low temperatures below 200 degrees C, liquid Na wets poorly on a solid electrolyte near its melting temperature (T-m = 98 degrees C), limiting its suitability for use in low-temperature batteries used for large-scale energy-storage systems. Herein, we propose the use of sparked reduced graphene oxide (rGO) that can improve the Na wetting in sodium-beta alumina batteries (NBBs), allowing operation at lower temperatures. Experimental and computational studies indicated rGO layers with nanogaps exhibited complete liquid Na wetting regardless of the surface energy between the liquid Na and the graphene oxide, which originated from the capillary force in the gap. Employing sparked rGO significantly enhanced the cell performance at 175 degrees C; the cell retained almost 100% Coulombic efficiency after the initial cycle, which is a substantial improvement over cells without sparked rGO. These results suggest that coating sparked rGO is a promising but simple strategy for the development of low-temperature NBBs. © 2019 American Chemical Society11sciescopu
Low-Dimensional Palladium Nanostructures for Fast and Reliable Hydrogen Gas Detection
Palladium (Pd) has received attention as an ideal hydrogen sensor material due to its properties such as high sensitivity and selectivity to hydrogen gas, fast response, and operability at room temperature. Interestingly, various Pd nanostructures that have been realized by recent developments in nanotechnologies are known to show better performance than bulk Pd. This review highlights the characteristic properties, issues, and their possible solutions of hydrogen sensors based on the low-dimensional Pd nanostructures with more emphasis on Pd thin films and Pd nanowires. The finite size effects, relative strengths and weaknesses of the respective Pd nanostructures are discussed in terms of performance, manufacturability, and practical applicability
Radio frequency cantilever-free scanning probe microscopy
Cantilever-free scanning probe microscopy has enormous potential for high-throughput topography imaging using parallel probe arrays. However, the current imaging mechanism of the cantilever-free tip architecture hardly considers the efficiency of the detection method regarding precision and bandwidth, which could be a bottleneck to expanding the application of this measurement system. In this communication, we present a contact resistance-based cantilever-free imaging system using radio frequency (RF) reflectometry. RF reflectometry measurements provide sensitive detection of the contact resistance with a wide bandwidth, enabling sub-micrometer-scale topography imaging. We demonstrated our imaging system using a carbon black-polydimethylsiloxane composite tip with a custom-built RF reflectometry setup. The proof-of-concept system achieved a resolution of 230 nm and a bandwidth of the detection system of approximately 8.5 MHz, validating the feasibility of the imaging technique for potential high-throughput cantilever-free scanning probe microscopy. © 2023 Author(s).11Nsciescopu
Programmable Resistive-Switch Nanowire Transistor Logic Circuits
Programmable logic arrays (PLA) constitute
a promising architecture
for developing increasingly complex and functional circuits through
nanocomputers from nanoscale building blocks. Here we report a novel
one-dimensional PLA element that incorporates resistive switch gate
structures on a semiconductor nanowire and show that multiple elements
can be integrated to realize functional PLAs. In our PLA element,
the gate coupling to the nanowire transistor can be modulated by the
memory state of the resistive switch to yield programmable active
(transistor) or inactive (resistor) states within a well-defined logic
window. Multiple PLA nanowire elements were integrated and programmed
to yield a working 2-to-4 demultiplexer with long-term retention.
The well-defined, controllable logic window and long-term retention
of our new one-dimensional PLA element provide a promising route for
building increasingly complex circuits with nanoscale building blocks
- …