A Femtosecond Neutron Source

The possibility to use the ultrashort ion bunches produced by circularly polarized laser pulses to drive a source of fusion neutrons with sub-optical cycle duration is discussed. A two-side irradiation of a thin foil deuterated target produces two countermoving ion bunches, whose collision leads to an ultrashort neutron burst. Using particle-in-cell simulations and analytical modeling, it is evaluated that, for intensities of a few $10^{19} W cm^{-2}$, more than $10^3$ neutrons per Joule may be produced within a time shorter than one femtosecond. Another scheme based on a layered deuterium-tritium target is outlined.Comment: 15 pages, 3 figure

Power quality improvements of arc welding power supplies by modified bridgeless SEPIC PFC converter

This paper proposes an efficient bridgeless power factor corrected (PFC) modified single ended primary inductor converter (SEPIC) for arc welding power supplies (AWPS). The overall configuration is composed of two converters: (1) a modified bridgeless SEPIC PFC converter, which is controlled by a PI controller to achieve a high power factor and fast response; and (2) a full bridge buck converter with high-frequency transformer for high-frequency isolation to ensure arc welding stability. The proposed system is simulated under different operating conditions of an AWPS. It is also tested in real time by a hardware-in-the-loop system based on a dSPACE DS1103 control board. The system performances are evaluated based on power quality indices such as power factor, total harmonic distortions of the AC grid current, and voltage regulation. The obtained results show that the proposed controller enhances the weld bead quality by keeping a constant current at the output and a stable arc, meet the international power quality standards and robustness for voltage regulation

Lasing microbottles

Lasing of an optical microbottle resonator at predetermined resonant wavelengths is feasible via spatial engineering of the pump laser beam

The PPCD1 Mouse: Characterization of a Mouse Model for Posterior Polymorphous Corneal Dystrophy and Identification of a Candidate Gene

The PPCD1 mouse, a spontaneous mutant that arose in our mouse colony, is characterized by an enlarged anterior chamber resulting from metaplasia of the corneal endothelium and blockage of the iridocorneal angle by epithelialized corneal endothelial cells. The presence of stratified multilayered corneal endothelial cells with abnormal patterns of cytokeratin expression are remarkably similar to those observed in human posterior polymorphous corneal dystrophy (PPCD) and the sporadic condition, iridocorneal endothelial syndrome. Affected eyes exhibit epithelialized corneal endothelial cells, with inappropriate cytokeratin expression and proliferation over the iridocorneal angle and posterior cornea. We have termed this the “mouse PPCD1” phenotype and mapped the mouse locus for this phenotype, designated “Ppcd1”, to a 6.1 Mbp interval on Chromosome 2, which is syntenic to the human Chromosome 20 PPCD1 interval. Inheritance of the mouse PPCD1 phenotype is autosomal dominant, with complete penetrance on the sensitive DBA/2J background and decreased penetrance on the C57BL/6J background. Comparative genome hybridization has identified a hemizygous 78 Kbp duplication in the mapped interval. The endpoints of the duplication are located in positions that disrupt the genes Csrp2bp and 6330439K17Rik and lead to duplication of the pseudogene LOC100043552. Quantitative reverse transcriptase-PCR indicates that expression levels of Csrp2bp and 6330439K17Rik are decreased in eyes of PPCD1 mice. Based on the observations of decreased gene expression levels, association with ZEB1-related pathways, and the report of corneal opacities in Csrp2bptm1a(KOMP)Wtsi heterozygotes and embryonic lethality in nulls, we postulate that duplication of the 78 Kbp segment leading to haploinsufficiency of Csrp2bp is responsible for the mouse PPCD1 phenotype. Similarly, CSRP2BP haploinsufficiency may lead to human PPCD

Reverse mode Na+/Ca2+ exchange mediated by STIM1 contributes to Ca2+ influx in airway smooth muscle following agonist stimulation

<p>Abstract</p> <p>Background</p> <p>Agonist stimulation of airway smooth muscle (ASM) results in IP₃mediated Ca²⁺release from the sarcoplasmic reticulum followed by the activation of store operated and receptor operated non-selective cation channels. Activation of these non-selective channels also results in a Na⁺influx. This localised increase in Na⁺levels can potentially switch the Na⁺/Ca²⁺exchanger into reverse mode and so result in a further influx of Ca²⁺. The aim of this study was to characterise the expression and physiological function of the Na⁺/Ca²⁺exchanger in cultured human bronchial smooth muscle cells and determine its contribution to agonist induced Ca²⁺influx into these cells.</p> <p>Methods</p> <p>The expression profile of NCX (which encodes the Na⁺/Ca²⁺exchanger) homologues in cultured human bronchial smooth muscle cells was determined by reverse transcriptase PCR. The functional activity of reverse mode NCX was investigated using a combination of whole cell patch clamp, intracellular Ca²⁺measurements and porcine airway contractile analyses. KB-R7943 (an antagonist for reverse mode NCX) and target specific siRNA were utilised as tools to inhibit NCX function.</p> <p>Results</p> <p>NCX1 protein was detected in cultured human bronchial smooth muscle cells (HBSMC) cells and NCX1.3 was the only mRNA transcript variant detected. A combination of intracellular Na⁺loading and addition of extracellular Ca²⁺induced an outwardly rectifying current which was augmented following stimulation with histamine. This outwardly rectifying current was inhibited by 10 μM KB-R7943 (an antagonist of reverse mode NCX1) and was reduced in cells incubated with siRNA against NCX1. Interestingly, this outwardly rectifying current was also inhibited following knockdown of STIM1, suggesting for the first time a link between store operated cation entry and NCX1 activation. In addition, 10 μM KB-R7943 inhibited agonist induced changes in cytosolic Ca²⁺and induced relaxation of porcine peripheral airways.</p> <p>Conclusions</p> <p>Taken together, these data demonstrate a potentially important role for NCX1 in control of Ca²⁺homeostasis and link store depletion via STIM1 directly with NCX activation.</p

Idiopathic Male Infertility Is Strongly Associated with Aberrant Promoter Methylation of Methylenetetrahydrofolate Reductase (MTHFR)

Abnormal germline DNA methylation in males has been proposed as a possible mechanism compromising spermatogenesis of some men currently diagnosed with idiopathic infertility. Previous studies have been focused on imprinted genes with DNA methylation in poor quality human sperms. However, recent but limited data have revealed that sperm methylation abnormalities may involve large numbers of genes or shown that genes that are not imprinted are also affected.Using the methylation-specific polymerase chain reaction and bisulfite sequencing method, we examined methylation patterns of the promoter of methylenetetrahydrofolate reductase (MTHFR) gene (NG_013351: 1538-1719) in sperm DNA obtained from 94 idiopathic infertile men and 54 normal fertile controls. Subjects with idiopathic infertility were further divided into groups of normozoospermia and oligozoospermia. Overall, 45% (41/94) of idiopathic infertile males had MTHFR hypermethylation (both hemimethylation and full methylation), compared with 15% of fertile controls (P<0.05). Subjects with higher methylation level of MTHFR were more likely to have idiopathic male infertility (P-value for trend  = 0.0007). Comparing the two groups of idiopathic infertile subjects with different sperm concentrations, a higher methylation pattern was found in the group with oligozoospermia.Hypermethylation of the promoter of MTHFR gene in sperms is associated with idiopathic male infertility. The functional relevance of hypermathylation of MTHFR to male fertility warrants further investigation

Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size

Significant weight savings in parts can be made through the use of additive manufacture (AM), a process which enables the construction of more complex geometries, such as functionally graded lattices, than can be achieved conventionally. The existing framework describing the mechanical properties of lattices places strong emphasis on one property, the relative density of the repeating cells, but there are other properties to consider if lattices are to be used effectively. In this work, we explore the effects of cell size and number of cells, attempting to construct more complete models for the mechanical performance of lattices. This was achieved by examining the modulus and ultimate tensile strength of latticed tensile specimens with a range of unit cell sizes and fixed relative density. Understanding how these mechanical properties depend upon the lattice design variables is crucial for the development of design tools, such as finite element methods, that deliver the best performance from AM latticed parts. We observed significant reductions in modulus and strength with increasing cell size, and these reductions cannot be explained by increasing strut porosity as has previously been suggested. We obtained power law relationships for the mechanical properties of the latticed specimens as a function of cell size, which are similar in form to the existing laws for the relative density dependence. These can be used to predict the properties of latticed column structures comprised of body-centred-cubic (BCC) cells, and may also be adapted for other part geometries. In addition, we propose a novel way to analyse the tensile modulus data, which considers a relative lattice cell size rather than an absolute size. This may lead to more general models for the mechanical properties of lattice structures, applicable to parts of varying size

Human SOD2 Modification by Dopamine Quinones Affects Enzymatic Activity by Promoting Its Aggregation: Possible Implications for Parkinson’s Disease

Mitochondrial dysfunction and oxidative stress are considered central in dopaminergic neurodegeneration in Parkinson’s disease (PD). Oxidative stress occurs when the endogenous antioxidant systems are overcome by the generation of reactive oxygen species (ROS). A plausible source of oxidative stress, which could account for the selective degeneration of dopaminergic neurons, is the redox chemistry of dopamine (DA) and leads to the formation of ROS and reactive dopamine-quinones (DAQs). Superoxide dismutase 2 (SOD2) is a mitochondrial enzyme that converts superoxide radicals to molecular oxygen and hydrogen peroxide, providing a first line of defense against ROS. We investigated the possible interplay between DA and SOD2 in the pathogenesis of PD using enzymatic essays, site-specific mutagenesis, and optical and high-field-cw-EPR spectroscopies. Using radioactive DA, we demonstrated that SOD2 is a target of DAQs. Exposure to micromolar DAQ concentrations induces a loss of up to 50% of SOD2 enzymatic activity in a dose-dependent manner, which is correlated to the concomitant formation of protein aggregates, while the coordination geometry of the active site appears unaffected by DAQ modifications. Our findings support a model in which DAQ-mediated SOD2 inactivation increases mitochondrial ROS production, suggesting a link between oxidative stress and mitochondrial dysfunction

The Evolution of Compact Binary Star Systems

We review the formation and evolution of compact binary stars consisting of white dwarfs (WDs), neutron stars (NSs), and black holes (BHs). Binary NSs and BHs are thought to be the primary astrophysical sources of gravitational waves (GWs) within the frequency band of ground-based detectors, while compact binaries of WDs are important sources of GWs at lower frequencies to be covered by space interferometers (LISA). Major uncertainties in the current understanding of properties of NSs and BHs most relevant to the GW studies are discussed, including the treatment of the natal kicks which compact stellar remnants acquire during the core collapse of massive stars and the common envelope phase of binary evolution. We discuss the coalescence rates of binary NSs and BHs and prospects for their detections, the formation and evolution of binary WDs and their observational manifestations. Special attention is given to AM CVn-stars -- compact binaries in which the Roche lobe is filled by another WD or a low-mass partially degenerate helium-star, as these stars are thought to be the best LISA verification binary GW sources.Comment: 105 pages, 18 figure

Azimuthal anisotropy and correlations at large transverse momenta in p+pp+p and Au+Au collisions at sNN\sqrt{s_{_{NN}}}= 200 GeV

Results on high transverse momentum charged particle emission with respect to the reaction plane are presented for Au+Au collisions at $\sqrt{s_{_{NN}}}$= 200 GeV. Two- and four-particle correlations results are presented as well as a comparison of azimuthal correlations in Au+Au collisions to those in $p+p$ at the same energy. Elliptic anisotropy, $v_2$, is found to reach its maximum at $p_t \sim 3$ GeV/c, then decrease slowly and remain significant up to $p_t\approx 7$ -- 10 GeV/c. Stronger suppression is found in the back-to-back high-$p_t$ particle correlations for particles emitted out-of-plane compared to those emitted in-plane. The centrality dependence of $v_2$ at intermediate $p_t$ is compared to simple models based on jet quenching.Comment: 4 figures. Published version as PRL 93, 252301 (2004