The Interesting Influence of Nanosprings on the Viscoelasticity of Elastomeric Polymer Materials: Simulation and Experiment

Among all carbon nanostructured materials, helical nanosprings or nanocoils have attracted particular interest as a result of their special mechanical behavior. Here, carbon nanosprings are used to adjust the viscoelasticity and reduce the resulting hysteresis loss (HL) of elastomeric polymer materials. Two types of nanospring‐filled elastomer composites are constructed as follows: system I is obtained by directly blending polymer chains with nanosprings; system II is composed of the self‐assembly of a tri‐block structure such as chain‐nanospring‐chain. Coarse‐grained molecular dynamics simulations show that the incorporation of nanosprings can improve the mechanical strength of the elastomer matrix through nanoreinforcement and considerably decrease the hysteresis loss. This finding is significant for reducing fuel consumption and improving fuel efficiency in the automobile tire industry. Furthermore, it is revealed that the spring constant of nanosprings and the interfacial chemical coupling between chains and nanosprings both play crucial roles in adjusting the viscoelasticity of elastomers. It is inferred that elastomer/carbon nanostructured materials with good flexibility and reversible mechanical response (carbon nanosprings, nanocoils, nanorings, and thin graphene sheets) have both excellent mechanical and low HL properties; this may open a new avenue for fabrication of high performance automobile tires and facilitate the large‐scale industrial application of these materials. Carbon nanosprings are found to have the capability to tune the mechanical and viscoelastic properties of elastomeric polymer materials. It is inferred that elastomer/carbon nanostructured materials with good flexibility and reversible mechanical response (i.e., carbon nanosprings, nanocoils, nanorings, and thin graphene sheets) have both excellent mechanical properties and low hysteresis loss.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/96669/1/adfm_201201438_sm_suppl.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/96669/2/1156_ftp.pd

Highly toughened polylactide with novel sliding graft copolymer by in situ reactive compatibilization, crosslinking and chain extension

YesThe “sliding graft copolymer” (SGC), in which many linear poly-ε-caprolactone (PCL) side chains are bound to cyclodextrin rings of a polyrotaxane (PR), was prepared and employed to toughen brittle polylactide (PLA) with methylene diphenyl diisocyanate (MDI) by reactive blending. The SGC was in situ crosslinked and therefore transformed from a crystallized plastic into a totally amorphous elastomer during reactive blending. Meanwhile, PLA-co-SGC copolymer was formed at interface to greatly improve the compatibility between PLA and SGC, and the chain extension of PLA also occurred, were confirmed by FTIR, GPC, SEM, and TEM. The resulting PLA/SGC/MDI blends displayed super impact toughness, elongation at break and nice biocompatibility. It was inferred from these results the crosslinked SGC (c-SGC) elastomeric particles with sliding crosslinking points performed as stress concentrators and absorbed considerable energy under impact and tension process.This work was supported by the National Natural Science Foundation of China (50933001, 51221002 and 51320105012)

Oxygen-Glucose Deprivation Induced Glial Scar-Like Change in Astrocytes

It has been demonstrated that cerebral ischemia induces astrocyte reactivity, and subsequent glial scar formation inhibits axonal regeneration during the recovery phase. Investigating the mechanism of glial scar formation will facilitate the development of strategies to improve axonal regeneration. However, an in vitro model of ischemia-induced glial scar has not yet been systematically established.In the present study, we at the first time found that oxygen-glucose deprivation (OGD) in vitro can induce rat cortical astrocytes to present characteristics of glial scar. After OGD for 6 h, astrocytes showed a remarkable proliferation following 24 h reperfusion, evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and BrdU immunocytochemistry. Meanwhile, the expression of glial fibrillary acidic protein significantly increased, so did the expression of neurocan, which is a hallmark of the glial scar. In further experiments, neurons were co-cultured with astrocytes, which had been exposed to OGD, and then the immunostaining of class III β-tubulin was carried out to assess the neurite growth. When the co-culture was performed at 48 h reperfusion of astrocytes, the neurite growth was obviously inhibited, and this inhibition could be reversed by chondroitinase ABC, which digests glycosaminoglycan chains on CSPGs, including neurocan. However, the processes of neurons were elongated, when the co-culture was performed immediately after OGD.Our results indicated that after conditioned OGD the astrocytes presented the characteristics of the glial scar, which are also comparable to the astrocytes in acute and chronic phases after cerebral ischemia in vivo. Therefore, the present system may be used as an in vitro model to explore the mechanisms underlying glial scar formation and the treatments to improve axonal regeneration after cerebral ischemia

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Expert Consensus on Microtransplant for Acute Myeloid Leukemia in Elderly Patients -Report From the International Microtransplant Interest Group

Recent studies have shown that microtransplant (MST) could improve outcome of patients with elderly acute myeloid leukemia (EAML). To further standardize the MST therapy and improve outcomes in EAML patients, based on analysis of the literature on MST, especially MST with EAML from January 1st, 2011 to November 30th, 2022, the International Microtransplant Interest Group provides recommendations and considerations for MST in the treatment of EAML. Four major issues related to MST for treating EAML were addressed: therapeutic principle of MST (1), candidates for MST (2), induction chemotherapy regimens (3), and post-remission therapy based on MST (4). Others included donor screening, infusion of donor cells, laboratory examinations, and complications of treatment

Tailoring the Static and Dynamic Mechanical Properties of Tri-Block Copolymers through Molecular Dynamics Simulation

Although the research of the self-assembly of tri-block copolymers has been carried out widely, little attention has been paid to study the mechanical properties and to establish its structure-property relation, which is of utmost significance for its practical applications. Here, we adopt molecular dynamics simulation to study the static and dynamic mechanical properties of the ABA tri-block copolymer, by systematically varying the morphology, the interaction strength between A-A blocks, the temperature, the dynamic shear amplitude and frequency. In our simulation, we set the self-assembled structure formed by A-blocks to be in the glassy state, with the B-blocks in the rubbery state. With the increase of the content of A-blocks, the spherical, cylindrical and lamellar domains are formed, respectively, exhibiting a gradual increase of the stress-strain behavior. During the self-assembly process, the stress-strain curve is as well enhanced. The increase of the interaction strength between A-A blocks improves the stress-strain behavior and reduces the dynamic hysteresis loss. Since the cylindrical domains are randomly dispersed, the stress-strain behavior exhibits the isotropic mechanical property; while for the lamellar domains, the mechanical property seems to be better along the direction perpendicular to than parallel to the lamellar direction. In addition, we observe that with the increase of the dynamic shear amplitude and frequency, the self-assembled domains become broken up, resulting in the decrease of the storage modulus and the increase of the hysteresis loss, which holds the same conclusion for the increase of the temperature. Our work provides some valuable guidance to tune the static and dynamic mechanical properties of ABA tri-block copolymer in the field of various applications

Biostratigraphy and Chemostratigraphy Across the Lower Kellwasser Boundary in Laye Section, Guizhou Province

© 2018 Peking University. In order to study biostratigraphy and chemical stratigraphy during the Lower Kellwasser event, high resolution conodonts research and chemostratigraphic framework were carried out. The data reveals that the inorganic and organic carbon isotope have a significant positive excursion at the bottom of the Laye section. It is considered that the sample LY-8 is consistent with the Lower Kellwasser boundary. The main reason for the change of carbon isotope in this area is the increase of organic carbon burial, which is caused by the increase of marine primary productivity and anoxia environment possibly

Designing the Slide-Ring Polymer Network with both Good Mechanical and Damping Properties via Molecular Dynamics Simulation

Through coarse-grained molecular dynamics simulation, we have successfully designed the chemically cross-linked (fixed junction) and the slide-ring (SR) systems. Firstly, we examine the dynamic properties such as the mean-square displacement, the bond, and the end-to-end autocorrelation functions as a function of the cross-linking density, consistently pointing out that the SR system exhibits much lower mobility compared with the fixed junction one at the same cross-linking density. This is further validated by a relatively higher glass transition temperature for the SR system compared with that of the fixed junction one. Then, we calculated the effect of the cross-linking density on the stretch-recovery behavior for the SR and fixed junction systems. Although the chain orientation of the SR system is higher than that of the fixed-junction system, the tensile stress is smaller than the latter. We infer that much greater chain sliding can occur during the stretch, because the movable ring structure homogeneously sustains the external force of the SR system, which, therefore, leads to much larger permanent set and higher hysteresis during the recovery process compared with the fixed-junction one. Based on the stretch-recovery behavior for various cross-linking densities, we obtain the change of the hysteresis loss, which is larger for the SR system than that of the fixed junction system. Lastly, we note that the relatively bigger compressive stress for the SR system results from the aggregation of the rigid rings compared with the fixed junction system. In general, compared with the traditionally cross-linked system, a deep molecular-level insight into the slide-ring polymer network is offered and thus is believed to provide some guidance to the design and preparation of the slide-ring polymer network with both good mechanical and damping properties