14,505 research outputs found
Plasma cleaning device
High vacuum cleaning of contaminated surfaces such as hydrocarbon containment films can be accomplished by a plasma cleaning device which includes a plasma discharge housing to permit generation of a plasma in an environment having a higher pressure than the surface which is to be cleaned. A ground electrode and a radio frequency electrode partially surround a quartz plasma tube, for the introduction of an ionizable gas. These electrodes ionize the gas and help generate the plasma. This plasma flows through a non-constrictive aperture, through the plasma discharge housing and then on to the contaminated surface
Laboratory demonstration model: Active cleaning technique device
The technique which utilizes exposure to a plasma to remove contaminants from a surface was incorporated into a laboratory model which demonstrates active cleaning by both plasma cleaning and ion sputtering modes of operation. The development phase is reported and includes discussion of the plasma tube configuration, device design, and performance tests. A general description of the active cleaning device is provided which includes information on the main power/plasma discharge sensors, and the power, gas supply, and ion accelerator systems. Development of the active cleaning species at high vacuum conditions is described and results indicate that plasma cleaning occurs in the region of a visible plume which extends from the end of the plasma tube. Recommendations are made for research to determine the plasma cleaning mechanism and the plasma species responsible for the cleaning, as well limitations on the type of contaminants that can be removed
Active cleaning technique for removing contamination from optical surfaces in space
An active cleaning technique for removing contaminants from optical surfaces in space was investigated with emphasis on the feasibility of using plasma exposure as a means of in-situ cleaning. The major work accomplished includes: (1) development of an in-situ reflectometer for use in conjunction with the contaminant film deposition/cleaning facility; (2) completion of Apollo Telescope Mount (ATM) filter treatment experiments to assess the effects of plasma exposure on the UV transmittance; (3) attempts to correlate the atomic oxygen flux with cleaning rate; (4) completion of in-situ butadien contamination/plasma cleaning/UV reflectance measurement experiments; (5) carbon cleaning experiments using various gases; (6) completion of silicone contamination/cleaning experiments; and (7) experiments conducted at low chamber pressures to determine cleaning rate distribution and contamination of surfaces adjacent to those being cleaned
Thermodynamic cost of reversible computing
Since reversible computing requires preservation of all information
throughout the entire computational process, this implies that all errors that
appear as a result of the interaction of the information-carrying system with
uncontrolled degrees of freedom must be corrected. But this can only be done at
the expense of an increase in the entropy of the environment corresponding to
the dissipation, in the form of heat, of the ``noisy'' part of the system's
energy.
This paper gives an expression of that energy in terms of the effective noise
temperature, and analyzes the relationship between the energy dissipation rate
and the rate of computation. Finally, a generalized Clausius principle based on
the concept of effective temperature is presented.Comment: 5 pages; added two paragraphs and fixed a number of typo
A General Information Theoretical Proof for the Second Law of Thermodynamics
We show that the conservation and the non-additivity of the information,
together with the additivity of the entropy make the entropy increase in an
isolated system. The collapse of the entangled quantum state offers an example
of the information non-additivity. Nevertheless, the later is also true in
other fields, in which the interaction information is important. Examples are
classical statistical mechanics, social statistics and financial processes. The
second law of thermodynamics is thus proven in its most general form. It is
exactly true, not only in quantum and classical physics but also in other
processes, in which the information is conservative and non-additive.Comment: 4 page
Configurational entropy of network-forming materials
We present a computationally efficient method to calculate the
configurational entropy of network-forming materials. The method requires only
the atomic coordinates and bonds of a single well-relaxed configuration. This
is in contrast to the multiple simulations that are required for other methods
to determine entropy, such as thermodynamic integration. We use our method to
obtain the configurational entropy of well-relaxed networks of amorphous
silicon and vitreous silica. For these materials we find configurational
entropies of 1.02 kb and 0.97 kb per silicon atom, respectively, with kb the
Boltzmann constant.Comment: 4 pages, 4 figure
The effect of microstructure on the fracture toughness of titanium alloys
The microstructure of the alpha titanium alloy Ti-5Al-2.5Sn and the metastable beta titanium alloy Beta 3 was examined. The material was from normal and extra low interstitial grade plates which were either air-cooled or furnace-cooled from an annealing treatment. Beta 3 was studied in alpha-aged and omega-aged plates which were heat treated to similar strength levels. Tensile and plane strain fracture toughness tests were conducted at room temperature on the alpha-aged material. The microstructure and fracture mechanisms of alloys were studied using optical metallography, electron microscopy, microprobe analyses, and texture pole figures. Future experiments are described
Photoelectrochemical water splitting: silicon photocathodes for hydrogen evolution
The development of low cost, scalable, renewable energy technologies is one of today's most pressing scientific challenges. We report on progress towards the development of a photoelectrochemical water-splitting system that will use sunlight and water as the inputs to produce renewable hydrogen with oxygen as a by-product. This system is based on the design principle of incorporating two separate, photosensitive inorganic semiconductor/liquid junctions to collectively generate the 1.7-1.9 V at open circuit needed to support both the oxidation of H_2O (or OH^-) and the reduction of H^+ (or H_2O). Si microwire arrays are a promising photocathode material because the high aspect-ratio electrode architecture allows for the use of low cost, earth-abundant materials without sacrificing energy-conversion efficiency, due to the orthogonalization of light absorption and charge-carrier collection. Additionally, the high surfacearea design of the rod-based semiconductor array inherently lowers the flux of charge carriers over the rod array surface relative to the projected geometric surface of the photoelectrode, thus lowering the photocurrent density at the solid/liquid junction and thereby relaxing the demands on the activity (and cost) of any electrocatalysts. Arrays of Si microwires grown using the Vapor Liquid Solid (VLS) mechanism have been shown to have desirable electronic light absorption properties. We have demonstrated that these arrays can be coated with earth-abundant metallic catalysts and used for photoelectrochemical production of hydrogen. This development is a step towards the demonstration of a complete artificial photosynthetic system, composed of only inexpensive, earth-abundant materials, that is simultaneously efficient, durable, and scalable
Creation of the selection list for the Experiment Scheduling Program (ESP)
The efforts to develop a procedure to construct selection groups to augment the Experiment Scheduling Program (ESP) are summarized. Included is a User's Guide and a sample scenario to guide in the use of the software system that implements the developed procedures
Information Content of Spontaneous Symmetry Breaking
We propose a measure of order in the context of nonequilibrium field theory
and argue that this measure, which we call relative configurational entropy
(RCE), may be used to quantify the emergence of coherent low-entropy
configurations, such as time-dependent or time-independent topological and
nontopological spatially-extended structures. As an illustration, we
investigate the nonequilibrium dynamics of spontaneous symmetry-breaking in
three spatial dimensions. In particular, we focus on a model where a real
scalar field, prepared initially in a symmetric thermal state, is quenched to a
broken-symmetric state. For a certain range of initial temperatures,
spatially-localized, long-lived structures known as oscillons emerge in
synchrony and remain until the field reaches equilibrium again. We show that
the RCE correlates with the number-density of oscillons, thus offering a
quantitative measure of the emergence of nonperturbative spatiotemporal
patterns that can be generalized to a variety of physical systems.Comment: LaTeX, 9 pages, 5 figures, 1 tabl
- …