143 research outputs found

    Rapid removal of phenol from aqueous solutions by AC_Fe3O4 nano-composite: Kinetics and equilibrium studies

    Get PDF
    Background and purpose: Phenol and its derivatives are used as raw material in many chemical, pharmaceutical and petrochemical industries. It is classified as priority pollutant, due to its high toxicity. In this study, the magnetic activated carbon nano-composite was used for quick removal of phenol. Materials and methods: The activated carbon was modified by magnetic nano-particles. Then physical properties of the adsorbent were investigated using BET, XRD and SEM. Afterwards, adsorption behavior of phenol onto the adsorbent was studied considering various parameters such as: pH, phenol concentration, contact time and adsorbent dosage. Also, the isotherms and adsorption kinetics model was studied. Results: BET analysis showed 10.25% decrease in the specific area of activated carbon after being amended by the Fe3O4 nano-particles. SEM and XRD confirmed the presence of Fe3O4 nanoparticles on the activated carbon. Optimum absorption points in this process were pH=8, contact time of 15 min and adsorbent dose 2 g/L. The Longmuir isotherm and pseudo-second-order kinetics were fitted to the data. The maximum adsorption capacity of phenol on AC_Fe3O4 was 84.033 mg/g. Conclusion: Creating magnetic properties on the activated carbon which has a high adsorption capacity of phenol could result in quick separation of phenol from aqueous solutions. Also, this adsorbent could be widely applied since it is inexpensive and simple to use. © 2015, Mazandaran University of Medical Sciences. All rights reserved

    Catalytic Ozonation of Phenolic Wastewater: Identification and Toxicity of Intermediates

    Get PDF
    A new strategy in catalytic ozonation removal method for degradation and detoxification of phenol from industrial wastewater was investigated. Magnetic carbon nanocomposite, as a novel catalyst, was synthesized and then used in the catalytic ozonation process (COP) and the effects of operational conditions such as initial pH, reaction time, and initial concentration of phenol on the degradation efficiency and the toxicity assay have been investigated. The results showed that the highest catalytic potential was achieved at optimal neutral pH and the removal efficiency of phenol and COD is 98.5% and 69.8%, respectively. First-order modeling demonstrated that the reactions were dependent on the initial concentration of phenol, with kinetic constants varying from 0.038 min−1 ([phenol]o = 1500mg/L) to 1.273 min−1 ([phenol]o = 50mg/L). Bioassay analysis showed that phenol was highly toxic to Daphnia magna (LC50 96 h = 5.6mg/L). Comparison of toxicity units (TU) of row wastewater (36.01) and the treated effluent showed that TU value, after slightly increasing in the first steps of ozonation for construction of more toxic intermediates, severely reduced at the end of reaction (2.23).Thus, COP was able to effectively remove the toxicity of intermediates which were formed during the chemical oxidation of phenolic wastewaters

    Photocatalytic degradation and mineralization of diazinon in aqueous solution using nano-TiO2(Degussa, P25): kinetic and statistical analysis

    Get PDF
    Abstract: In this study, photocatalytic degradation of diazinon was investigated using nano-TiO2, Degussa P25, as a photocatalyst and the effects of some operational parameters such as aeration, pH, photocatalyst concentration, and the irradiation time were also examined. Dispersive liquid-liquid microextraction technique was used to extract and pre-concentration of residual diazinon from the liquid samples and all experiments were carried out by gas chromatography. Amount of degradation and mineralization were determined by gas chromatograph with flame ionization detector (GC/FID) and COD measurements, respectively. The optimum condition for degradation of diazinon has been obtained in the pH 6, [nano-TiO2] = 0.2 g/L, and [time] = 120 min. In the optimal condition the removal efficiency of diazinon and COD were 99.64 and 65%, respectively. The results have shown that the nano-TiO2, aeration and time of reaction have a positive effect on photocatalytic degradation of diazinon and COD removal. Statistical analysis showed that the maximum removal of diazinon and COD were due to UV irradiation (71%, 41%), exposure time (16%, 39%), aeration (7%, 4%), and increased concentration of nano-TiO2 (0.4%, 2%), respectively; and the kinetics of photodegradation were found to follow a first-order kinetic model and the constant rate, at optimal condition, was 0.038 (min−1). © 2014 Balaban Desalination Publications. All rights reserved

    Heterogeneous catalytic ozonation of 2, 4-dinitrophenol in aqueous solution by magnetic carbonaceous nanocomposite: catalytic activity and mechanism

    Get PDF
    Herein, the catalytic properties of a carbonaceous nanocomposite in the catalytic ozonation process (COP) of 2, 4-dinitrophenol (2, 4-DNP) were investigated and the results were compared with those obtained from single ozonation process (SOP). Magnetic carbonaceous nanocomposite, as a novel catalyst, was applied to optimize the condition for the removal of 2, 4-DNP in the COP, and the influential parameters such as pH, catalyst dosage, addition of radical scavengers, and durability were all evaluated. The results showed that the degradation efficiency of 2, 4-DNP and COD in the COP (98.2, 92) was higher compared to the SOP (75, 61) and the highest catalytic potential was achieved at an optimal pH of 6. The first-order modeling demonstrated that the reactions were dependent on the concentration of the catalyst, with the kinetic constants varying from 0.022 (1/min) in the SOP to 1.377 (1/min) in the COP at the catalyst dosage of 4 g/L and the optimum concentration of catalyst (2 g/L). The addition of radical scavenger noticeably diminished the removal efficiency of 2, 4-DNP in the SOP from 75 down to 54, while the corresponding values for the COP dropped from 98.2 to 93. Furthermore, a negligible reduction in the catalytic properties of the catalyst was observed (~5) after five-time reuse. The results also revealed that the applied method is effectively suitable for the removal of 2, 4-DNP contaminant from industrial wastewaters. © 2015 Balaban Desalination Publications. All rights reserved

    Survey of parasitic contamination of sewage sludges in northern Iran

    Get PDF
    The use of sewage sludge as fertilizer in agriculture is a convenient and economic solution, but it is essential to monitor presence of parasitic contamination. This study investigated parasites in sewage sludge of wastewater treatment plant in Gorgan, Iran. This descriptive-analytical study was performed on 18 sewage sludge samples collected from wastewater treatment plant of Gorgan within 6 months with three repeatitions per month. The samples were analyzed in the laboratory of School of Public Health at Golestan University of Medical Sciences. Analysis of parasites was done using Bailenger method of counting parasites in chamber of McMaster slides with volume of 0.3 ml. The results showed that majority of parasite eggs in the sewage sludge was related to nematodes. The dominant nematode eggs detected were related to Ancylostoma duodenale, Necator americanus and Enterobious vermicolaris. However, no parasite was found in dried sewage sludge. Considering the amount of parasite eggs in the returned sludge, it is necessary to modify the treatment process. However, it is permissible to use dried sewage sludge as agricultural fertilizer.Keywords: Parasite eggs, Protozoa, Sewage sludge, Ira

    Can Ensemble of Classifiers Provide Better Recognition Results in Packaging Activity?

    Full text link
    Skeleton-based Motion Capture (MoCap) systems have been widely used in the game and film industry for mimicking complex human actions for a long time. MoCap data has also proved its effectiveness in human activity recognition tasks. However, it is a quite challenging task for smaller datasets. The lack of such data for industrial activities further adds to the difficulties. In this work, we have proposed an ensemble-based machine learning methodology that is targeted to work better on MoCap datasets. The experiments have been performed on the MoCap data given in the Bento Packaging Activity Recognition Challenge 2021. Bento is a Japanese word that resembles lunch-box. Upon processing the raw MoCap data at first, we have achieved an astonishing accuracy of 98% on 10-fold Cross-Validation and 82% on Leave-One-Out-Cross-Validation by using the proposed ensemble model

    Rapid removal of phenol from aqueous solutions by ACFe<inf>3</inf>O<inf>4</inf> nano-composite: Kinetics and equilibrium studies

    Get PDF
    Background and purpose: Phenol and its derivatives are used as raw material in many chemical, pharmaceutical and petrochemical industries. It is classified as priority pollutant, due to its high toxicity. In this study, the magnetic activated carbon nano-composite was used for quick removal of phenol. Materials and methods: The activated carbon was modified by magnetic nano-particles. Then physical properties of the adsorbent were investigated using BET, XRD and SEM. Afterwards, adsorption behavior of phenol onto the adsorbent was studied considering various parameters such as: pH, phenol concentration, contact time and adsorbent dosage. Also, the isotherms and adsorption kinetics model was studied. Results: BET analysis showed 10.25 decrease in the specific area of activated carbon after being amended by the Fe3O4 nano-particles. SEM and XRD confirmed the presence of Fe3O4 nanoparticles on the activated carbon. Optimum absorption points in this process were pH=8, contact time of 15 min and adsorbent dose 2 g/L. The Longmuir isotherm and pseudo-second-order kinetics were fitted to the data. The maximum adsorption capacity of phenol on ACFe3O4 was 84.033 mg/g. Conclusion: Creating magnetic properties on the activated carbon which has a high adsorption capacity of phenol could result in quick separation of phenol from aqueous solutions. Also, this adsorbent could be widely applied since it is inexpensive and simple to use. © 2015, Mazandaran University of Medical Sciences. All rights reserved

    Water quality zoning in babolrood river using national sanitation foundation water quality index and geographic information system

    Get PDF
    Background and purpose: Quality of surface waters is important for different uses and identification of contaminated sites and pollutants leads to appropriate use of water. So, the aim of this study was to evaluate the quality of water Babolrood. Materials and methods: In this cross-sectional study, sampling was conducted in ten stations during summer 2013. Data was analyzed using National Sanitation Foundation Water Quality Index (NSFWQI) and SPSS, and then the river�s path was zoned by Geographic Information System (GIS). Results: Based on NSFWQI, the best status was found in second station (79, good) and the worst was observed in station 10 (52, moderate). Conclusion: Based on NSFWQI, the quality of river was good in upstream and moderate in downstream, indicating human as the main responsible for low quality of water. © 2016, Mazandaran University of Medical Sciences. All right reserved

    Water-induced modulation of Helicobacter pylori virulence properties

    Get PDF
    While the influence of water in Helicobacter pylori culturability and membrane integrity has been extensively studied, there are little data concerning the effect of this environment on virulence properties. Therefore, we studied the culturability of water-exposed H. pylori and determined whether there was any relation with the bacterium’s ability to adhere, produce functional components of pathogenicity and induce inflammation and alterations in apoptosis in an experimental model of human gastric epithelial cells. H. pylori partially retained the ability to adhere to epithelial cells even after complete loss of culturability. However, the microorganism is no longer effective in eliciting in vitro host cell inflammation and apoptosis, possibly due to the non-functionality of the cag type IV secretion system. These H. pylori-induced host cell responses, which are lost along with culturability, are known to increase epithelial cell turnover and, consequently, could have a deleterious effect on the initial H. pylori colonisation process. The fact that adhesion is maintained by H. pylori to the detriment of other factors involved in later infection stages appears to point to a modulation of the physiology of the pathogen after water exposure and might provide the microorganism with the necessary means to, at least transiently, colonise the human stomach.FCT (SFRH/BD/24579/2005) (to NMG
    corecore