Metastability and the Casimir Effect in Micromechanical Systems

Electrostatic and Casimir interactions limit the range of positional stability of electrostatically-actuated or capacitively-coupled mechanical devices. We investigate this range experimentally for a generic system consisting of a doubly-clamped Au suspended beam, capacitively-coupled to an adjacent stationary electrode. The mechanical properties of the beam, both in the linear and nonlinear regimes, are monitored as the attractive forces are increased to the point of instability. There "pull-in" occurs, resulting in permanent adhesion between the electrodes. We investigate, experimentally and theoretically, the position-dependent lifetimes of the free state (existing prior to pull-in). We find that the data cannot be accounted for by simple theory; the discrepancy may be reflective of internal structural instabilities within the metal electrodes.Comment: RevTex, 4 pages, 4 figure

Influence of random roughness on the Casimir force at small separations

The influence of random surface roughness of Au films on the Casimir force is explored with atomic force microscopy in the plate-sphere geometry. The experimental results are compared to theoretical predictions for separations ranging between 20 and 200 nm. The optical response and roughness of the Au films were measured and used as input in theoretical predictions. It is found that at separations below 100 nm, the roughness effect is manifested through a strong deviation from the normal scaling of the force with separation distance. Moreover, deviations from theoretical predictions based on perturbation theory can be larger than 100%.Comment: 18, 5 figure

Efficient out-coupling and beaming of Tamm optical states via surface plasmon polariton excitation

We present evidence of optical Tamm states to surface plasmon polariton (SPP) coupling. We experimentally demonstrate that for a Bragg stack with a thin metal layer on the surface, hybrid Tamm-SPP modes may be excited when a grating on the air-metal interface is introduced. Out-coupling via the grating to free space propagation is shown to enhance the transmission as well as the directionality and polarization selection for the transmitted beam. We suggest that this system will be useful on those devices, where a metallic electrical contact as well as beaming and polarization control is needed

Comment on the sign of the Casimir force

I show that reflection positivity implies that the force between any mirror pair of charge-conjugate probes of the quantum vacuum is attractive. This generalizes a recent theorem of Kenneth and Klich to interacting quantum fields, to arbitrary semiclassical bodies, and to quantized probes with non-overlapping wavefunctions. I also prove that the torques on charge-conjugate probes tend always to rotate them into a mirror-symmetric position.Comment: 13 pages, 1 figure, Latex file. Several points clarified and expanded, two references added

Efficient out-coupling and beaming of Tamm optical states via surface plasmon polariton excitation

We present evidence of optical Tamm states to surface plasmon polariton (SPP) coupling. We experimentally demonstrate that for a Bragg stack with a thin metal layer on the surface, hybrid Tamm-SPP modes may be excited when a grating on the air-metal interface is introduced. Out-coupling via the grating to free space propagation is shown to enhance the transmission as well as the directionality and polarization selection for the transmitted beam. We suggest that this system will be useful on those devices, where a metallic electrical contact as well as beaming and polarization control is needed

Casimir forces on a silicon micromechanical chip

Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge because all experiments so far require an external object to be manually positioned close to the mechanical element. Here, by integrating a force-sensing micromechanical beam and an electrostatic actuator on a single chip, we demonstrate the Casimir effect between two micromachined silicon components on the same substrate. A high degree of parallelism between the two near-planar interacting surfaces can be achieved because they are defined in a single lithographic step. Apart from providing a compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes

Stiction, Adhesion Energy and the Casimir Effect in Micromechanical Systems

We measure the adhesion energy of gold using a micromachined doubly-clamped beam. The stress and stiffness of the beam are characterized by measuring the spectrum of mechanical vibrations and the deflection due to an external force. To determine the adhesion energy we induce stiction between the beam and a nearby surface by capillary forces. Subsequent analysis yields a value $\gamma =0.06$ J/m$^{2}$ that is a factor of approximately six smaller than predicted by idealized theory. This discrepancy may be resolved with revised models that include surface roughness and the effect of adsorbed monolayers intervening between the contacting surfaces in these mesoscopic structures.Comment: RevTex, 4 pages, 4 eps figure

Thermofield Dynamics and Casimir Effect for Fermions

A generalization of the Bogoliubov transformation is developed to describe a space compactified fermionic field. The method is the fermionic counterpart of the formalism introduced earlier for bosons (J. C. da Silva, A. Matos Neto, F. C. Khanna and A. E. Santana, Phys. Rev. A 66 (2002) 052101), and is based on the thermofield dynamics approach. We analyse the energy-momentum tensor for the Casimir effect of a free massless fermion field in a $d$-dimensional box at finite temperature. As a particular case the Casimir energy and pressure for the field confined in a 3-dimensional parallelepiped box are calculated. It is found that the attractive or repulsive nature of the Casimir pressure on opposite faces changes depending on the relative magnitude of the edges. We also determine the temperature at which the Casimir pressure in a cubic boc changes sign and estimate its value when the edge of the cybe is of the order of confining lengths for baryons.Comment: 21 pages, 3 figures, to appear in Annals of Physic