104 research outputs found

    Desarrollo de un bioadhesivo para la industria de madera laminada a base de productos renovables

    Get PDF
    Tribunal: Dra. Coelho, Ana Paula; Berberian, Natalia; Tonello, María LauraLa industria de aserrado en Uruguay, genera abundantes residuos, entre ellos la corteza de pino, teniendo hoy en día un uso que se limita a su quema para la generación de energía. Por otro lado, en la industria de la madera, se viene impulsando la investigación con el fin de sustituir parcial o totalmente el formaldehído de las formulaciones adhesivas, por alternativas menos perjudiciales al medioambiente. El objetivo de este estudio fue valorizar el uso de la corteza de Pinus elliottii, plantado e industrializado en Uruguay, a través de la obtención de taninos y su potencial uso en formulaciones adhesivas con sustitución total de formaldehído, para su uso en la industria de la madera. Se identificaron las mejores condiciones de extracción, partiendo de escala laboratorio en el Laboratorio Forestal de la Sede Tacuarembó de la Universidad de la República en Uruguay, y su posterior escalado a 1 litro y 50 litros en la planta piloto de la Unidad de Desarrollo Tecnológico de la Universidad de Concepción, Chile. Las mejores condiciones de escalado se obtuvieron a 65 °C por 2 horas. Una vez obtenido el extracto se realizaron diferentes formulaciones adhesivas usando glyoxal y hexamina con sustitución total de formaldehído y su correspondiente caracterización. La mejor formulación para P elliottii fue con hexamina 7 % a pH 8 y con una temperatura de prensado de 160 °C

    Generación morfológica digital en arquitectura: diseño paramétrico y algoritmos evolucionistas

    Get PDF
    This paper presents results obtained from a research project development carried out in the Design Systems Laboratory, FAU-UNT. This research was oriented to establish techniques and procedures for the production of potentially architectural 3D objects, during conceptual stage. Objects with different scales, feasible to accept architecture, were studied. For their generation, visual programming environments oriented to parametric design, were applied. Parameters, as genomes, were put to work in an "evolutionary algorithm" environment with the purpose to obtain architectural design applications, emulating biological evolutions. The main procedure consists in testing quantitative and qualitative parameters that define each object, until an expected architectural result is reached. Some results obtained are shown.Este trabajo presenta algunos resultados finales obtenidos a partir del desarrollo de un proyecto de investigación llevado a cabo en el Laboratorio de Sistemas de Diseño de la FAU-UNT. La investigación estuvo orientada a establecer técnicas y procedimientos para la producción de objetos 3D potencialmente arquitectónicos durante la etapa de “Concepción Arquitectónica”. En esta presentación se consideran objetos, de diferentes escalas, factibles de aceptar arquitectura y que fueron estudiados y generados en entornos de programación visual orientado al diseño paramétrico, un nuevo paradigma de diseño donde se establecen relaciones entre los partes que definen a un objeto como un todo. Los parámetros de los objetos en estudio fueron puestos a funcionar, a modo de genomas, en un entorno generativo del tipo “algoritmo evolucionista”, rama de la inteligencia artificial que usa métodos de optimización y búsqueda de soluciones basados en los postulados de la evolución biológica aplicado al diseño. A partir de los parámetros que definen a cada objeto, se procede a su evolución hasta alcanzar el propósito buscado. Los resultados obtenidos permitieron evaluar su utilidad y aplicación en entornos de diseños digitales en etapas tempranas de la concepción arquitectónica. La generación automática, aleatoria y dirigida permitió incentivar la creatividad y evaluación de casos impensados. Se muestran algunos resultados obtenidos.Facultad de Arquitectura y Urbanism

    The perception of professionals and users of the quality of care and respect for human rights in four outpatient care facilities of an Italian hospital during the Covid-19 pandemic

    Get PDF
    Background: During the Covid-19 pandemic, delays in providing medical services, dissatisfaction, criticism toward health workers (HW) and the risk of burnout of HW in Italy have been documented. No studies have contrasted the point of view of HW and users on the quality of care and respect for human rights in health facilities. Objective: To compare the perception of users of their satisfaction with the care provided with the perception of HW of their satisfaction with work as well as the perception of the respect of HW “s and users” human rights. Methods: The “Well-Being at work and respect for human rights questionnaire” (WWRR) was administered on a sample of users (142) and HW (154) in four outpatient health care facilities of a hospital in Sardinia, Italy. Results: Users showed higher scores than HW on their satisfaction with the care received (p < 0.0001), the perception of respect for their human rights (p < 0.0001), and availability of resources for care (p < 0.0001). The HW scores were higher than 50% of the maximum in all items, but a relatively low score was reported on the HW’s satisfaction of the resources and the respect for their rights. Conclusion: The satisfaction for care and respect for human rights in the outpatient health services was higher than expected. The relatively low score by the HWs in relation to the satisfaction with the resources and perception of respect for their human rights could be a wake-up call. The study does not involve emergency rooms, wards, or Covid units

    Why Was the Perception of Human Rights Respect and Care Satisfaction So High in Users of Italian Mental Health Services during the COVID-19 Pandemic?

    Get PDF
    The aim of this study was to compare users’ and mental health workers’ (MHW) perception of respect of human rights and job/care satisfaction in mental health services in Italy during the COVID-19 pandemic. A sample of users and MHW of Sardinia, Italy, fulfilled the “WellBeing at work and respect for human rights questionnaire” (WWRR). The study included 240 MHW and 200 users. Users showed a higher level of satisfaction of care than MHW of work, and a higher perception of the satisfaction of users and human rights respected for health workers. Both user and MHW responses were about 85% of the maximum score, except for satisfaction with resources. Responses were higher for users, but users and MHW both showed high levels of satisfaction. In previous surveys, MHW of Sardinia showed higher scores in all items of WWRR, except for satisfaction with resources, compared with workers from other health sectors of the same region, and with MHW from other countries. The low score for satisfaction with resources (in users and staff) is consistent with a progressive impoverishment of resources for mental health care in Italy. The study, although confirming the validity of the Italian model, fully oriented towards community, sets off an alarm bell on the risks resulting from the decrease in resources

    Budding yeast ATM/ATR control meiotic double-strand break (DSB) levels by down-regulating Rec114, an essential component of the DSB-machinery

    Get PDF
    An essential feature of meiosis is Spo11 catalysis of programmed DNA double strand breaks (DSBs). Evidence suggests that the number of DSBs generated per meiosis is genetically determined and that this ability to maintain a pre-determined DSB level, or "DSB homeostasis", might be a property of the meiotic program. Here, we present direct evidence that Rec114, an evolutionarily conserved essential component of the meiotic DSB-machinery, interacts with DSB hotspot DNA, and that Tel1 and Mec1, the budding yeast ATM and ATR, respectively, down-regulate Rec114 upon meiotic DSB formation through phosphorylation. Mimicking constitutive phosphorylation reduces the interaction between Rec114 and DSB hotspot DNA, resulting in a reduction and/or delay in DSB formation. Conversely, a non-phosphorylatable rec114 allele confers a genome-wide increase in both DSB levels and in the interaction between Rec114 and the DSB hotspot DNA. These observations strongly suggest that Tel1 and/or Mec1 phosphorylation of Rec114 following Spo11 catalysis down-regulates DSB formation by limiting the interaction between Rec114 and DSB hotspots. We also present evidence that Ndt80, a meiosis specific transcription factor, contributes to Rec114 degradation, consistent with its requirement for complete cessation of DSB formation. Loss of Rec114 foci from chromatin is associated with homolog synapsis but independent of Ndt80 or Tel1/Mec1 phosphorylation. Taken together, we present evidence for three independent ways of regulating Rec114 activity, which likely contribute to meiotic DSBs-homeostasis in maintaining genetically determined levels of breaks

    SLY regulates genes involved in chromatin remodeling and interacts with TBL1XR1 during sperm differentiation

    Get PDF
    Sperm differentiation requires unique transcriptional regulation and chromatin remodeling after meiosis to ensure proper compaction and protection of the paternal genome. Abnormal sperm chromatin remodeling can induce sperm DNA damage, embryo lethality and male infertility, yet, little is known about the factors which regulate this process. Deficiency in Sly, a mouse Y chromosome-encoded gene expressed only in postmeiotic male germ cells, has been shown to result in the deregulation of hundreds of sex chromosome-encoded genes associated with multiple sperm differentiation defects and subsequent male infertility. The underlying mechanism remained, to date, unknown. Here, we show that SLY binds to the promoter of sex chromosome-encoded and autosomal genes highly expressed postmeiotically and involved in chromatin regulation. Specifically, we demonstrate that Sly knockdown directly induces the deregulation of sex chromosome-encoded H2A variants and of the H3K79 methyltransferase DOT1L. The modifications prompted by loss of Sly alter the postmeiotic chromatin structure and ultimately result in abnormal sperm chromatin remodeling with negative consequences on the sperm genome integrity. Altogether our results show that SLY is a regulator of sperm chromatin remodeling. Finally we identified that SMRT/N-CoR repressor complex is involved in gene regulation during sperm differentiation since members of this complex, in particular TBL1XR1, interact with SLY in postmeiotic male germ cells.This work was supported by Inserm (Institut National de la Sante et de la Recherche Medicale), the Agence Nationale de la Recherche program ANR-12–JSV2-0005–01 (to JC), Labex ‘Who am I?’(ANR-11- LABX-0071 under program ANR-11-IDEX-0005-01) and a Marie Curie fellowship FP7-PEOPLE-2010-IEF-273143 (to JC

    The SMC-5/6 Complex and the HIM-6 (BLM) Helicase Synergistically Promote Meiotic Recombination Intermediate Processing and Chromosome Maturation during<i> Caenorhabditis elegans</i> Meiosis

    Get PDF
    Meiotic recombination is essential for the repair of programmed double strand breaks (DSBs) to generate crossovers (COs) during meiosis. The efficient processing of meiotic recombination intermediates not only needs various resolvases but also requires proper meiotic chromosome structure. The Smc5/6 complex belongs to the structural maintenance of chromosome (SMC) family and is closely related to cohesin and condensin. Although the Smc5/6 complex has been implicated in the processing of recombination intermediates during meiosis, it is not known how Smc5/6 controls meiotic DSB repair. Here, using Caenorhabditis elegans we show that the SMC-5/6 complex acts synergistically with HIM-6, an ortholog of the human Bloom syndrome helicase (BLM) during meiotic recombination. The concerted action of the SMC-5/6 complex and HIM-6 is important for processing recombination intermediates, CO regulation and bivalent maturation. Careful examination of meiotic chromosomal morphology reveals an accumulation of inter-chromosomal bridges in smc-5; him-6 double mutants, leading to compromised chromosome segregation during meiotic cell divisions. Interestingly, we found that the lethality of smc-5; him-6 can be rescued by loss of the conserved BRCA1 ortholog BRC-1. Furthermore, the combined deletion of smc-5 and him-6 leads to an irregular distribution of condensin and to chromosome decondensation defects reminiscent of condensin depletion. Lethality conferred by condensin depletion can also be rescued by BRC-1 depletion. Our results suggest that SMC-5/6 and HIM-6 can synergistically regulate recombination intermediate metabolism and suppress ectopic recombination by controlling chromosome architecture during meiosis

    "Global change, sostenibilità ambientale e Biodiversità": il PCTO delle classi III D e III E, indirizzo (Scienze Applicate) del Liceo Scientifico "Pietro Ruggeri" di Marsala presso l'IAS - CNR Sede Secondaria di Capo Granitola

    Get PDF
    Con la partecipazione ad Esperienza InSegna 2020 (https://www.esperienzainsegna.it/) - Cambiamento climatico e sostenibilità ambientale - organizzata dall'Associazione PALERMOSCIENZA, da martedì 18 a domenica 23 febbraio 2020 presso l'Università degli Studi di Palermo (Edificio 19 - Viale delle Scienze) - l'IAS – CNR porta a termine un'esperienza formativa di successo rivolta a 54 allievi delle classi III D e III E, indirizzo Scienze Applicate, del Liceo Scientifico "Pietro Ruggeri" di Marsala (TP) presso l'IAS – CNR – S. S. di Capo Granitola nell'ambito del Percorso per le competenze trasversali e per l'orientamento (PCTO ex ASL), e regolamentata dalla convenzione Prot. IAS n° 0000030 del 08/01/2020. Il Direttore f.f. di IAS – CNR il Dottor Mario Sprovieri e il Responsabile dell'IAS – CNR Sede Secondaria di Capo Granitola, il Dottor Giorgio Tranchida, hanno promosso e supportato le attività del PCTO, anche quest'anno come negli anni passati, accogliendole come una irrinunciabile occasione per i tecnici, i tecnologi e i ricercatori di perseguire la " terza missione" degli Enti di Ricerca, attraverso l'applicazione diretta, la valorizzazione e l'impiego della conoscenza per contribuire allo sviluppo sociale, culturale ed economico della società. Sono state 25 le unità di personale (8 ricercatori, 2 tecnologi, 11 tecnici e 4 assegnisti di ricerca) dell'IAS – CNR, Sedi Secondarie di Capo Granitola e di Palermo, che hanno lavorato in sinergia e con entusiasmo, presso la S. S. di Capo Granitola, permettendo di elaborare una proposta formativa ricca di contenuti scientifici da trasferire agli alunni delle classi III D e III E del Liceo Scientifico "P. Ruggeri". Il personale scientifico, grazie all'esperienza acquisita negli anni, è ben consapevole del fatto che le pratiche attive, come l'apprendimento collaborativo ed i piccoli gruppi di lavoro, risultano altamente produttive permettendo all'alunno di non acquisire solo conoscenze, ma soprattutto abilità e competenze. Al fine di accrescere le opportunità di conoscenza e accendere l'interesse negli studenti, il PCTO, dal titolo "Global change, sostenibilità ambientale e Biodiversità", è stato programmato e realizzato attraverso una prima parte seminariale, un'esperienza teorico-pratica su campo (per prelevare campioni da analizzare) e una parte laboratoriale. Successivamente: i) una parte relativa a seminari teorico-pratici riguardante l'analisi statistica dei dati scientifici; ii) un gioco di ruolo finalizzato all'apprendimento collaborativo relativo dei concetti scientifici acquisiti ed, infine iii) una visita presso l'Osservatorio Regionale della Biodiversità Siciliano (ORBS) che è ospitato presso la struttura di Capo Granitola. Il personale scientifico ha rivestito un ruolo importante, delicato, di grossa responsabilità nell'accompagnare gli alunni in questo percorso di orientamento (PCTO) e affinché tutti gli alunni "imparassero ad imparare" nel modo per loro più corretto, hanno concordato nell'utilizzare diverse metodologie didattiche efficaci quali: interdisciplinarietà, utilizzo di parole chiavi, cooperative learning, didattica laboratoriale, peer education, problem solving, role playing, studio di caso, discussione, project work. Le metodologie didattiche utilizzate hanno consentito di valorizzare il potenziale di apprendimento
    corecore