Factors associated with inbreeding in charollais lambs

Inbreeding within sheep populations is a relatively understudied area due to limited pedigree information. This study assessed the level of inbreeding within a Charollais sheep population. Data were obtained from35,220 Charollais lambs between the years2000 to 2018 from performance-recorded flocks in the UK. Differences among flocks, study years, lamb eight-week body weight categories and if embryo transfer lambs were assessed. Mean inbreeding value for Charollaislambswas2.8% (s.e. ± 0.1), with a range of 0% to 31%. While the proportion of lambs with an inbreeding value of >7% has been relatively stable at 0.1 or less since 2006, the general trend is an increasing mean inbreeding coefficient for the population in recent years. After adjusting lamb inbreeding coefficient for fixed and random effects, the average inbreeding coefficient was found to be lower for lambs in the heavier eight-week body weight category (>32kg), for certain flocks (mean ranged from 0.4% to 14.6%), and for embryo transfer lambs. Monitoring of inbreeding and approaches used for genetic selection in flocks can help minimise poor lamb performance(i.e. potentially lower growth and body weight) associated with inbreeding

Characterisation of Cryogenic Material Properties of 3D-Printed Superconducting Niobium using a 3D Lumped Element Microwave Cavity

We present an experimental characterisation of the electrical properties of 3D-printed Niobium. The study was performed by inserting a 3D-printed Nb post inside an Aluminium cylindrical cavity, forming a 3D lumped element re-entrant microwave cavity resonator. The resonator was cooled to temperatures below the critical temperature of Niobium (9.25K) and then Aluminium (1.2K), while measuring the quality factors of the electromagnetic resonances. This was then compared with finite element analysis of the cavity and a measurement of the same cavity with an Aluminium post of similar dimensions and frequency, to extract the surface resistance of the Niobium post. The 3D-printed Niobium exhibited a transition to the superconducting state at a similar temperature to the regular Niobium, as well as a surface resistance of $3.1\times10^{-4}$ $\Omega$. This value was comparable to many samples of traditionally machined Niobium previously studied without specialised surface treatment. Furthermore, this study demonstrates a simple new method for characterizing the material properties of a relatively small and geometrically simple sample of superconductor, which could be easily applied to other materials, particularly 3D-printed materials. Further research and development in additive manufacturing may see the application of 3D-printed Niobium in not only superconducting cavity designs, but in the innovative technology of the future.Comment: 5 pages, 4 figure

Integration of OpenCalphad thermo-chemical solver in PLEIADES/ALCYONE fuel performance code

International audienceThe ALCYONE fuel performance code, co-developed by CEA, EDF and Framatome, within the PLEIADES software environment provides a multidimensional modeling for detailed analysis of PWR fuel elements behavior under irradiation [1]. Iodine-Stress Corrosion Cracking is one of the physical phenomena of major interest for cladding design and long term operation of PWRs. In a first step towards I-SCC simulations, the thermochemical code ANGE was integrated in PLEIADES [2]. ANGE, a modified version of SOLGASMIX, enables to compute thermo-chemical equilibria using the TBASE database [3] and associate species description [4] but has some limitations and cannot be used to solve chemical systems based on the Compound Energy Formalism, such as the one proposed in the TAF-ID [5]. Consequently, a robust, efficient and free numerical tool, OpenCalphad [6], was introduced in PLEIADES. In this work, we focus our presentation on the calculation of complex multi-component systems representative of fuel elements behavior under irradiation. From the results of in-reactor power transient calculations (1D-2D-3D), we show that ALCYONE/OpenCalphad is much faster than ALCYONE/ANGE. We note a decrease of the CPU time by almost a factor 4 that can be explained by the OpenCalphad solver itself and by a set of numerical strategies implemented to start a thermodynamic calculation on a mesh node by using another calculated equilibrium as an initial solution. We also show through first results the capacity and the robustness of the ALCYONE/OpenCalphad coupling to do in-reactor power transients calculations (1D-2D-3D) using the TAF-ID. In the latter, the models are more complicated and the possible phases are greater in number than in the TBASE database. For calculations performed in the same conditions as those done with the TBASE database, we note a slight increase of the CPU time that can be reduced by calculating several thermodynamic equilibria simultaneously with a multithread approach.References[1] V. Marelle, et al. New developments in ALCYONE 2.0 fuel performance code, Top Fuel, Boise ID (2016)[2] B. Baurens, et al., J. Nucl. Mater. 452 (2014) 578[3] E.H.P. Cordfuncke, R.J.M. Konings, J. Phase Equilibria 14 [4] (1993)[4] T.M. Besmann, Comprehensive Nucl. Mater. 1.17 (2012)[5] C. Gueneau et al., J. Nucl. Mater. 419 (2011) 147[6] B. Sundman, et al, Integ. Mater. Manuf. Innov. 4 (2015)

Facial Emotion and Identity Processing Development in 5- to 15-Year-Old Children

Most developmental studies of emotional face processing to date have focused on infants and very young children. Additionally, studies that examine emotional face processing in older children do not distinguish development in emotion and identity face processing from more generic age-related cognitive improvement. In this study, we developed a paradigm that measures processing of facial expression in comparison to facial identity and complex visual stimuli. The three matching tasks were developed (i.e., facial emotion matching, facial identity matching, and butterfly wing matching) to include stimuli of similar level of discriminability and to be equated for task difficulty in earlier samples of young adults. Ninety-two children aged 5–15 years and a new group of 24 young adults completed these three matching tasks. Young children were highly adept at the butterfly wing task relative to their performance on both face-related tasks. More importantly, in older children, development of facial emotion discrimination ability lagged behind that of facial identity discrimination

Tertiary development of the Polish and eastern Slovak parts of the Carpathian accretionary wedge : insights from balanced cross-sections

During Eocene-Sarmatian, a Polish-eastern Slovak portion of the Outer West Carpathian accretionary wedge was deformed in front of the ALCAPA terrane. This portion advanced into the area of the subducting remnant Carpathian Flysch Basin, a large oceanic tract left in front of the Alpine orogen. Western parts of the wedge were characterized by a noticeable lack of involvement of thick-skin thrusting and by a predominant development of fault-propagation folds. Eastern parts of the wedge were characterized by the involvement of thick-skin thrusting, triangle zones and back-thrusts. The frontal portion of the wedge was characterized by a décollement formed along the shale and gypsum formations of the Badenian molasse sediments, which resulted in the increased width of the thrust sheets. Forelandward thinning of foreland basin sediments indicates that the portion of the European Platform attached to the subducting oceanic lithosphere flexed underneath the advancing Carpathians as early as the Eocene. Oligocene sediments record syn-depositional thrusting by abrupt thickness changes over short distances. Younger periods of the thrusting are documented by the Eggenburgian-Karpatian piggy-back basin carried by thrust sheets in the frontal portion of the ALCAPA terrane, the Early Miocene age of the youngest sediments in the central portion of the wedge and involvement of the middle Badenian molasse sediments in the frontal portion of the wedge. The end of the shortening is documented by the lower Sarmatian end of the strike-slip fault activity behind the wedge, by the middle Sarmatian transgression over the deformed wedge in the Orava-Nowy Targ Basin, which is located in the rear portion of the wedge, and by the Sarmatian undeformed sediments sealing the wedge front. The existence of the forebulge in front of the advancing Carpathians is documented by local Eocene, Oligocene and Lower Miocene unconformities in the frontal portion of the wedge

Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases

Laves phase alloys are promising materials for several structural applications, but the extreme brittleness is the predominant shortcoming of a Laves matrix. One potential solution to overcome this shortcoming is to alloy Laves matrix with some soft matrix. A group of Ti-35Zr-5Fe-xMn (x = 0, 2, 4, 6, 8 wt%) alloys was cast with an aim to improve deformation in Laves alloy compositions. The phase and microstructure analyses reveal dual phase matrices, including a β phase and a C14 type Laves phase in the investigated alloys. The mechanical properties such as yield strength, hardness and plastic strain for the investigated alloys are found to be significantly sensitive to volume fraction of the Laves phase. Ti-35Zr-5Fe shows impressive ultimate compressive strength (~1.7 GPa), yield strength (1138 MPa) and large plastic strain (23.2 %). The fracture mechanisms are dependent on the microstructure of the alloys. Additionally, the work-hardening ability of the investigated alloys have also been evaluated based on the analyses of slip band patterns formed around the micro-hardness indentations. Notably, the extreme brittleness is not encountered in all the Ti-35Zr-5Fe-xMn alloys and all exhibit very good compressive elongation including the maximum (32.5 %) in Ti-35Zr-5Fe

Effect of the GaAsP shell on optical properties of self-catalyzed GaAs nanowires grown on silicon

We realize growth of self-catalyzed core-shell GaAs/GaAsP nanowires (NWs) on Si substrates using molecular-beam epitaxy. Transmission electron microscopy (TEM) of single GaAs/GaAsP NWs confirms their high crystal quality and shows domination of the zinc-blende phase. This is further confirmed in optics of single NWs, studied using cw and time-resolved photoluminescence (PL). A detailed comparison with uncapped GaAs NWs emphasizes the effect of the GaAsP capping in suppressing the non-radiative surface states: significant PL enhancement in the core-shell structures exceeding 2000 times at 10K is observed; in uncapped NWs PL is quenched at 60K whereas single core-shell GaAs/GaAsP NWs exhibit bright emission even at room temperature. From analysis of the PL temperature dependence in both types of NW we are able to determine the main carrier escape mechanisms leading to the PL quench

High specific strength and stiffness structures produced using selective laser melting

Selective Laser Melting (SLM) was used to fabricate scaffolds using the titanium alloy Ti-6Al-4V. Two types of high porosity open-cell structures were manufactured: the first built from topology optimised designs with maximised stiffness, and the second from gyroid labyrinths. In mechanical compression tests the scaffolds demonstrate exceptional strength-and stiffness-to-weight ratios. In particular, for densities in the range 0.2-0.8 g/cm(3) the topology optimised scaffolds have specific strength and stiffness that are superior to those of comparable materials in the literature. In addition, the optimised scaffolds have the benefit of being elastically isotropic. The results of finite element calculations accurately match the measured stiffness of the scaffolds. Calculated strain energy distributions provide insight into how the high stiffness and strength of the optimised designs is connected to their efficient distribution of load. (C) 2014 Elsevier Ltd. All rights reserved

Light-emitting diodes by band-structure engineering in van der Waals heterostructures

The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals.The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative di�erential resistance tunnelling transistors photovoltaic devices and so on. Here, we take the complexity and functionality of such van der Waals heterostructures to the next level by introducing quantum wells (QWs) engineered with one atomic plane precision. We describe light-emitting diodes (LEDs) made by stacking metallic graphene, insulating hexagonal boron nitride and various semiconducting monolayers into complex but carefully designed sequences. Our first devices already exhibit an extrinsic quantum e�ciency of nearly 10% and the emission can be tuned over a wide range of frequencies by appropriately choosing and combining 2D semiconductors (monolayers of transition metal dichalcogenides). By preparing the heterostructures on elastic and transparent substrates, we show that they can also provide the basis for flexible and semi-transparent electronics. The range of functionalities for the demonstrated heterostructures is expected to grow further on increasing the number of available 2D crystals and improving their electronic quality