614 research outputs found
EU Peatlands: Current Carbon Stocks and Trace Gas Fluxes
Peatlands in Europe has formed a significant sink for atmospheric CO2 since the last glacial maximum. Currently they are estimated to hold ca. 42 Gt carbon in the form of peat and are therefore a considerable component in the European carbon budget. Due to the generally wet soil conditions in peatlands they are also significant emitters of the strong greenhouse gas (GHG) methane (CH4) and in some cases also of nitrous oxide (N2O). The EU funded CarboEurope-GHG Concerted Action attempts to develop a reliable and complete greenhouse gas budget for Europe and this report aims to provide a review and synthesis of the available information about GHG exchanges in European peatlands and their underlying processes. A best estimate for all the European countries shows that some are currently sinks for atmospheric CO2 while others are sources. In contrast, for CH4 and N2O, only the sources are relevant. Whilst some countries are CO2 sinks, all countries are net GHG emitters from peatlands. The results presented, however, carry large uncertainties, which cannot be adequately quantified yet. One outstanding uncertainty is the distribution of land use types, particular in Russia, the largest European peat nation. The synthesis of GHG exchange, nevertheless, indicates some interesting features. Russia hosts an estimated 41% of European peatlands and contributes most to all GHG exchanges (CO2: 25%, CH4: 52%, N2O: 26%, Total: 37%). Germany is the second-largest emitter (12% of European total) although it contains only 3.2% of European peatlands. The reason is the use of most of the peatland area for intensive cropland and grassland. The largest CO2 emitters are countries with large agricultural peatland areas (Russia, Germany, Belarus, Poland), the largest N2O emitters are those with large agricultural fen areas (Russia, Germany, Finland). In contrast, the largest CH4 emitters are concentrated in regions with large areas of intact mires, namely Russia and Scandinavia. High average emission densities above 3.5 t C-equiv. ha-1 are found in the Southeast Mediterranean, Germany and the Netherlands where agricultural use of peatlands is intense. Low average emission densities below 0.3 t C-equiv. ha-1 occur where mires and peatland forests dominate, e.g. Finland and the UK. This report concludes by pointing at key gaps in our knowledge about peatland carbon stocks and GHG exchanges which include insufficient basic information on areal distribution of peatlands, measurements of peat depth and also a lack of flux datasets providing full annual budgets of GHG exchanges
A cross analysis of existing methods for modelling household appliance use
This paper presents a cross-analysis of the existing methods for modelling the use of household appliances and aims to provide insights into modelling approaches for researchers and designers. Five factors regarding appliance use modelling that have a significant impact on the modelling performance are defined: consideration of the intra/inter-household variation, consideration of the influence of socio-demographic conditions, time resolution of the data, quantification of model calibration parameters and applicability to a variety of modelling contexts. Four existing modelling methods commonly used in literature for modelling appliance use are studied to address these factors. Monitored data of 333 multi-family buildings in Japan and a Japanese time use survey are used in the cross-analysis to simulate the switch-on time profiles for the case of washing machines. The design of future research studies (including monitoring strategies, modelling and sample sizes) are discussed to further improve the ability to model home appliance use
Chemical cycling and deposition of atmospheric mercury in Polar Regions: review of recent measurements and comparison with models
Mercury (Hg) is a worldwide contaminant that can cause adverse health effects to wildlife and humans. While atmospheric modeling traces the link from emissions to deposition of Hg onto environmental surfaces, large uncertainties arise from our incomplete understanding of atmospheric processes (oxidation pathways, deposition, and re-emission). Atmospheric Hg reactivity is exacerbated in high latitudes and there is still much to be learned from polar regions in terms of atmospheric processes. This paper provides a synthesis of the atmospheric Hg monitoring data available in recent years (2011–2015) in the Arctic and in Antarctica along with a comparison of these observations with numerical simulations using four cutting-edge global models. The cycle of atmospheric Hg in the Arctic and in Antarctica presents both similarities and differences. Coastal sites in the two regions are both influenced by springtime atmospheric Hg depletion events and by summertime snowpack re-emission and oceanic evasion of Hg. The cycle of atmospheric Hg differs between the two regions primarily because of their different geography. While Arctic sites are significantly influenced by northern hemispheric Hg emissions especially in winter, coastal Antarctic sites are significantly influenced by the reactivity observed on the East Antarctic ice sheet due to katabatic winds. Based on the comparison of multi-model simulations with observations, this paper discusses whether the processes that affect atmospheric Hg seasonality and interannual variability are appropriately represented in the models and identifies research gaps in our understanding of the atmospheric Hg cycling in high latitudes
Evaluating simplified chemical mechanisms within present-day simulations of the Community Earth System Model version 1.2 with CAM4 (CESM1.2 CAM-chem): MOZART-4 vs. Reduced Hydrocarbon vs. Super-Fast chemistry
While state-of-the-art complex chemical mechanisms expand our understanding
of atmospheric chemistry, their sheer size and computational requirements
often limit simulations to short lengths or ensembles to only a few members.
Here we present and compare three 25-year present-day offline simulations
with chemical mechanisms of different levels of complexity using the
Community Earth System Model (CESM) Version 1.2 CAM-chem (CAM4): the Model
for Ozone and Related Chemical Tracers, version 4 (MOZART-4) mechanism, the
Reduced Hydrocarbon mechanism, and the Super-Fast mechanism. We show that,
for most regions and time periods, differences in simulated ozone chemistry
between these three mechanisms are smaller than the model–observation
differences themselves. The MOZART-4 mechanism and the Reduced Hydrocarbon
are in close agreement in their representation of ozone throughout the
troposphere during all time periods (annual, seasonal, and diurnal). While
the Super-Fast mechanism tends to have higher simulated ozone variability and
differs from the MOZART-4 mechanism over regions of high biogenic emissions,
it is surprisingly capable of simulating ozone adequately given its
simplicity. We explore the trade-offs between chemical mechanism complexity
and computational cost by identifying regions where the simpler mechanisms
are comparable to the MOZART-4 mechanism and regions where they are not. The
Super-Fast mechanism is 3 times as fast as the MOZART-4 mechanism, which
allows for longer simulations or ensembles with more members that may not be
feasible with the MOZART-4 mechanism given limited computational resources.</p
Correction: Responses of deposition and bioaccumulation in the Great Lakes region to policy and other large-scale drivers of mercury emissions
Correction for ‘Responses of deposition and bioaccumulation in the Great Lakes region to policy and other large-scale drivers of mercury emissions’ by J. A. Perlinger et al., Environ. Sci.: Processes Impacts, 2018, 20, 195–209.
In the original article, there were errors in some numerical values in Table 3 and in the text in Sections 3.1 and 4.1. The corrected Table and Sections are shown below. The changes are to the magnitudes of mercury species deposition to the Great Lakes region, the Upper Peninsula of Michigan, and the Adirondack region of the Lakes basin. The changes to the Adirondack values reduce the numerical differences in these magnitudes compared to magnitudes of total mercury deposition to the Upper Peninsula of Michigan. The changes to the mercury species deposition to the Great Lakes region and the Upper Peninsula of Michigan have no implications. The changes do not impact the conclusions of the article
Understanding mercury oxidation and air–snow exchange on the East Antarctic Plateau: a modeling study
Distinct diurnal and seasonal variations of mercury (Hg) have been observed
in near-surface air at Concordia Station on the East Antarctic Plateau, but
the processes controlling these characteristics are not well understood.
Here, we use a box model to interpret the Hg0 (gaseous elemental
mercury) measurements in thes year 2013. The model includes atmospheric Hg0
oxidation (by OH, O3, or bromine), surface snow HgII (oxidized
mercury) reduction, and air–snow exchange, and is driven by meteorological
fields from a regional climate model. The simulations suggest that a
photochemically driven mercury diurnal cycle occurs at the air–snow interface
in austral summer. The fast oxidation of Hg0 in summer may be provided
by a two-step bromine-initiated scheme, which is favored by low temperature
and high nitrogen oxides at Concordia. The summertime diurnal variations of
Hg0 (peaking during daytime) may be confined within several tens of
meters above the snow surface and affected by changing mixed layer depths.
Snow re-emission of Hg0 is mainly driven by photoreduction of snow
HgII in summer. Intermittent warming events and a hypothesized reduction
of HgII occurring in snow in the dark may be important processes
controlling the mercury variations in the non-summer period, although their
relative importance is uncertain. The Br-initiated oxidation of Hg0 is
expected to be slower at Summit Station in Greenland than at Concordia (due to their
difference in temperature and levels of nitrogen oxides and ozone), which may
contribute to the observed differences in the summertime diurnal variations
of Hg0 between these two polar inland stations.</p
Global Health and Economic Impacts of Future Ozone Pollution
Abstract and PDF report are also available on the MIT Joint Program on the Science and Policy of Global Change website (http://globalchange.mit.edu/).We assess the human health and economic impacts of projected 2000-2050 changes in ozone pollution using the MIT Emissions Prediction and Policy Analysis-Health Effects (EPPA-HE) model, in combination with results from the GEOS-Chem global tropospheric chemistry model that simulated climate and chemistry effects of IPCC SRES emissions. We use EPPA to assess the human health damages (including acute mortality and morbidity outcomes) caused by ozone pollution and quantify their economic impacts in sixteen world regions. We compare the costs of ozone pollution under scenarios with 2000 and 2050 ozone precursor and greenhouse gas emissions (SRES A1B scenario). We estimate that health costs due to global ozone pollution above pre-industrial levels by 2050 will be ) and that acute mortalities will exceed 2 million. We find that previous methodologies underestimate costs of air pollution by more than a third because they do not take into account the long-term, compounding effects of health costs. The economic effects of emissions changes far exceed the influence of climate alone.United States Department of Energy, Office of
Science (BER) grants DE-FG02-94ER61937 and DE-FG02-93ER61677, the United States
Environmental Protection Agency grant EPA-XA-83344601-0, and the industrial and foundation
sponsors of the MIT Joint Program on the Science and Policy of Global Change
- …