Proposal of a methodology for implementing a service-oriented architecture in distributed manufacturing systems

As envisioned by Intelligent Manufacturing Systems (IMS), Next Generation Manufacturing Systems (NGMS) will satisfy the needs of an increasingly fast-paced and demanding market by dynamically integrating systems from inside and outside the manufacturing firm itself into a so-called extended enterprise. However, organizing these systems to ensure the maximum flexibility and interoperability with those from other organizations is difficult. Additionally, a defect in the system would have a great impact: it would affect not only its owner, but also its partners. For these reasons, we argue that a service-oriented architecture (SOA) would be a good candidate. It should be designed following a methodology where services play a central role, instead of being an implementation detail. In order for the architecture to be reliable enough as a whole, the methodology will need to help find errors before they arise in a production environment. In this paper we propose using SOA-specific testing techniques, compare some of the existing methodologies and outline several extensions upon one of them to integrate testing techniques

Variable cavity volume tooling for high-performance resin infusion moulding

This article describes the research carried out by Warwick under the BAE Systems/EPSRC programme ‘Flapless Aerial Vehicles Integrated Interdisciplinary Research – FLAVIIR’. Warwick's aim in FLAVIIR was to develop low-cost innovative tooling technologies to enable the affordable manufacture of complex composite aerospace structures and to help realize the aim of the Grand Challenge of maintenance-free, low-cost unmanned aerial vehicle manufacture. This article focuses on the evaluation of a novel tooling process (variable cavity tooling) to enable the complete infusion of resin throughout non-crimp fabric within a mould cavity under low (0.1 MPa) injection pressure. The contribution of the primary processing parameters to the mechanical properties of a carbon composite component (bulk-head lug section), and the interactions between parameters, was determined. The initial mould gap (di) was identified as having the most significant effect on all measured mechanical properties, but complex interactions between di, n (number of fabric layers), and vc (mould closure rate) were observed. The process capability was low due to the manual processing, but was improved through process optimization, and delivered properties comparable to high-pressure resin transfer moulding

Identification of the mitochondrial receptor complex in Saccharomyces cerevisiae

Mitochondrial protein import involves the recognition of preproteins by receptors and their subsequent translocation across the outer membrane. In Neurospora crassa, the two import receptors, MOM19 and MOM72, were found in a complex with the general insertion protein, GIP (formed by MOM7, MOM8, MOM30 and MOM38) and MOM22. We isolated a complex out of S. cerevisiae mitochondria consisting of MOM38/ISP42, the receptor MOM72, and five new yeast proteins, the putative equivalents of N. crassa MOM7, MOM8, MOM19, MOM22 and MOM30. A receptor complex isolated out of yeast cells transformed with N. crassa MOM19 contained the N. crassa master receptor in addition to the yeast proteins. This demonstrates that the yeast complex is functional, and provides strong evidence that we also have identified the yeast MOM19

A technical evaluation, performance analysis and risk assessment of multiple novel oxy-turbine power cycles with complete CO2 capture

In recent years there has been growing concern about greenhouse gas emissions (particularly CO2 emissions) and global warming. Oxyfuel combustion is one of the key technologies for tackling CO2 emissions in the power industry and reducing their contribution to global warming. The technology involves burning fuel with high-purity oxygen to generate mainly CO2 and steam, enabling easy CO2 separation from the flue gases by steam condensation. In fact, 100% CO2 capture and near-zero NOx emissions can be achieved with this technology. This study examines nineteen different oxy-turbine cycles, identifying the main parameters regarding their operation and development. It also analyses the use of advanced natural gas (NG) combustion cycles from the point of view of the carbon capture and storage (CCS) and considering political, legislative and social aspects of deploying this technology. Six oxy-turbine cycles which are at the most advanced stages of development (NetPower, Clean Energy Systems CES), Modified Graz, E-MATIANT, Advanced Zero Emission Power AZEP 100% and Semi-Closed Oxy-fuel Combustion Combined Cycle (SCOC-CC)), were chosen to conduct a Political, Environmental, Social, Technological, Legislative and Economic (PESTLE) risk analysis. This compares each technology with a conventional combined cycle gas turbine (CCGT) power plant without carbon capture as the base-case scenario. Overall, the net efficiency of the different oxy-turbine cycles ranges between 43.6% and 65%, comparable to a CCGT power plant, while providing the extra benefits of CO2 capture and lower emissions. A multi-criteria analysis carried out using DECERNS (Decision Evaluation in Complex Risk Network Systems) software determined that, depending on the specific criterion considered, one can draw different conclusions. However, in terms of technology, environment and social opinion, the most promising cycles are the NetPower and CES cycles, whereas from an economic point of view, E-MATIANT is more competitive in the energy market. Giving each factor equal importance, the NetPower cycle must be considered to be the best oxy-turbine cycle based on our analysis. Most of the oxy-turbine cycles are still under development and only a few cycles (e.g., CES and NetPower) are progressing to the demonstration phase. In consequence, political measures such as CO2 tax and emission allowances need to be implemented for oxy-turbine technologies to become the preferred option for fossil fuel power plants burning natural gas

Lessons from the operation of the "Penning-Fluorescent" TPC and prospects

We have recently reported the development of a new type of high-pressure Xenon time projection chamber operated with an ultra-low diffusion mixture and that simultaneously displays Penning effect and fluorescence in the near-visible region (300 nm). The concept, dubbed `Penning-Fluorescent' TPC, allows the simultaneous reconstruction of primary charge and scintillation with high topological and calorimetric fidelity

Situation, challenges, and SEOM recommendations for the future of undergraduate education in Oncology in Spain

Purpose The Spanish Society of Medical Oncology (SEOM, for its Spanish acronym) would like to attest to the relevance of training in Oncology as part of the undergraduate education in Medicine program and issue recommendations to improve said training, with the aim of responding better to the challenges that cancer poses to our society. Materials and methods The curricula of 42 schools of medicine were reviewed with interviews with at least one teaching medical oncologist from each faculty. The qualitative and opinion analysis was completed by means of an online questionnaire targeting lecturers, resident tutors, and residents in Medical Oncology (MO), enabling the detection of needs and areas for improvement at an organizational level and in terms of skill acquisition. Results While the number of medical schools with a specific, mandatory program in MO has grown by up to 90%, it has not been accompanied by an increase in independent programs. Instead, they largely consist of programs shared with other specialties (61% of the medical faculties). In most of the undergraduate education programs, Oncology contents are fragmented and approached from the perspective of each organ system. Conclusions Despite the positive evolution in recent years, the heterogeneity in Oncology contents during undergraduate education training continues to be remarkable. Cross-sectional programs with an integral vision, taught in the final years of undergraduate medical education would be desirable. Among the recommendations for improvement of training in Medical Oncology, the SEOM proposes that updated, theoretical content be incorporated and clinical practice in Medical Oncology departments be promotedThis study was funded as an unrestricted grant by Jansse