performance analysis of a solar only gas micro turbine with mass flow control

Abstract Micro gas turbine applications in concentrating solar field systems is already on industrial stage. The peculiarity of these systems is the possibility to use fossil fuels when solar power source is lacking. It is preferable that the system works in solar-only mode for long time; however, owing to the efficiency loss which occur for low radiation levels, a fuel integration is necessary. This work presents a system which allows to operate with constant efficiency, without the use of fuel for over one fifth of the nominal power rate. It is based on a regenerated micro gas turbine in closed loop configuration. The proposed system includes the solar tower, the heliostats field, the regenerator and a low temperature heat exchanger which cools the working fluid. Finally, two more devices, for the actuation of the proposed control are included: an auxiliary compressor and a bleed valve. The use of air as working fluid has been analyzed, with different values of the base cycle pressure (inlet pressure of the main compressor), which are needed for varying the mass flow flowing in the system. The control of the mass flow rate is mandatory to regulate the gas turbine power, by keeping almost constant the maximum temperature of the thermodynamic cycle when the incident solar radiation changes. In particular, the auxiliary compressor admits fresh air in the cycle when the thermal power received by the sun increases, while the bleed valve discharges it in the atmosphere, when the thermal power decreases. Therefore, the thermodynamic cycle is unchanged and guarantees constant net system efficiency for all the operations conditions. Particular attention is given to the receiver thermal incident flux, heliostat field and solar tower design. The current results are compared with the annual efficiency and energy production of an existing plant in hybrid configuration (solar-fuel).The analysis has been carried out on a commercial gas turbine having a power of 100 kW, sited on Seville town. For the heliostat field analysis, the open source code Solar PILOT has been used, while for the entire plant the code Thermoflex has been employed

procedure selecting pumps running as turbines in micro hydro plants

Abstract The authors present a combined method using statistical and numerical models for selecting a pump running as turbine in micro hydro plants. The data of the site (head and capacity) allow calculating two coefficients, C Q and C H , which identify the pump to use successfully as turbine in that place. A one dimensional model, starting from data available on the pumps manufacturers catalogues, reconstructs a virtual geometry of the PAT, then calculates the performances curves, head vs. capacity, efficiency vs. capacity. The procedure has been applied with the aim to select a PAT recovering energy from a pipeline whose characteristic curve is known

An Externally Fired Micro Combined-Cycle, with Largely Adjustable Steam Turbine, in a CHP System

n/

Optimization of Heliostat Field in a Thermal Solar Power Plant with an Unfired Closed Joule-Brayton Cycle

Abstract In the last decades, concentrating solar power (CSP) has been gaining increasing attention as a sustainable technology for producing electricity. Nowadays, in the world, 483.6 MWs are produced by CSP plants of which 457 MW are already in commercial stage, whereas the other 430 MWs are under construction. In this paper, a solar tower with an unfired closed Joule-Brayton cycle of 10 MW peak power, located in Seville, is analyzed. The cycle, that employs only atmospheric air, without fuel consumption, relies on the possibility to vary the mean density of the air flowing in the plant. By using an auxiliary compressor and a bleed valve, a variable mass flow rate can be obtained so to keep the temperature at turbine inlet constant. On the other hand, in the concentrated solar plant, the number of installed heliostats can reflect towards the receiver the nominal thermal power, even with reduced values of the DNI. With the increase of the radiation, when the thermal energy flux achieves the limit tolerable by the receiver, a part of heliostats is defocused. On the contrary, in the presence of transients, due, for example, to clouds or in case of low solar radiation, the mirrors will be all, or in part, oriented towards the receiver face, so to keep constant the receiver outlet air temperature at the design value. Both the above mentioned control systems, without any fuel addition, act with the common goal of maintaining constant the air temperature at turbine inlet. However, they intervene at different times: at rated power, heliostats work, while the air flow rate is kept constant at the maximum value; when the nominal conditions are no longer achievable (the DNI values are insufficient), the adjustment is performed through the modulation of the pressure base control system, focusing the entire surface of the mirrors on the receiver. The analysis shows how the interaction between these systems influences the number and size of heliostats to be installed in the solar field. The study of the state of art has demonstrated that, in tower systems currently in operation, without storage, a solar multiple of 1.3 is generally used; our contribution shows how, with the air density control system, this value may be reduced, with consequent benefit on the heliostats cost. The numerical tests have been carried out by using the WINDELSOL software to optimize the heliostat field configuration and the THERMOFLOW, for the thermodynamic analysis

Computational Fluid Dynamic Analysis of the External Rotor Supporting the Design of a Tidal Kinetic Turbine Prototype

The purpose of this paper is to ascertain the reliability of a zero-dimensional approach, aimed to design a double rotor kinetic turbine prototype, by means of computational fluid dynamic analysis. The interaction between the flow and the blade of the turbine prototype external rotor is evaluated. The calculation is carried out by a three-dimensional analysis using the commercial code FLUENT 15.0. In the present work, the Reynolds Averaged Navier-Stokes approach is used, with the two-equation Realizable k-epsilon turbulence model. The blades profile is a NACA 4412 interacting with flow at an attack angle of 4°, which is kept constant along the blade height. The estimation of the forces acting on the blades allows a more accurate evaluation of the blade lift coefficient, which is useful to design the blades geometry and to compute the power coefficient, previously estimated by the traditional mono-dimensional approach

Identification and developmental expression of the full complement of Cytochrome P450 genes in Zebrafish

© The Authors, 2010. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in BMC Genomics 11 (2010): 643, doi:10.1186/1471-2164-11-643.Increasing use of zebrafish in drug discovery and mechanistic toxicology demands knowledge of cytochrome P450 (CYP) gene regulation and function. CYP enzymes catalyze oxidative transformation leading to activation or inactivation of many endogenous and exogenous chemicals, with consequences for normal physiology and disease processes. Many CYPs potentially have roles in developmental specification, and many chemicals that cause developmental abnormalities are substrates for CYPs. Here we identify and annotate the full suite of CYP genes in zebrafish, compare these to the human CYP gene complement, and determine the expression of CYP genes during normal development. Zebrafish have a total of 94 CYP genes, distributed among 18 gene families found also in mammals. There are 32 genes in CYP families 5 to 51, most of which are direct orthologs of human CYPs that are involved in endogenous functions including synthesis or inactivation of regulatory molecules. The high degree of sequence similarity suggests conservation of enzyme activities for these CYPs, confirmed in reports for some steroidogenic enzymes (e.g. CYP19, aromatase; CYP11A, P450scc; CYP17, steroid 17a-hydroxylase), and the CYP26 retinoic acid hydroxylases. Complexity is much greater in gene families 1, 2, and 3, which include CYPs prominent in metabolism of drugs and pollutants, as well as of endogenous substrates. There are orthologous relationships for some CYP1 s and some CYP3 s between zebrafish and human. In contrast, zebrafish have 47 CYP2 genes, compared to 16 in human, with only two (CYP2R1 and CYP2U1) recognized as orthologous based on sequence. Analysis of shared synteny identified CYP2 gene clusters evolutionarily related to mammalian CYP2 s, as well as unique clusters. Transcript profiling by microarray and quantitative PCR revealed that the majority of zebrafish CYP genes are expressed in embryos, with waves of expression of different sets of genes over the course of development. Transcripts of some CYP occur also in oocytes. The results provide a foundation for the use of zebrafish as a model in toxicological, pharmacological and chemical disease research.This work was supported by NIH grants R01ES015912 and P42ES007381 (Superfund Basic Research Program at Boston University) (to JJS). MEJ was a Guest Investigator at the Woods Hole Oceanographic Institution (WHOI) and was supported by grants from the Swedish research council Formas and Carl Trygger's foundation. AK was a Post-doctoral Fellow at WHOI, and was supported by a fellowship from the Japanese Society for Promotion of Science (JSPS). JZ and TP were Guest Students at the WHOI and were supported by a CAPES Ph.D. Fellowship and CNPq Ph.D. Sandwich Fellowship (JZ), and by a CNPq Ph.D. Fellowship (TP), from Brazil

Performance analysis of a solar-only gas micro turbine, with mass flow control

Abstract Micro gas turbine applications in concentrating solar field systems is already on industrial stage. The peculiarity of these systems is the possibility to use fossil fuels when solar power source is lacking. It is preferable that the system works in solar-only mode for long time; however, owing to the efficiency loss which occur for low radiation levels, a fuel integration is necessary. This work presents a system which allows to operate with constant efficiency, without the use of fuel for over one fifth of the nominal power rate. It is based on a regenerated micro gas turbine in closed loop configuration. The proposed system includes the solar tower, the heliostats field, the regenerator and a low temperature heat exchanger which cools the working fluid. Finally, two more devices, for the actuation of the proposed control are included: an auxiliary compressor and a bleed valve. The use of air as working fluid has been analyzed, with different values of the base cycle pressure (inlet pressure of the main compressor), which are needed for varying the mass flow flowing in the system. The control of the mass flow rate is mandatory to regulate the gas turbine power, by keeping almost constant the maximum temperature of the thermodynamic cycle when the incident solar radiation changes. In particular, the auxiliary compressor admits fresh air in the cycle when the thermal power received by the sun increases, while the bleed valve discharges it in the atmosphere, when the thermal power decreases. Therefore, the thermodynamic cycle is unchanged and guarantees constant net system efficiency for all the operations conditions. Particular attention is given to the receiver thermal incident flux, heliostat field and solar tower design. The current results are compared with the annual efficiency and energy production of an existing plant in hybrid configuration (solar-fuel).The analysis has been carried out on a commercial gas turbine having a power of 100 kW, sited on Seville town. For the heliostat field analysis, the open source code Solar PILOT has been used, while for the entire plant the code Thermoflex has been employed