334 research outputs found
Monte Carlo event generator validation and tuning for the LHC
We summarise the motivation for, and the status of, the tools developed by
CEDAR/MCnet for validating and tuning Monte Carlo event generators for the LHC
against data from previous colliders. We then present selected preliminary
results from studies of event shapes and hadronisation observables from e+e-
colliders, and of minimum bias and underlying event observables from the
Tevatron, and comment on the approach needed with early LHC data to best
exploit the potential for new physics discoveries at the LHC in the next few
years.Comment: Prepared for Proceedings of XII Advanced Computing and Analysis
Techniques in Physics Research, November 3-7 2008, Erice, Ital
New developments in event generator tuning techniques
Data analyses in hadron collider physics depend on background simulations
performed by Monte Carlo (MC) event generators. However, calculational
limitations and non-perturbative effects require approximate models with
adjustable parameters. In fact, we need to simultaneously tune many
phenomenological parameters in a high-dimensional parameter-space in order to
make the MC generator predictions fit the data. It is desirable to achieve this
goal without spending too much time or computing resources iterating parameter
settings and comparing the same set of plots over and over again. We present
extensions and improvements to the MC tuning system, Professor, which addresses
the aforementioned problems by constructing a fast analytic model of a MC
generator which can then be easily fitted to data. Using this procedure it is
for the first time possible to get a robust estimate of the uncertainty of
generator tunings. Furthermore, we can use these uncertainty estimates to study
the effect of new (pseudo-) data on the quality of tunings and therefore decide
if a measurement is worthwhile in the prospect of generator tuning. The
potential of the Professor method outside the MC tuning area is presented as
well.Comment: To appear in the proceedings of the 13th International Workshop on
Advanced Computing and Analysis Techniques in Physics Research, ACAT2010,
Jaipur, India, February 22-27, 201
Usability in digitalen Kooperationsnetzwerken. Nutzertests und Logfile-Analyse als kombinierte Methode
Usability is a key factor when developing new applications. The interaction between the users and the application should be efficient, effective and engaging. Furthermore, a good usability includes a high error tolerance and an good learnability. Different methods allow the measurement of usability throughout the development (process). All methods have in common that the different employed steps like planning, conducting and evaluating are rather time-consuming. When end-users are included as subjects, usability tests are employed. Due to the high time-effort, usually ten or less tests are conducted. The thesis tries to solve this point by trying to combine usability tests and logfile analysis. The empirical work is two-folded. First, usability tests within a learning management system (LMS) are logged in the background. These logfiles are assigned to severe usability problems. Second, the paths of the severe usability problems are combined with logfile data from a real-world LMS that runs the same application. The real-world logfiles contain a period of about 300 days with 133 active users. Prior to the combination, both data sets converted into a similar format. Being a new procedure, the definite similarity value had to be specified by descriptive statistics and visual inspections. The final combination makes it possible to determine the severity of usability problems on the basis of real-world usage data. The proposed method offers a more precise overview of the occurrence of the found usability problems, independent of the test situation. This thesis provides additional value to the fields of (Web) Data Mining, Usability and Human-Computer Interaction (HCI). It also offers additional knowledge to the field of software development, quantitative and quantitative research as well as computer-supported cooperative work (CSCW) and learning management systems (LMS)
Innovation in the European chemical industry
Firms in the European chemical industry have been among the most successful firms world wide. However, they have had to undertake severe restucturing in order to maintain their market position. These efforts focused in particular on strengthening their innovative capability as product and process innovation have become the most decisive factors in global competition. In order to improve the innovative conditions, the European Commission has supported the Community Innovation Survey (CIS). 1992/1993 was the first time that large-scale harmonised innovation surveys were carried out in all Member States of the European Union. This study uses the CIS micro data from nearly 2000 European chemical firms. This study focuses on the identification of innovative trends within the chemical industry between 1984 and 1993. Using data from annual reports of nine selected European stock companies, the study identifies those areas of the chemical industry currently having the highest innovative potential. Three speciality categories are identified as having the highest number of innovations during this ten year period: chemicals, paints/varnishes, and plastics. -- Obwohl viele europäische Unternehmen der chemischen Industrie in den vergangenen Jahrzehnten zu den erfolgreichsten in der Welt zählten, mußten sie sich Anfang der neunziger Jahre einem gravierenden Strukturwandel unterziehen, um ihre Position behaupten zu können. Die Fähigkeit der Unternehmen, Innovationen hervorzubringen, stand und steht dabei im Mittelpunkt. Mit dem Ziel, die Rahmenbedingungen für Innovationen zu verbessern, führte die EU-Kommission 1993 eine europaweite Innovationserhebung, den Community Innovation Survey (CIS) durch. In dieser Studie wurden die anonymisierten Antworten von nahezu 2000 Unternehmen der chemischen Industrie analysiert. Um Innovationstrends aufzuzeigen zu können, wurden darüber hinaus Geschäftsberichte von neun großen europäischen Chemieunternehmen ausgewertet. So wurden die Sparten Spezialitäten, Farben/Lacke und Kunststoffe als diejenigen Sparten identifiziert, die im Untersuchungszeitraum (1984-1993) die meisten Innovationen aufwiesen.
How to make a 'Soziologiemagazin'
Obgleich sie das Rückgrat moderner wissenschaftlicher Kommunikation sind, werden jene Prozesse kaum wahrgenommen, die zur Entstehung einer wissenschaftlichen Fachzeitschrift beitragen. Im folgenden Beitrag soll anhand des Soziologiemagazins auf die redaktionellen Prozesse eingegangen werden, die hinter einer solchen Veröffentlichung stehen. Somit soll ein Bewusstsein für die meist unsichtbare Arbeit einer Zeitschriftenredaktion geschaffen werden und dadurch ganz im Sinne der Public Sociology belichtet werden, wie wissenschaftliche Erkenntnisse öffentlich verbreitet werden
Microbiological Characteristics and Surgical Management of Animal-Bite-Related Oral & Maxillofacial Injuries: A Single Center's Experience
The objective of the current study is to retrospectively evaluate animal-bite injuries and to gain insight into the epidemiology, accident consequences and treatment concept of these accidents in oral and maxillofacial surgery. Data of patients, who were admitted January 2015 and April 2021, were retrospectively evaluated regarding the patients' characteristics (age, gender), facial distribution of substance defects/partial amputations, duration of hospitalization, operation treatments and antibiotic treatments. Data of 75 patients were included. Patients were bitten by dogs (n = 69.92%), cats (n = 4) and horses (n = 2). Lower eyelid/cheek complex was the most affected region (n = 37, 32.74%). Most of the patients between 0 and 3 years had to be operated on under general anesthesia (p = 0.011), while most of the adults could be operated on under local anesthesia (p = 0.007). In the age group 0-12 years, 30 patients (68%) were operated on under general anesthesia. Ampicillin/Sulbactam (48%) was the antibiotic most used. Antibiotics were adjusted after wound swabs in case of wound infections or critical wound conditions. This means that resistant antibiotics were stopped, and sensitive antibiotics were used. Structured surgical and antibiotic management of animal-bite wounds in the maxillofacial region is the most important factor for medical care to avoid long-term aesthetic consequences. Public health actions and policies under the leadership of an interdisciplinary committee could improve primary wound management, healing outcome and information status in the general population
Systematic event generator tuning for the LHC
In this article we describe Professor, a new program for tuning model
parameters of Monte Carlo event generators to experimental data by
parameterising the per-bin generator response to parameter variations and
numerically optimising the parameterised behaviour. Simulated experimental
analysis data is obtained using the Rivet analysis toolkit. This paper presents
the Professor procedure and implementation, illustrated with the application of
the method to tunes of the Pythia 6 event generator to data from the LEP/SLD
and Tevatron experiments. These tunes are substantial improvements on existing
standard choices, and are recommended as base tunes for LHC experiments, to be
themselves systematically improved upon when early LHC data is available.Comment: 28 pages. Submitted to European Physical Journal C. Program sources
and extra information are available from
http://projects.hepforge.org/professor
A Promotores de Salud Intervention to Reduce Cardiovascular Disease Risk in a High-Risk Hispanic Border Population, 2005-2008
Introduction: The high prevalence of cardiovascular disease (CVD) in the Hispanic population of the United States, together with low rates of health insurance coverage, suggest a potential cardiovascular health crisis. The objective of Project HEART (Health Education Awareness Research Team) was to promote behavior changes to decrease CVD risk factors in a high-risk Hispanic border population. Methods: Project HEART took place from 2005 through 2008 as a randomized community trial with a community-based participatory research framework using promotores de salud (community health workers). A total of 328 participants with at least 1 CVD risk factor were selected by randomizing 10 US Census tracts in El Paso, Texas, to either the experimental or the control group. The experimental group (n = 192) was assigned to a series of 8 health classes using the Su Corazón, Su Vida curriculum. After 2 months of educational sessions, the group was followed for 2 months. The control group (n = 136) was given basic educational materials at baseline, and no other intervention was used. Main outcomes of interest included changes in health behaviors and clinical measures. Results: Participants in the experimental group showed more awareness of CVD risk factors, more confidence in the control of these factors, and improved dietary habits (ie, lower salt and cholesterol intake, better weight control practices) compared with the control group. Total cholesterol was 3% lower in the experimental than in the control participants, and non-high-density lipoprotein cholesterol and low-density lipoprotein cholesterol were both 5% lower. Conclusion: The HEART trial suggests that community health education using promotores de salud is a viable strategy for CVD risk reduction in a Hispanic border community
Evaluating the Urban Canopy Scheme TERRA_URB in the COSMO Model for Selected European Cities
The increase in built surfaces constitutes the main reason for the formation of the Urban Heat Island (UHI), that is a metropolitan area significantly warmer than its surrounding rural areas. The urban heat islands and other urban-induced climate feedbacks may amplify heat stress and urban flooding under climate change and therefore to predict them correctly has become essential. Currently in the COSMO model, cities are represented by natural land surfaces with an increased surface roughness length and a reduced vegetation cover, but this approach is unable to correctly reproduce the UHI effect. By increasing the model resolution, a representation of the main physical processes that characterize the urban local meteorology should be addressed, in order to better forecast temperature, moisture and precipitation in urban environments. Within the COSMO Consortium a bulk parameterization scheme (TERRA_URB or TU) has been developed. It parametrizes the effects of buildings, streets and other man-made impervious surfaces on energy, moist and momentum exchanges between the surface and atmosphere, and additionally accounts for the anthropogenic heat flux as a heat source from the surface to the atmosphere. TU implements an impervious water-storage parameterization, and the Semi-empirical Urban canopy parametrization (SURY) that translates 3D urban canopy into bulk parameters. This paper presents evaluation results of the TU scheme in high-resolution simulations with a recent COSMO model version for selected European cities, namely Turin, Naples and Moscow. The key conclusion of the work is that the TU scheme in the COSMO model reasonably reproduces UHI effect and improves air temperature forecasts for all the investigated urban areas, despite each city has very different morphological characteristics. Our results highlight potential benefits of a new turbulence scheme and the representation of skin-layer temperature (for vegetation) in the model performance. Our model framework provides perspectives for enhancing urban climate modelling, although further investigations in improving model parametrizations, calibration and the use of more realistic urban canopy parameters are needed
- …