Cryogenic Mechanical Alloying of Poly (ether ether ketone) - Polycarbonate Composite Powders for Selective Laser Sintering

Mechanical alloying is a solid state processing technique traditionally used in the metallurgical industry to extend solubility limits in alloy systems. Mechanical alloying can also be used to blend polymer systems at ambient or cryogenic temperatures. In this work, cryogenic mechanical alloying was employed to create composite powders of Poly (ether ether ketone) (PEEK) - Polycarbonate (PC) for use in selective laser sintering applications. The microstructural development of the PEEK-PC system that occurs during laser sintering and the effects of this microstructure on mechanical properties of the laser sintered parts was investigated.Mechanical Engineerin

Combustion of coal gas fuels in a staged combustor

Gaseous fuels produced from coal resources generally have heating values much lower than natural gas; the low heating value could result in unstable or inefficient combustion. Coal gas fuels may contain ammonia which if oxidized in an uncontrolled manner could result in unacceptable nitrogen oxide exhaust emission levels. Previous investigations indicate that staged, rich-lean combustion represents a desirable approach to achieve stable, efficient, low nitrogen oxide emission operation for coal-derived liquid fuels contaning up to 0.8-wt pct nitrogen. An experimental program was conducted to determine whether this fuel tolerance can be extended to include coal-derived gaseous fuels. The results of tests with three nitrogen-free fuels having heating values of 100, 250, and 350 Btu/scf and a 250 Btu/scf heating value doped to contain 0.7 pct ammonia are presented

Advancing-side directivity and retreating-side interactions of model rotor blade-vortex interaction noise

Acoustic data are presented from a 40 percent scale model of the four-bladed BO-105 helicopter main rotor, tested in a large aerodynamic wind tunnel. Rotor blade-vortex interaction (BVI) noise data in the low-speed flight range were acquired using a traversing in-flow microphone array. Acoustic results presented are used to assess the acoustic far field of BVI noise, to map the directivity and temporal characteristics of BVI impulsive noise, and to show the existence of retreating-side BVI signals. The characterics of the acoustic radiation patterns, which can often be strongly focused, are found to be very dependent on rotor operating condition. The acoustic signals exhibit multiple blade-vortex interactions per blade with broad impulsive content at lower speeds, while at higher speeds, they exhibit fewer interactions per blade, with much sharper, higher amplitude acoustic signals. Moderate-amplitude BVI acoustic signals measured under the aft retreating quadrant of the rotor are shown to originate from the retreating side of the rotor

Deployable antenna demonstration project

Test program options are described for large lightweight deployable antennas for space communications, radar and radiometry systems

Domain structure of epitaxial Co films with perpendicular anisotropy

Epitaxial hcp Cobalt films with pronounced c-axis texture have been prepared by pulsed lased deposition (PLD) either directly onto Al2O3 (0001) single crystal substrates or with an intermediate Ruthenium buffer layer. The crystal structure and epitaxial growth relation was studied by XRD, pole figure measurements and reciprocal space mapping. Detailed VSM analysis shows that the perpendicular anisotropy of these highly textured Co films reaches the magnetocrystalline anisotropy of hcp-Co single crystal material. Films were prepared with thickness t of 20 nm < t < 100 nm to study the crossover from in-plane magnetization to out-of-plane magnetization in detail. The analysis of the periodic domain pattern observed by magnetic force microscopy allows to determine the critical minimum thickness below which the domains adopt a pure in-plane orientation. Above the critical thickness the width of the stripe domains is evaluated as a function of the film thickness and compared with domain theory. Especially the discrepancies at smallest film thicknesses show that the system is in an intermediate state between in-plane and out-of-plane domains, which is not described by existing analytical domain models

Wake Geometry Effects on Rotor Blade-Vortex Interaction Noise Directivity

Acoustic measurements from a model rotor wind tunnel test are presented which show that the directionality of rotor blade vortex interaction (BVI) noise is strongly dependent on the rotor advance ratio and disk attitude. A rotor free wake analysis is used to show that the general locus of interactions on the rotor disk is also strongly dependent on advance ratio and disk attitude. A comparison of the changing directionality of the BVI noise with changes in the interaction locations shows that the strongest noise radiation occurs in the direction of motion normal to the blade span at the time of interaction, for both advancing and retreating side BVI. For advancing side interactions, the BVI radiation angle down from the tip-path plane appears relatively insensitive to rotor operating condition and is typically between 40 and 55 deg below the disk. However, the azimuthal radiation direction shows a clear trend with descent speed, moving towards the right of the flight path with increasing descent speed. The movement of the strongest radiation direction is attributed to the movement of the interaction locations on the rotor disk with increasing descent speed

Measurement and Calculation of Absolute Single and Multiple Charge Exchange Cross Sections for Fe^(q+) Ions Impacting H_2O

Charge exchange (CE) plays a fundamental role in the collisions of solar- and stellar-wind ions with lunar and planetary exospheres, comets, and circumstellar clouds. Reported herein are absolute cross sections for single, double, triple, and quadruple CE of Fe^(q+) (q = 5-13) ions with H_2O at a collision energy of 7q keV. One measured value of the pentuple CE is also given for Fe^(9+) ions. An electron cyclotron resonance ion source is used to provide currents of the highly charged Fe ions. Absolute data are derived from knowledge of the target gas pressure, target path length, and incident and charge-exchanged ion currents. Experimental cross sections are compared with new results of the n-electron classical trajectory Monte Carlo approximation. The radiative and non-radiative cascades following electron transfers are approximated using scaled hydrogenic transition probabilities and scaled Auger rates. Also given are estimates of cross sections for single capture, and multiple capture followed by autoionization, as derived from the extended overbarrier model. These estimates are based on new theoretical calculations of the vertical ionization potentials of H_2O up to H_2O^(10+)

Plant community structure mediates potential methane production and potential iron reduction in wetland mesocosms.

Abstract Wetlands are the largest natural source of methane to the atmosphere, but factors controlling methane emissions from wetlands are a major source of uncertainty in greenhouse gas budgets and projections of future climate change. We conducted a controlled outdoor mesocosm experiment to assess the effects of plant community structure (functional group richness and composition) on potential methane production and potential iron reduction in freshwater emergent marshes. Four plant functional groups (facultative annuals, obligate annuals, reeds, and tussocks) were arranged in a full-factorial design and additional mesocosms were assigned as no-plant controls. Soil samples from the top 10 cm were collected three times during the growing season to determine potential methane production and potential iron reduction (in unamended soils and in soils amended with 200 mM formate). These data were compared to soil organic matter, soil pH, and previously published data on above and belowground plant biomass. We found that functional group richness was less important than the presence of specific functional groups (reeds or tussocks) in mediating potential iron reduction. In our mesocosms, where oxidized iron was abundant and electron donors were limiting, iron reducing bacteria outcompeted methanogens, keeping methane production barely detectable in unamended lab incubations. When the possibility of re-oxidizing iron was eliminated via anaerobic incubations and the electron donor limitation was removed by adding formate, potential methane production increased and followed the same patterns as potential iron reduction. Our findings suggest that in the absence of abundant oxidized iron and/or the presence of abundant electron donors, wetlands dominated by either reeds or tussocks may have increased methane production compared to wetlands dominated by annuals. Depending on functional traits such as plant transport and rhizospheric oxygenation capacities, this could potentially lead to increased methane emissions in some wetlands. Additional research examining the role these plant functional groups play in other aspects of methane dynamics will be useful given the importance of methane as a greenhouse gas

Acoustic measurements from a rotor blade-vortex interaction noise experiment in the German-Dutch Wind Tunnel (DNW)

Acoustic data are presented from a 40 percent scale model of the 4-bladed BO-105 helicopter main rotor, measured in the large European aeroacoustic wind tunnel, the DNW. Rotor blade-vortex interaction (BVI) noise data in the low speed flight range were acquired using a traversing in-flow microphone array. The experimental apparatus, testing procedures, calibration results, and experimental objectives are fully described. A large representative set of averaged acoustic signals is presented