2,213 research outputs found
Controlling the elution order of insulin and its analogs in sub-/supercritical fluid chromatography using methanesulfonic acid and 18-crown-6 as mobile phase additives
The purity analysis of therapeutic peptides can often be challenging, demanding the application of more than a single analytical technique. Supercritical fluid chromatography nowadays is a promising alternative to reversed-phase liquid chromatography, providing orthogonal and complementary information. This study investigated its applicability for the separation of human insulin, its analogs and degradation products. A previously published method development protocol for peptides up to 2000 Da was successfully applied to the higher molecular weight insulins (6 kDa). A single gradient method was optimized for all insulins using a Torus DEA column (100 × 3.0 mm, 1.7 μm), carbon dioxide and a modifier consisting of methanol/acetonitrile/water/methanesulfonic acid (65:35:2:0.1, v/v/v/v). Consecutively, the crown ether 18-crown-6, which is well known to complex charged lysine sidechains and other amino functionalities, was added to the modifier to evaluate its impact on selectivity. A decreased retention and a shift in the elution order for the insulins were observed. An inverse effect on retention was found when combined with a neutral stationary phase chemistry (Viridis BEH)
Risk assessment for nitrosated pharmaceuticals: A future perspective in drug development
Since June 2018, thousands of drug products from around the world had to be recalled due to the unexpected presence of nitrosamines (NAs). Starting with the pharmaceutical group of sartans, antidiabetic drugs, antihistamines, and antibiotics also became the subject of investigation. The occurrence of NAs has shown that pharmaceutical companies and regulatory agencies did not focus on these substances in the past during drug development. In this study, we incorporated a nitrosation assay procedure into high-resolution supercritical fluid chromatography (SFC)–mass spectrometry screening to test the potential of direct nitrosation of active pharmaceutical ingredients (APIs). The forced degradation study was performed with a four-fold molar excess of sodium nitrite, relative to the drug substance, at pH 3–4 for 4 h at 37°C. Chromatographic separation was performed on a porous graphitic carbon column by SFC. The mass analysis then focused on direct N-nitrosation or N-nitroso compounds (NOCs) formed after dealkylation. Substances (n = 67) from various pharmaceutical classes were evaluated and 49.3% of them formed NOCs, of which 21.2% have not yet been reported in the literature. In addition, for two APIs, which are known to form an unidentified NOC, the structure could be identified. A few substances also showed multiple NOCs and even N,N’-dinitroso-species. As NAs are carcinogens, they have to be eliminated or at least limited to prevent cancer in patients, who rely on these drugs. This study contributes a procedure that can be implemented in preapproval drug development and postapproval risk assessment to prevent unexpected findings in the future
Ternary eluent compositions in supercritical fluid chromatography improved fingerprinting of therapeutic peptides
Currently, little information has been published on the application of ternary eluent compositions in supercritical fluid chromatography for separating peptides. This work investigates the benefits of adding acetonitrile to methanol as the modifier. Three cyclic antibiotic peptides (bacitracin, colistin, and daptomycin) ranging between 1000 and 2000 Da were chosen as model substances. The ternary mixture of carbon dioxide, methanol, and acetonitrile is optimized to increase the resolution of the peptide's fingerprint. In addition, varying compositions of methanol and acetonitrile were found to change the elution order of the analytes, which is a valuable tool during method development. An individual gradient method using two Torus 2-PIC columns (each 100 × 3.0 mm, 1.7 μm), carbon dioxide, and a modifier consisting of acetonitrile/methanol/water/methanesulfonic acid (60:40:2:0.1, v:v:v:v) was optimized for each of the peptides. Subsequently, a generic method development protocol applicable to polypeptides is proposed
Prevalence of nitrosamine contaminants in drug samples: Has the crisis been overcome?
Various drug samples (N = 249; drug substances, tablets, capsules, solutions, crèmes, and more) from the European pharmaceutical market were collected since 2019 and analyzed for 16 nitrosamines (NAs). In 2.0% of the cases, NAs were detected. These findings included four active pharmaceutical ingredients already known for potential NA contamination: losartan (N-nitrosodimethylamine [NDMA] and N-nitrosodiethylamine, simultaneously), valsartan (NDMA), metformin (NDMA) and ranitidine (NDMA). The fifth new finding, which has not been reported yet, discovered contamination of a molsidomine tablet sample with N-nitrosomorpholine (NMor). The tablet contained 144% of the toxicological allowable intake for NMor. NMor was included in our screening from the beginning and is currently the focus of regulatory authorities, but was added to the guidelines only last year. Thus, it may not have been the focus of regulatory investigations for too long. Our results indicate that the majority of drug products in the market are nonhazardous in terms of patient safety and drug purity. Unfortunately, the list of individual affected products keeps growing constantly and new NA cases, such as molsidomine or nitrosated drug substances (nitrosamine drug substance-related impurities [NDSRI]), continue to emerge. We therefore expect nitrosamine screenings to remain a high priority
Unprecedented chemical transformation: crystallographic evidence for 1,1,2,2-tetrahydroxyethane captured within an Fe6Dy3 single molecule magnet
A nonanuclear {Fe6Dy3} coordination cluster displaying SMM
behaviour in which an unprecedented chemical transformation
provides structural information for the existence of 1,1,2,2-tetrahydroxyethane
is reported
Recommended from our members
Intercomparison of biomass burning aerosol optical properties from in situ and remote-sensing instruments in ORACLES-2016
The total effect of aerosols, both directly and on cloud properties, remains the biggest source of uncertainty in anthropogenic radiative forcing on the climate. Correct characterization of intensive aerosol optical properties, particularly in conditions where absorbing aerosol is present, is a crucial factor in quantifying these effects. The southeast Atlantic Ocean (SEA), with seasonal biomass burning smoke plumes overlying and mixing with a persistent stratocumulus cloud deck, offers an excellent natural laboratory to make the observations necessary to understand the complexities of aerosol–cloud–radiation interactions. The first field deployment of the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) campaign was conducted in September of 2016 out of Walvis Bay, Namibia. Data collected during ORACLES-2016 are used to derive aerosol properties from an unprecedented number of simultaneous measurement techniques over this region. Here, we present results from six of the eight independent instruments or instrument combinations, all applied to measure or retrieve aerosol absorption and single-scattering albedo. Most but not all of the biomass burning aerosol was located in the free troposphere, in relative humidities typically ranging up to 60 %. We present the single-scattering albedo (SSA), absorbing and total aerosol optical depth (AAOD and AOD), and absorption, scattering, and extinction Ångström exponents (AAE, SAE, and EAE, respectively) for specific case studies looking at near-coincident and near-colocated measurements from multiple instruments, and SSAs for the broader campaign average over the month-long deployment. For the case studies, we find that SSA agrees within the measurement uncertainties between multiple instruments, though, over all cases, there is no strong correlation between values reported by one instrument and another. We also find that agreement between the instruments is more robust at higher aerosol loading (AOD400>0.4). The campaign-wide average and range shows differences in the values measured by each instrument. We find the ORACLES-2016 campaign-average SSA at 500 nm (SSA500) to be between 0.85 and 0.88, depending on the instrument considered (4STAR, AirMSPI, or in situ measurements), with the interquartile ranges for all instruments between 0.83 and 0.89. This is consistent with previous September values reported over the region (between 0.84 and 0.90 for SSA at 550nm). The results suggest that the differences observed in the campaign-average values may be dominated by instrument-specific spatial sampling differences and the natural physical variability in aerosol conditions over the SEA, rather than fundamental methodological differences.</p
Mechanically induced silyl ester cleavage under acidic conditions investigated by AFM-based single-molecule force spectroscopy in the force-ramp mode
AFM-based dynamic single-molecule force spectroscopy was used to stretch carboxymethylated amylose (CMA) polymers, which have been covalently tethered between a silanized glass substrate and a silanized AFM tip via acid-catalyzed ester condensation at pH 2.0. Rupture forces were measured as a function of temperature and force loading rate in the force-ramp mode. The data exhibit significant statistical scattering, which is fitted with a maximum likelihood estimation (MLE) algorithm. Bond rupture is described with a Morse potential based Arrhenius kinetics model. The fit yields a bond dissociation energy De = 35 kJ mol−1 and an Arrhenius pre-factor A = 6.6 × 104 s−1. The bond dissociation energy is consistent with previous experiments under identical conditions, where the force-clamp mode was employed. However, the bi-exponential decay kinetics, which the force-clamp results unambiguously revealed, are not evident in the force-ramp data. While it is possible to fit the force-ramp data with a bi-exponential model, the fit parameters differ from the force-clamp experiments. Overall, single-molecule force spectroscopy in the force-ramp mode yields data whose information content is more limited than force-clamp data. It may, however, still be necessary and advantageous to perform force-ramp experiments. The number of successful events is often higher in the force-ramp mode, and competing reaction pathways may make force-clamp experiments impossible
Recommended from our members
SMM behaviour and magnetocaloric effect in heterometallic 3d-4f coordination clusters with high azide : metal ratios
We present the synthesis and characterization of heterometallic compounds with a very large azide to metal ratio and fascinating magnetic properties
Mechanically activated rupture of single covalent bonds: evidence of force induced bond hydrolysis.
We have used temperature-dependent single molecule force spectroscopy to stretch covalently anchored carboxymethylated amylose (CMA) polymers attached to an amino-functionalized AFM cantilever. Using an Arrhenius kinetics model based on a Morse potential as a one-dimensional representation of covalent bonds, we have extracted kinetic and structural parameters of the bond rupture process. With 35.5 kJ mol−1, we found a significantly smaller dissociation energy and with 9.0 × 102 s−1 to 3.6 × 103 s−1 also smaller Arrhenius pre-factors than expected for homolytic bond scission. One possible explanation for the severely reduced dissociation energy and Arrhenius pre-factors is the mechanically activated hydrolysis of covalent bonds. Both the carboxylic acid amide and the siloxane bond in the amino-silane surface linker are in principle prone to bond hydrolysis. Scattering, slope and curvature of the scattered data plots indicate that in fact two competing rupture mechanisms are observed
- …