Bonding of brackets using a caries-protective adhesive patch

OBJECTIVES: The purpose of this study was to assess the shear bond strength (SBS) of metal brackets when placed with a caries protective adhesive patch. METHODS: Forty stainless steel brackets (Ormco) were bonded to 40 bovine enamel samples according to the following conditioning/bonding procedures using a resin-based orthodontic luting material (Heliosit Orthodontic, N=10 per group): (A) 35% phosphoric acid (30s), rinse and dry; (B) as in A but additional placement of a prototype adhesive patch (Ivoclar Vivadent) using a bonding agent (Heliobond); (C) application of a two-step self-etch adhesive (AdheSE); (D) as in C but additional patch placement. Samples were stored at 37 degrees C for 24h. SBS was measured with a universal testing machine with a crosshead speed of 0.5mm/min and the adhesive remnant index (ARI) was determined under a stereomicroscope (16x). RESULTS: Mean SBS (standard deviation) values were as follows: (A) 16.6 (6.4)MPa; (B) 12.2 (5.8); (C) 12.9 (5.0); and (D) 10.5 (4.7). Analysis of variance followed by Bonferroni correction revealed no statistically significant differences. In 2 (B) and 4 (D) specimens, complete retention of the adhesive patch was observed. CONCLUSIONS: All treatment groups showed adequate bond strength values. The adhesive patch could therefore be applied in combination with orthodontic brackets and seal the enamel adjacent to the bracket

In vitro tooth cleaning efficacy of electric toothbrushes around brackets

This in vitro study assessed the cleaning efficacy of different electric toothbrushes around upper incisor brackets. Standard and Mini Diamond™ brackets were fixed on black-stained teeth. The teeth were coated with white titanium oxide and brushed in a machine twice for 1 minute each. Twelve different brush heads with either a wiping or an oscillating-rotating action were tested. After brushing, the teeth were scanned, the black surfaces were assessed planimetrically and a modified plaque index for orthodontic patients (PIOP) was introduced. Tooth areas, which were black again after brushing indicated tooth surface contact of the filaments and were expressed as a percentage of total area. The remaining white areas around the brackets indicated 'plaque-retentive' niches. Analysis of variance was used for individual comparison of the brush types. Bonferroni/Dunn adjustment was applied for multiple testing. The Sonicare® toothbrush handle with the brush head 'Compact ProResults' (81.7 per cent) and the brush head 'Standard ProResults' (80.8 per cent), as well as the sonic Waterpik® toothbrush SR 800E with the standard brush head (78.2 per cent), showed statistically significantly better cleaning efficacy than all others. The poorest cleaning efficacy was observed for the oscillating-rotating Braun Oral-B Professional Care with the brush head 'Ortho' (less than 50 per cent). The planimetric findings were in correspondence with the results of the PIOP assessment. Cleaning efficacy of electric toothbrushes around brackets on upper incisors was different between the tested brushes. The PIOP was practicable, effective, and easy to use, although it has to be verified in a clinical stud

Comparative effectiveness of hand scaling by undergraduate dental students following a two-week pre-clinical training course

BACKGROUND The Bologna reform resulted in a drastic restructuring of pre-clinical training courses at the University of Zurich. The aim of this study was to assess student pre-clinical scaling/root planning skills after just 8.5 hours of manual training. MATERIAL AND METHODS Three consecutive classes of dental students (n = 41; n = 34; n = 48) were tasked with removing lacquer concrement from the maxillary left canine on a typodont using Gracey and universal (Deppeler M23A) curettes. At baseline (prior to instruction), a timed five-minute session of scaling/root planning was undertaken. The second scaling/root planning session was held immediately following training. Eight experienced dental hygienists and eight lay people served as positive and negative controls, using the same instruments and time limit, respectively. Instrumented teeth were collected, scanned and planimetrically analysed for the percentage of tooth surface cleaned. Statistical analyses were performed to assess the dental students' improvement after the training (Wilcoxon signed-rank test) and to compare it to that of laypeople and dental hygienists (Kruskal-Wallis rank sum test followed by Conover's post hoc test). RESULTS At baseline, the dental students' mean scaling scores of the cleaned surfaces were not significantly different than those of laypeople (29.8%, 31.0%, 42% vs 27.9%). However, after 8.5 hours of manual training, the students' ability to clean the maxillary tooth improved significantly and they achieved mean removal values of 61.7%, 79.5% and 76% compared to the 67.4% (P < .001) of the experienced dental hygienists (Tables Tables  and ). There were no statistically significant differences between the scores achieved by students after training and those achieved by experienced dental hygienists. CONCLUSION A shortened pre-clinical training time was sufficient for students to acquire the basic scaling/root planning skills needed in preparation for clinical training. Further research is needed to identify ways to help students consistently reach highest skill levels

Effect of application of a PVP-iodine solution before and during subgingival ultrasonic instrumentation on post-treatment bacteremia: A randomized single-center placebo-controlled clinical trial

BACKGROUND: To assess the effect of concomitant subgingival rinsing with 10% PVP-iodine during subgingival instrumentation on the prevalence and magnitude of bacteremia of oral origin. MATERIALS AND METHODS: Subgingival instrumentation was performed with water or PVP-iodine rinse in patients with periodontitis. Prior to instrumentation, subjects gargled for 1 min with the allocated liquid. Pockets were then rinsed for 1 min and subgingivally instrumented with liquid-cooled (water/PVP-iodine) ultrasonic scalers (1 min). Two minutes later, a blood sample from the arm vein was drawn using a lysis centrifugation blood culture system for quantitative microbiological analysis. Non-parametric statistical tests were performed to assess differences in the prevalence and extent of bacteremia between groups. RESULTS: Of the 19 samples in each group, oral-borne bacteremia was detected in 10 of the control and 2 of the test samples. With an average of 3.0 [1;5] colony forming units, significantly less bacteria and bacteremia were found in the test group compared to the controls (12.2 [1;46]) (p=0.003). Anaerobic bacteria were not found in the test group. CONCLUSIONS: Bacteremia after subgingival instrumentation with concomitant PCP-iodine rinsing is reduced but not eliminated. Therefore, it might be recommended for patients at a high risk of endocarditis or infection of endoprostheses. However, preventive antibiotic treatment should not be omitted. This article is protected by copyright. All rights reserved

In Vitro Evaluation of the Permeability of Different Resorbable Xenogeneic Membranes after Collagenolytic Degradation

In this in vitro study, we compare the penetration of cells through different resorbable collagen membranes, which were collagenolytically degraded over different time periods. Three different resorbable collagen membranes were evaluated, including two non-cross-linked (NCL) membranes-namely, a porcine (NCL-P) and an equine (NCL-E) membrane-and an enzymatically cross-linked porcine (ECL-B) membrane. A special two-chamber model was fabricated, allowing for the placement of separating membranes, and a non-porous polyester membrane was used as a negative control (C), in order to verify the impermeability of the experimental chamber device. Round membrane samples with a diameter of 16 mm were fabricated. Eighteen membranes of each type were punched and placed on polyethylene nets as carriers. The membranes were then biodegraded-each on its carrier-in 12-well polystyrene plates: three samples of each membrane type were degraded for 1.5, 3, 6, or 12 h in 2 mL of a buffered collagenase solution, at 37 °C. For control purposes, three samples of each membrane type were not degraded, but only immersed in buffer solution for 1.5, 3, 6, or 12 h, at 37 °C. Another three samples of each type of membrane were degraded until complete dissolution, in order to determine the full hydroxyproline content for comparison. Liquid-preserved boar semen (containing at least 120 million sperm cells per milliliter) was used to test the cell occlusivity of the degraded membranes. At baseline and initial degradation, all tested membranes were tight, and no penetration was observed with up to 30 min of incubation time (results not shown). After 1.5 h, cells were partially capable of penetrating the NCL-E membrane only. One sample showed leakage, with a sperm volume of 1.7 million cells/mL over all samples. No penetration occurred in the test, NCL-P, and ECL-B groups. After a degradation time of 3 h, the NCL-P and ECL-B membranes remained occlusive to cells. All the membranes and measurements indicated leakage in the NCL-E group. After 6 h, four NCL-P measurements showed the first signs of cell penetration, as boar spermatozoa were detectable in the lower chamber (64 million cells/mL). The ECL-B membranes remained completely cell occlusive. After 12 h, four NCL-P measurements were cell penetration positive (14.6 million cells/mL), while the ECL-B group remained tight and showed no cell penetration. As the findings of our study are well in accordance with the results of several previous animal studies, it can be concluded that the surrogate model is capable of performing rapid and cheap screening of cell occlusivity for different collagen membranes in a very standardized manner. In particular, claims of long degradation resistance can be easily proven and compared. As the boar spermatozoa used in the present report had a size of 9 × 5 μm, smaller bacteria are probably also able to penetrate the leaking membranes; in this regard, our proposed study set-up may provide valuable information, although it must be acknowledged that sperm cells show active mobility and do not only translocate by growth

Gravity waves in the middle atmosphere during the MaCWAVE winter campaign: evidence of mountain wave critical level encounters

Falling sphere and balloon wind and temperature data from the MaCWAVE winter campaign, which was conducted in northern Scandinavia during January&amp;nbsp;2003, are analyzed to investigate gravity wave characteristics in the stratosphere and mesosphere. There were two stratospheric warming events occurring during the campaign, one having a maximum temperature perturbation at ~45 km during 17&amp;ndash;19&amp;nbsp;January, and the other having a maximum perturbation at ~30 km during 24&amp;ndash;27&amp;nbsp;January. The former was a major event, whereas the latter was a minor one. Both warmings were accompanied by upper mesospheric coolings, and during the second warming, the upper mesospheric cooling propagated downward. Falling sphere data from the two salvos on 24&amp;ndash;25&amp;nbsp;January and 28&amp;nbsp;January were analyzed for gravity wave characteristics. Gravity wave perturbations maximized at ~45&amp;ndash;50 km, with a secondary maximum at ~60 km during Salvo&amp;nbsp;1; for Salvo&amp;nbsp;2, wave activity was most pronounced at ~60 km and above. &lt;P style=&quot;line-height: 20px;&quot;&gt; Gravity wave horizontal propagation directions are estimated using the conventional hodographic analysis combined with the S-transform (a Gaussian wavelet analysis method). The results are compared with those from a Stokes analysis. They agree in general, though the former appears to provide better estimates for some cases, likely due to the capability of the S-transform to obtain robust estimates of wave amplitudes and phase differences between different fields. &lt;P style=&quot;line-height: 20px;&quot;&gt; For Salvo&amp;nbsp;1 at ~60 km and above, gravity waves propagated towards the southeast, whereas for Salvo&amp;nbsp;2 at similar altitudes, waves propagated predominantly towards the northwest or west. These waves were found not to be topographic waves. Gravity wave motions at ~45&amp;ndash;50 km in Salvo&amp;nbsp;1 were more complicated, but they generally had large amplitudes, short vertical scales, and their hodographs revealed a northwest-southeast orientation. In addition, the ratios between wave amplitudes and intrinsic phase speeds generally displayed a marked peak at ~45&amp;ndash;50 km and decreased sharply at ~50 km, where the background winds were very weak. These results suggest that these wave motions were most likely topographic waves approaching their critical levels. Waves were more nearly isotropic in the lower stratosphere

Enhancement of tissue lesion depth by dual wavelength irradiation with the Nd-YAG/KTP laser: Perspectives for laser prostatectomy

The Nd-YAG/KTP laser coagulates and vaporizes prostate tissue. The objective of this study was to investigate the combined effects of both wavelengths and to determine the irradiation parameters allowing the largest lesion volume. Chicken breast tissue was irradiated ex vivo. Consecutive 1064 and 532 nm Nd-YAG/KTP laser irradiations were performed for different combinations (30 W/10 W, 20 W/20 W, 10 W/30 W) with variable total fluence (1200 J, 2400 J, 3600 J) and compared to isofluent single wavelengths at 40 W irradiation. The depths, diameters and volumes of the total lesion as well as the vaporization effects of the 532 nm wavelength on normal and on priorly coagulated tissue were analysed. Maximum total lesion depths (p< 0.001) were found under combined Nd-YAG/KTP (20 W/20 W) irradiation conditions. Ablation efficacy of the 532 nm wavelength was reduced after prior 1064 nm irradiation, but crater depths were increased. Dual wavelength irradiation with the Nd-YAG/KTP laser induces a specific denaturation process. This may represent a new approach to increase the depth of coagulation necrosis, and thus the treated volume, thereby improving long-term result

Bone defect development in experimental canine peri-implantitis models: a systematic review

PURPOSE To provide a systematic overview of preclinical research regarding bone defect formation around different implant surfaces after ligature-induced peri-implantitis models in dogs. Two focused questions were formulated: 'How much bone loss can be expected after a certain time of ligature induced peri-implantitis?' and 'Do different implant types, dog breeds and study protocols differ in their extent of bone loss?' MATERIALS AND METHODS A systematic literature search was conducted on four databases (MEDLINE, Web of Science, EMBASE and Scopus). Observations, which consisted of bone defects measured directly after ligature removal in canine models, were included and analysed. Two approaches were used to analyse the relatively heterogeneous studies that fulfilled the inclusion criteria. First, separate simple linear regressions were calculated for each study and implant surface, for which observations were available across multiple time points. Second, a linear mixed model was specified for the observations at 12 weeks after ligature initiation, and assessing the potential influencing factors on defect depth was explored using lasso regularisation. RESULTS Thirty-six studies with a total of 1082 implants were included after. Bone loss was determined at different time points, either with clinical measurements radiographically or histologically. Different implant groups [e.g. turned, sand-blasted-acid-etched (SLA), titanium-plasma-sprayed (TPS) and other rough surfaces] were assessed and described in the studies. A mean incremental defect depth increase of 0.08 mm (SD: -0.01-0.28 mm) per week was observed. After 12 weeks, the defect depths ranged between 0.7 and 5 mm. Based on the current data set, implant surface could not be statistically identified as an essential factor in defect depth after 12 weeks of ligature-induced peri-implantitis. CONCLUSION Expectable defect depth after a specific time of ligature-induced peri-implantitis can vary robustly. It is currently impossible to delineate apparent differences in bone loss around different implant surfaces

Propagation of short-period gravity waves at high-latitudes during the MaCWAVE winter campaign

As part of the MaCWAVE (Mountain and Convective Waves Ascending Vertically) winter campaign an all-sky monochromatic CCD imager has been used to investigate the properties of short-period mesospheric gravity waves at high northern latitudes. Sequential measurements of several nightglow emissions were made from Esrange, Sweden, during a limited period from 27&amp;ndash;31&amp;nbsp;January 2003. Coincident wind measurements over the altitude range (~80&amp;ndash;100 km) using two meteor radar systems located at Esrange and Andenes have been used to perform a novel investigation of the intrinsic properties of five distinct wave events observed during this period. Additional lidar and MSIS model temperature data have been used to investigate their nature (i.e. freely propagating or ducted). Four of these extensive wave events were found to be freely propagating with potential source regions to the north of Scandinavia. No evidence was found for strong orographic forcing by short-period waves in the airglow emission layers. The fifth event was most unusual exhibiting an extensive, but much smaller and variable wavelength pattern that appeared to be embedded in the background wind field. Coincident wind measurements indicated the presence of a strong shear suggesting this event was probably due to a large-scale Kelvin-Helmholtz instability

A case of polymicrogyria in macaque monkey: impact on anatomy and function of the motor system

Background: Polymicrogyria is a malformation of the cerebral cortex often resulting in epilepsy or mental retardation. It remains unclear whether this pathology affects the structure and function of the corticospinal (CS) system. The anatomy and histology of the brain of one macaque monkey exhibiting a spontaneous polymicrogyria (PMG monkey) were examined and compared to the brain of normal monkeys. The CS tract was labelled by injecting a neuronal tracer (BDA) unilaterally in a region where low intensity electrical microstimulation elicited contralateral hand movements (presumably the primary motor cortex in the PMG monkey). Results: The examination of the brain showed a large number of microgyri at macro- and microscopic levels, covering mainly the frontoparietal regions. The layered cortical organization was locally disrupted and the number of SMI-32 stained pyramidal neurons in the cortical layer III of the presumed motor cortex was reduced. We compared the distribution of labelled CS axons in the PMG monkey at spinal cervical level C5. The cumulated length of CS axon arbors in the spinal grey matter was not significantly different in the PMG monkey. In the red nucleus, numerous neurons presented large vesicles. We also assessed its motor performances by comparing its capacity to execute a complex reach and grasp behavioral task. The PMG monkey exhibited an increase of reaction time without any modification of other motor parameters, an observation in line with a normal CS tract organisation. Conclusion: In spite of substantial cortical malformations in the frontal and parietal lobes, the PMG monkey exhibits surprisingly normal structure and function of the corticospinal system