232 research outputs found
Intracavity Raman conversion of a red semiconductor disk laser using diamond
We demonstrate a diamond Raman laser intracavity-pumped by a red semiconductor disk laser (~675 nm) for laser emission at around 740 nm. Output power up to 82 mW of the Stokes-shifted field was achieved, limited by the available pump power, with an output coupling of 1.5%. We also report wavelength tuning of the diamond Raman laser over 736 - 750 nm
Vibration-tolerant narrow-linewidth semiconductor disk laser using novel frequency-stabilisation schemes
This paper will present developments in narrow-linewidth semiconductor-disk-laser systems using novel frequency-stabilisation schemes for reduced sensitivity to mechanical vibrations, a critical requirement for mobile applications. Narrow-linewidth single-frequency lasers are required for a range of applications including metrology and high-resolution spectroscopy. Stabilisation of the laser was achieved using a monolithic fibre-optic ring resonator with free spectral range of 181 MHz and finesse of 52 to act as passive reference cavity for the laser. Such a cavity can operate over a broad wavelength range and is immune to a wide band of vibrational frequency noise due to its monolithic implementation. The frequency noise of the locked system has been measured and compared to typical Fabry-Perot-locked lasers using vibration equipment to simulate harsh environments, and analysed here. Locked linewidths of < 40 kHz have been achieved. These developments offer a portable, narrow-linewidth laser system for harsh environments that can be flexibly designed for a range of applications
Processing and characterisation of II-VI ZnCdMgSe thin film gain structures
Lattice-matched II-VI selenide quantum well (QW) structures grown on InP substrates can be designed for emission throughout the visible spectrum. InP has, however, strong visible-light absorption, so that a method for epitaxial lift-off and transfer to transparent substrates is desirable for vertically-integrated devices. We have designed and grown, via molecular beam epitaxy, ZnCdSe/ZnCdMgSe multi-QW gain regions for vertical emission, with the QWs positioned for resonant periodic gain. The release of the 2.7 μm-thick ZnCdSe/ZnCdMgSe multi-QW film is achieved via selective wet etching of the substrate and buffer layers leaving only the epitaxial layers, which are subsequently transferred to transparent substrates, including glass and thermally-conductive diamond. Post-transfer properties are investigated, with power and temperature-dependent surface and edge-emitting photoluminescence measurements demonstrating no observable strain relaxation effects or significant shift in comparison to unprocessed samples. The temperature dependant quantum well emission shift is found experimentally to be 0.13 nm/K. Samples capillary-bonded epitaxial-side to glass exhibited a 6 nm redshift under optical pumping of up to 35 mW at 405 nm, corresponding to a 46 K temperature increase in the pumped region; whereas those bonded to diamond exhibited no shift in quantum well emission, and thus efficient transfer of the heat from the pumped region. Atomic force microscopy analysis of the etched surface reveals a root-mean-square roughness of 3.6 nm. High quality optical interfaces are required to establish a good thermal and optical contact for high power optically pumped laser applications
Islet Autoantibody Standardization Program 2018 Workshop:Interlaboratory Comparison of Glutamic Acid Decarboxylase Autoantibody Assay Performance
BACKGROUND: The Islet Autoantibody Standardization Program (IASP) aims to improve the performance of immunoassays measuring type 1 diabetes (T1D)-associated autoantibodies and the concordance of results among laboratories. IASP organizes international interlaboratory assay comparison studies in which blinded serum samples are distributed to participating laboratories, followed by centralized collection and analysis of results, providing participants with an unbiased comparative assessment. In this report, we describe the results of glutamic acid decarboxylase autoantibody (GADA) assays presented in the IASP 2018 workshop. METHODS: In May 2018, IASP distributed to participants uniquely coded sera from 43 new-onset T1D patients, 7 multiple autoantibody-positive nondiabetic individuals, and 90 blood donors. Results were analyzed for the following metrics: sensitivity, specificity, accuracy, area under the ROC curve (ROC-AUC), partial ROC-AUC at 95% specificity (pAUC95), and concordance of qualitative and quantitative results. RESULTS: Thirty-seven laboratories submitted results from a total of 48 different GADA assays adopting 9 different formats. The median ROC-AUC and pAUC95 of all assays were 0.87 [interquartile range (IQR), 0.83-0.89] and 0.036 (IQR, 0.032-0.039), respectively. Large differences in pAUC95 (range, 0.001-0.0411) were observed across assays. Of formats widely adopted, bridge ELISAs showed the best median pAUC95 (0.039; range, 0.036-0.041). CONCLUSIONS: Several novel assay formats submitted to this study showed heterogeneous performance. In 2018, the majority of the best performing GADA immunoassays consisted of novel or established nonradioactive tests that proved on a par or superior to the radiobinding assay, the previous gold standard assay format for GADA measurement
Mantle 3He distribution and deep circulation in the Indian Ocean
Author Posting. © American Geophysical Union, 2004. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 109 (2004): C06012, doi:10.1029/2003JC002028.The World Ocean Circulation Experiment Indian Ocean helium isotope data are mapped and features of intermediate and deep circulation are inferred and discussed. The 3He added to the deep Indian Ocean originates from (1) a strong source on the mid-ocean ridge at about 19°S/65°E, (2) a source located in the Gulf of Aden in the northwestern Indian Ocean, (3) sources located in the convergent margins in the northeastern Indian Ocean, and (4) water imported from the Indonesian Seas. The main circulation features inferred from the 3He distribution include (1) deep (2000–3000 m) eastward flow in the central Indian Ocean, which overflows into the West Australian Basin through saddles in the Ninetyeast Ridge, (2) a deep (2000–3000 m) southwestward flow in the western Indian Ocean, and (3) influx of Banda Sea Intermediate Waters associated with the deep core (1000–1500 m) of the through flow from the Pacific Ocean. The large-scale 3He distribution is consonant with the known pathways of deep and bottom water circulation in the Indian Ocean.National Science Foundation support is acknowledged for the
UM part of the work through grants OCE-9820131 and OCE-998150.
Support for the LDEO portion of the work was obtained from the National
Science Foundation through awards OCE 94-13162 and OCE 98-20130
Singly-resonant sum frequency generation of visible light in a semiconductor disk laser
In this paper a generic approach for visible light generation is presented. It is based on sum frequency generation between a semiconductor disk laser and a solid-state laser, where the frequency mixing is achieved within the cavity of the semiconductor disk laser using a singlepass of the solid-state laser light. This exploits the good beam quality and high intra-cavity power present in the semiconductor disk laser to achieve high conversion efficiency. Combining sum frequency mixing and semiconductor disk lasers in this manner allows in principle for generation of any wavelength within the visible spectrum, by appropriate choice of semiconductor material and single-pass laser wavelength
Influence of rain on air-sea gas exchange : lessons from a model ocean
Author Posting. © American Geophysical Union, 2004. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 109 (2004): C08S18, doi:10.1029/2003JC001806.Rain has been shown to significantly enhance the rate of air-water gas exchange in fresh water environments, and the mechanism behind this enhancement has been studied in laboratory experiments. In the ocean, the effects of rain are complicated by the potential influence of density stratification at the water surface. Since it is difficult to perform controlled rain-induced gas exchange experiments in the open ocean, an SF6 evasion experiment was conducted in the artificial ocean at Biosphere 2. The measurements show a rapid depletion of SF6 in the surface layer due to rain enhancement of air-sea gas exchange, and the gas transfer velocity was similar to that predicted from the relationship established from freshwater laboratory experiments. However, because vertical mixing is reduced by stratification, the overall gas flux is lower than that found during freshwater experiments. Physical measurements of various properties of the ocean during the rain events further elucidate the mechanisms behind the observed response. The findings suggest that short, intense rain events accelerate gas exchange in oceanic environments.Funding was provided by a generous grant from
the David and Lucile Packard Foundation
Hybrid GaN LED with capillary-bonded II–VI MQW color-converting membrane for visible light communications
The rapid emergence of gallium-nitride (GaN) light-emitting diodes (LEDs) for solid-state lighting has created a timely opportunity for optical communications using visible light. One important challenge to address this opportunity is to extend the wavelength coverage of GaN LEDs without compromising their modulation properties. Here, a hybrid source for emission at 540 nm consisting of a 450 nm GaN micro-sized LED (micro-LED) with a micron-thick ZnCdSe/ZnCdMgSe multi-quantum-well color-converting membrane is reported. The membrane is liquid-capillary-bonded directly onto the sapphire window of the micro-LED for full hybridization. At an injection current of 100 mA, the color-converted power was found to be 37 μW. At this same current, the −3 dB optical modulation bandwidth of the bare GaN and hybrid micro-LEDs were 79 and 51 MHz, respectively. The intrinsic bandwidth of the color-converting membrane was found to be power-density independent over the range of the micro-LED operation at 145 MHz, which corresponds to a mean carrier lifetime of 1.9 ns
Concentrations and size distributions of fungal bioaerosols in a municipal landfill
The object of this research was to study the behavior of fungal bioaerosols during a sampling period of 12 months (April 2015–April 2016), in each treatment stages of a landfill located in Atlántico Department, Colombia. The fungi bioaerosol samples were collected using a Six-Stage Viable Andersen Cascade Impactor - Thermo Fisher Scientific, a vacuum pump with a flow rate of 28.3 L/min–1, and ammeter KESTREL 4500 for the weather conditions. With the large amount of data obtained, a database was made in excel and analyzed using Statgraphics Centurion XVI software. The processing of data mining was carried out applying to a generalized linear regression model and Multifactorial ANOVA. Golden Surfer 11 program was used to stablish the distribution of temporal and spational mold airborne. The Variables: sampling campaign, stage, taxa, temperature and relative humidity presented a statistically significant correlation with the concentration P-value = 0. The concentrations of fungal bioaerosols varied considerably over the whole sampling period with average concentrations from 73.02 ± 26, 75 CFUs/m3 to 1830.38 ± 971.28 CFUs/m3. The fungal bioaerosols presented in both the coarse and fine fraction; but the fraction of 2.1–3.3 μm (stage 4) was the fraction of the dominant size in terms of higher concentration. According to the taxa identification, there was a higher prevalence of Aspergillus: the highest concentration corresponds to A. fumigatus, associated to toxins that may be cytotoxic [1, 2]
- …