Limitations of estimating branch volume from terrestrial laser scanning

Quantitative structural models (QSMs) are frequently used to simplify single tree point clouds obtained by terrestrial laser scanning (TLS). QSMs use geometric primitives to derive topological and volumetric information about trees. Previous studies have shown a high agreement between TLS and QSM total volume estimates alongside field measured data for whole trees. Although already broadly applied, the uncertainties of the combination of TLS and QSM modelling are still largely unexplored. In our study, we investigated the effect of scanning distance on length and volume estimates of branches when deriving QSMs from TLS data. We scanned ten European beech (Fagus sylvatica L.) branches with an average length of 2.6 m. The branches were scanned from distances ranging from 5 to 45 m at step intervals of 5 m from three scan positions each. Twelve close-range scans were performed as a benchmark. For each distance and branch, QSMs were derived. We found that with increasing distance, the point cloud density and the cumulative length of the reconstructed branches decreased, whereas individual volumes increased. Dependent on the QSM hyperparameters, at a scanning distance of 45 m, cumulative branch length was on average underestimated by − 75%, while branch volume was overestimated by up to + 539%. We assume that the high deviations are related to point cloud quality. As the scanning distance increases, the size of the individual laser footprints and the distances between them increase, making it more difficult to fully capture small branches and to adjust suitable QSMs

Limitations of estimating branch volume from terrestrial laser scanning

Quantitative structural models (QSMs) are frequently used to simplify single tree point clouds obtained by terrestrial laser scanning (TLS). QSMs use geometric primitives to derive topological and volumetric information about trees. Previous studies have shown a high agreement between TLS and QSM total volume estimates alongside field measured data for whole trees. Although already broadly applied, the uncertainties of the combination of TLS and QSM modelling are still largely unexplored. In our study, we investigated the effect of scanning distance on length and volume estimates of branches when deriving QSMs from TLS data. We scanned ten European beech (Fagus sylvatica L.) branches with an average length of 2.6 m. The branches were scanned from distances ranging from 5 to 45 m at step intervals of 5 m from three scan positions each. Twelve close-range scans were performed as a benchmark. For each distance and branch, QSMs were derived. We found that with increasing distance, the point cloud density and the cumulative length of the reconstructed branches decreased, whereas individual volumes increased. Dependent on the QSM hyperparameters, at a scanning distance of 45 m, cumulative branch length was on average underestimated by − 75%, while branch volume was overestimated by up to + 539%. We assume that the high deviations are related to point cloud quality. As the scanning distance increases, the size of the individual laser footprints and the distances between them increase, making it more difficult to fully capture small branches and to adjust suitable QSMs.Peer reviewe

In-situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

The IceCube Neutrino Observatory instruments about 1 km3 of deep, glacial ice at the geographic South Pole using 5160 photomultipliers to detect Cherenkov light emitted by charged relativistic particles. A unexpected light propagation effect observed by the experiment is an anisotropic attenuation, which is aligned with the local flow direction of the ice. Birefringent light propagation has been examined as a possible explanation for this effect. The predictions of a first-principles birefringence model developed for this purpose, in particular curved light trajectories resulting from asymmetric diffusion, provide a qualitatively good match to the main features of the data. This in turn allows us to deduce ice crystal properties. Since the wavelength of the detected light is short compared to the crystal size, these crystal properties do not only include the crystal orientation fabric, but also the average crystal size and shape, as a function of depth. By adding small empirical corrections to this first-principles model, a quantitatively accurate description of the optical properties of the IceCube glacial ice is obtained. In this paper, we present the experimental signature of ice optical anisotropy observed in IceCube LED calibration data, the theory and parametrization of the birefringence effect, the fitting procedures of these parameterizations to experimental data as well as the inferred crystal properties.</p

In situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

The IceCube Neutrino Observatory instruments about 1 km3 of deep, glacial ice at the geographic South Pole. It uses 5160 photomultipliers to detect Cherenkov light emitted by charged relativistic particles. An unexpected light propagation effect observed by the experiment is an anisotropic attenuation, which is aligned with the local flow direction of the ice. We examine birefringent light propagation through the polycrystalline ice microstructure as a possible explanation for this effect. The predictions of a first-principles model developed for this purpose, in particular curved light trajectories resulting from asymmetric diffusion, provide a qualitatively good match to the main features of the data. This in turn allows us to deduce ice crystal properties. Since the wavelength of the detected light is short compared to the crystal size, these crystal properties include not only the crystal orientation fabric, but also the average crystal size and shape, as a function of depth. By adding small empirical corrections to this first-principles model, a quantitatively accurate description of the optical properties of the IceCube glacial ice is obtained. In this paper, we present the experimental signature of ice optical anisotropy observed in IceCube light-emitting diode (LED) calibration data, the theory and parameterization of the birefringence effect, the fitting procedures of these parameterizations to experimental data, and the inferred crystal properties.Peer Reviewe

In situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

The IceCube Neutrino Observatory instruments about 1 km3 of deep, glacial ice at the geographic South Pole. It uses 5160 photomultipliers to detect Cherenkov light emitted by charged relativistic particles. An unexpected light propagation effect observed by the experiment is an anisotropic attenuation, which is aligned with the local flow direction of the ice. We examine birefringent light propaga- tion through the polycrystalline ice microstructure as a pos- sible explanation for this effect. The predictions of a first- principles model developed for this purpose, in particular curved light trajectories resulting from asymmetric diffusion, provide a qualitatively good match to the main features of the data. This in turn allows us to deduce ice crystal properties. Since the wavelength of the detected light is short compared to the crystal size, these crystal properties include not only the crystal orientation fabric, but also the average crystal size and shape, as a function of depth. By adding small empiri- cal corrections to this first-principles model, a quantitatively accurate description of the optical properties of the IceCube glacial ice is obtained. In this paper, we present the exper- imental signature of ice optical anisotropy observed in Ice- Cube light-emitting diode (LED) calibration data, the theory and parameterization of the birefringence effect, the fitting procedures of these parameterizations to experimental data, and the inferred crystal propertie

TXS 0506+056 with Updated IceCube Data

Past results from the IceCube Collaboration have suggested that the blazar TXS 0506+056 is a potential source of astrophysical neutrinos. However, in the years since there have been numerous updates to event processing and reconstruction, as well as improvements to the statistical methods used to search for astrophysical neutrino sources. These improvements in combination with additional years of data have resulted in the identification of NGC 1068 as a second neutrino source candidate. This talk will re-examine time-dependent neutrino emission from TXS 0506+056 using the most recent northern-sky data sample that was used in the analysis of NGC 1068. The results of using this updated data sample to obtain a significance and flux fit for the 2014 TXS 0506+056 "untriggered" neutrino flare are reported

Galactic Core-Collapse Supernovae at IceCube: “Fire Drill” Data Challenges and follow-up

The next Galactic core-collapse supernova (CCSN) presents a once-in-a-lifetime opportunity to make astrophysical measurements using neutrinos, gravitational waves, and electromagnetic radiation. CCSNe local to the Milky Way are extremely rare, so it is paramount that detectors are prepared to observe the signal when it arrives. The IceCube Neutrino Observatory, a gigaton water Cherenkov detector below the South Pole, is sensitive to the burst of neutrinos released by a Galactic CCSN at a level >10σ. This burst of neutrinos precedes optical emission by hours to days, enabling neutrinos to serve as an early warning for follow-up observation. IceCube\u27s detection capabilities make it a cornerstone of the global network of neutrino detectors monitoring for Galactic CCSNe, the SuperNova Early Warning System (SNEWS 2.0). In this contribution, we describe IceCube\u27s sensitivity to Galactic CCSNe and strategies for operational readiness, including "fire drill" data challenges. We also discuss coordination with SNEWS 2.0

All-Energy Search for Solar Atmospheric Neutrinos with IceCube

The interaction of cosmic rays with the solar atmosphere generates a secondary flux of mesons that decay into photons and neutrinos – the so-called solar atmospheric flux. Although the gamma-ray component of this flux has been observed in Fermi-LAT and HAWC Observatory data, the neutrino component remains undetected. The energy distribution of those neutrinos follows a soft spectrum that extends from the GeV to the multi-TeV range, making large Cherenkov neutrino telescopes a suitable for probing this flux. In this contribution, we will discuss current progress of a search for the solar neutrino flux by the IceCube Neutrino Observatory using all available data since 2011. Compared to the previous analysis which considered only high-energy muon neutrino tracks, we will additionally consider events produced by all flavors of neutrinos down to GeV-scale energies. These new events should improve our analysis sensitivity since the flux falls quickly with energy. Determining the magnitude of the neutrino flux is essential, since it is an irreducible background to indirect solar dark matter searches