AS-825-17 Resolution on Academic Standards for Masters Degrees

Defines that graduate courses, as primarily for graduate study, follow guidelines in coded memo

Fabrication and Composition Control of NiTi Shape Memory Thin Films for Microactuators

Microactuators fabricated with NiTi thin films take advantage of this material’s large energy density (~5-10 joules/cm3) and high strain recovery (~8%). Microelectromechanical Systems (MEMS) devices designed with these actuators can serve as biosensors, micro-fluidic pumps or optical switches. However, the fundamental mechanical properties stemming from the crystalline structure of these shape memory NiTi films have not been fully characterized with MEMS scale test structures. Understanding the relationship of crystalline structure, film stoichiometry, and phase transformation temperatures is crucial when designing a MEMS actuator. In addition, force displacement curves for both the martensite and austenite phases of NiTi are necessary to know how an actuator will perform. Atomically equal NiTi thin films were deposited on silicon wafers by co-sputtering a NiTi and a Ti target at 250W and 75W respectively. These power settings yielded a deposition rate of 12 angstroms per second. Pre-sputtering the NiTi and Ti targets effectively reduced the base pressure and cleaned the target surfaces, which made oxygen undetectable in the films. A 100 nm chromium layer provided excellent adhesion to Si, but poor adhesion to SiO2. The films will eventually be used in a cantilever test structure in conjunction with a surface profilometer to measure their mechanical and actuation properties

Utilizing Quantum Dots to Enhance Solar Spectrum Conversion Efficiencies for Photovoltaics

Silicon-based photovoltaics typically convert less than 30% of the solar spectrum into usable electric power. This study explores the utilization of CdSe based quantum dots as spectral converters that absorb the under utilized UV portion of the solar spectrum and fluoresce at wavelengths near the band-gap of silicon-based solar cells. A flexible 1 mm thick thin-film structure that contains an array of microfluidic channels is designed and fabricated in polydimethylsiloxane (PDMS) using soft-lithographic techniques. The channels are approximately 85 microns wide by 37 microns tall and are filled with a solution containing the quantum dots. The thin-film structure can easily be attached to the surface of a single-junction solar cell. As a result, solar energy striking the coated solar cell with wavelengths less than 450 nm, which would normally experience low conversion efficiency, are absorbed by the quantum dots which fluoresce at 620nm. The high energy photons are converted to photons near the band-gap which increase the overall conversion efficiency of the solar cell. The quantum dots employed in this study are fabricated with a CdSe core (5.2 nm) and a ZnS outer shell and they exhibit a 25 nm hydrodynamic diameter. The UV-VIS spectral transmission properties of PDMS, along with its refractive index, are determined in order to characterize the spectral conversion efficiency of the thin-film structure. A model is developed to predict the optimum path length and concentration of quantum dots required to improve the power output of an amorphous silicon solar cell by 10%

Understanding the dynamics of segregation bands of simulated granular material in a rotating drum

Axial segregation of a binary mixture of grains in a rotating drum is studied using Molecular Dynamics (MD) simulations. A force scheme leading to a constant restitution coefficient is used and shows that axial segregation is possible between two species of grains made of identical material differing by size. Oscillatory motion of bands is investigated and the influence of the frictional properties elucidated. The mechanism of bands merging is explained using direct imaging of individual grains

SU(3) Decomposition of Two-Body B Decay Amplitudes

We present the complete flavor SU(3) decomposition of decay amplitudes for decays of the triplet (B^+_u, B^0_d, B^0_s) of B mesons nonleptonically into two pseudoscalar mesons. This analysis holds for arbitrarily broken SU(3) and can be used to generate amplitude relations when physical arguments permit one to neglect or relate any of the reduced amplitudes.Comment: 31 pages, revtex, no figure

Pre–post intervention exploring cognitive function and relationships with weight loss, intervention adherence and dropout

Objective: To evaluate the association between baseline cognitive function, intervention dropout, adherence and 3-month weight loss (WL) when controlling for confounding demographic variables. Methods: 107 (Mage = 40.9 yrs.), BMI in the overweight and obese range (BMI = 35.6 kg/m2), men (N = 17) and women (N = 90) completed a 3-month WL intervention. Participants attended weekly behavioral sessions, comply with a reduced calorie diet, and complete 100 min of physical activity (PA)/wk. Cognitive function tasks at baseline included Flanker (attention), Stroop (executive control) and working memory, demographics, body weight and cardiovascular fitness were assessed at baseline. Session attendance, adherence to PA and diet were recorded weekly. Results: Baseline attention was positively correlated with age (p \u3c .05), education (p \u3c .05), attendance (p \u3c .05), diet (p \u3c .05) and PA (p \u3c .05). Baseline executive control (p \u3c .05) and working memory (p \u3c .05) were each associated with % WL. Baseline executive control (p \u3c .01) and working memory (p \u3c .001) were also each associated with education. ANOVA indicated that baseline attention (p \u3c .01) was associated with WL, specifically for comparing those who achieved 5–10% WL (p \u3c .01) and those who achieved greater than 10% WL (p \u3c .01) to those who dropped. Significance: Results suggest that stronger baseline attention is associated with completion of a 3-mo. WL intervention. Executive control and working memory are associated with amount of WL achieved. NCT registration: US NIH Clinical Trials, NCT0166471

Physical activity screening to recruit inactive randomized controlled trial participants: how much is too much?

Citation: Vandelanotte, C., Stanton, R., Rebar, A. L., Van Itallie, A. K., Caperchione, C. M., Duncan, M. J., . . . Kolt, G. S. (2015). Physical activity screening to recruit inactive randomized controlled trial participants: how much is too much? Trials, 16, 3. doi:10.1186/s13063-015-0976-7Screening physical activity levels is common in trials to increase physical activity in inactive populations. Commonly applied single-item screening tools might not always be effective in identifying those who are inactive. We applied the more extensive Active Australia Survey to identify inactive people among those who had initially been misclassified as too active using a single-item measure. Those enrolled after the Active Australia Survey screening had significantly higher physical activity levels at subsequent baseline assessment. Thus, more extensive screening measures might result in the inclusion of participants who would otherwise be excluded, possibly introducing unwanted bias

Breathomics—exhaled volatile organic compound analysis to detect hepatic encephalopathy : a pilot study

he current diagnostic challenge with diagnosing hepatic encephalopathy (HE) is identifying those with minimal HE as opposed to the more clinically apparent covert/overt HE. Rifaximin, is an effective therapy but earlier identification and treatment of HE could prevent liver disease progression and hospitalization. Our pilot study aimed to analyse breath samples of patients with different HE grades, and controls, using a portable electronic (e) nose. 42 patients were enrolled; 22 with HE and 20 controls. Bedside breath samples were captured and analysed using an uvFAIMS machine (portable e-nose). West Haven criteria applied and MELD scores calculated. We classify HE patients from controls with a sensitivity and specificity of 0.88 (0.73-0.95) and 0.68 (0.51-0.81) respectively, AUROC 0.84 (0.75-0.93). Minimal HE was distinguishable from covert/overt HE with sensitivity of 0.79 and specificity of 0.5, AUROC 0.71 (0.57-0.84). This pilot study has highlighted the potential of breathomics to identify VOCs signatures in HE patients for diagnostic purposes. Importantly this was performed utilizing a non-invasive, portable bedside device and holds potential for future early HE diagnosis

Pituitary hCG production and cerebral tuberculosis mimicking disease progression during chemotherapy for an advanced ovarian germ cell tumour

<p>Abstract</p> <p>Background</p> <p>Ovarian germ cell tumours (OGCT) are rare but are usually curable with chemotherapy, even when presenting with advanced disease. The majority of OGCT produce the tumour markers, hCG and/or AFP which can be helpful in the diagnosis and monitoring the response to treatment.</p> <p>Case Presentation</p> <p>In this case of a 36 year old woman, the elevated hCG level at presentation was helpful in making a clinical diagnosis of OGCT in a patient too unwell to permit a tissue diagnosis.</p> <p>Cisplatin based combination chemotherapy produced an initial normalisation of the hCG level, but later in treatment the patient developed new cerebral lesions and a rising serum hCG suggestive of disease progression.</p> <p>Further investigations suggested that the CNS lesions were cerebral TB and that the low levels of hCG elevations was likely to be pituitary in origin. Chemotherapy treatment was continued along with anti-tuberculous therapy and 24 months after successful completion of therapy the patient remains disease free.</p> <p>Conclusions</p> <p>In the treatment of cancer patients it may be helpful to consider the potential non-malignant causes of new CNS lesions and that low hCG elevations may result from physiology rather than pathology in selected cases.</p

The Molonglo Reference Catalog 1-Jy radio source survey IV. Optical spectroscopy of a complete quasar sample

Optical spectroscopic data are presented here for quasars from the Molonglo Quasar Sample (MQS), which forms part of a complete survey of 1-Jy radio sources from the Molonglo Reference Catalogue. The combination of low-frequency selection and complete identifications means that the MQS is relatively free from the orientation biases which affect most other quasar samples. To date, the sample includes 105 quasars and 6 BL Lac objects, 106 of which have now been confirmed spectroscopically. This paper presents a homogenous set of low-resolution optical spectra for 79 MQS quasars, the majority of which have been obtained at the Anglo-Australian Telescope. Full observational details are given and redshifts, continuum and emission-line data tabulated for all confirmed quasars.Comment: 40 pages, ApJS in pres