Ontogenetic colour change in Oreophryne ezra (Anura: Microhylidae) reflects an unusual shift from conspicuousness to crypsis but not in toxicity

Ontogenetic colour change (OCC) may signal a switch in defensive strategies across development. Commonly, juveniles use cryptic colours and transition to conspicuous coloration as adults. Extensive theoretical and empirical work suggest such a transition is more likely than the converse. Oreophryne ezra, a newly discovered frog from New Guinea, however, undergoes OCC that belies expectations. We investigated the notion juveniles are aposematic while the adults use crypsis. We quantified the extent of conspicuousness of O. ezra across life stages using spectrophotometry and models of avian vision; and analysed skin extracts for the presence of toxic alkaloids. As predicted, the juvenile colour patterns were estimated to be conspicuous to likely predators against the frogs natural viewing backgrounds, while adults consistently fell below the threshold of discriminability. However, we discovered no alkaloids in either juveniles or adults. This suggests the juveniles use alternative defensive chemicals, or the colour pattern has an alternative origin – to which we offer the hypothesis that juvenile frogs may be Batesian mimics of a synoptic species of weevil. This study highlights the potential for this system, and others like it, to inform our understanding of the adaptive significance of OCC and the selective drivers for different anti-predatory strategies

Contact between the components of a knee prosthesis: numerical and experimental study

The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and experimentally. The interest in studying the contact area is related to the fact that the wear of the polyethylene insert, due to the high contact pressures, represents one of the major causes of failure of the total knee prosthesis. The possibility to evaluate the contact area at different loads and mutual position between femur and tibia is, therefore, of fundamental importance to study the service life of a prosthesis and to improve its performance. The finite element numerical approach has required the acquisition, through reverse engineering, and CAD modelling of the prosthetic components. Then the FEM simulations have been developed considering two different load conditions. In order to compare the calculated data, the same load configurations have been used for experimental tests based on ultrasonic method. In this case, some preliminary tests were required to calibrate the system depending on the particular characteristics of materials, geometries and surface finish of the prosthesis.The results show a good correlation between the data obtained with the two different approaches and, consequently, a good level of reliability of the procedures developed for the numerical and experimental evaluation of the contact area. The numerical procedure can be used to determine the area for different angles and loads, but especially in the design phase. The ultrasonic technique can be used to validate the numerical data

Contact between the components of a knee prosthesis: numerical and experimental study

The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and experimentally. The interest in studying the contact area is related to the fact that the wear of the polyethylene insert, due to the high contact pressures, represents one of the major causes of failure of the total knee prosthesis. The possibility to evaluate the contact area at different loads and mutual position between femur and tibia is, therefore, of fundamental importance to study the service life of a prosthesis and to improve its performance. The finite element numerical approach has required the acquisition, through reverse engineering, and CAD modelling of the prosthetic components. Then the FEM simulations have been developed considering two different load conditions. In order to compare the calculated data, the same load configurations have been used for experimental tests based on ultrasonic method. In this case, some preliminary tests were required to calibrate the system depending on the particular characteristics of materials, geometries and surface finish of the prosthesis.The results show a good correlation between the data obtained with the two different approaches and, consequently, a good level of reliability of the procedures developed for the numerical and experimental evaluation of the contact area. The numerical procedure can be used to determine the area for different angles and loads, but especially in the design phase. The ultrasonic technique can be used to validate the numerical data

An update of the evolving epidemic of blaKPC carrying Klebsiella pneumoniae in Sicily, Italy, 2014: Emergence of multiple Non-ST258 Clones

Background: In Italy, Klebsiella pneumoniae carbapenemase producing K. pneumoniae (KPC-Kp) strains are highly endemic and KPC producing CC258 is reported as the widely predominating clone. In Palermo, Italy, previous reports have confirmed this pattern. However, recent preliminary findings suggest that an epidemiological change is likely ongoing towards a polyclonal KPC-Kp spread. Here we present the results of molecular typing of 94 carbapenem non susceptible K. pneumoniae isolates detected during 2014 in the three different hospitals in Palermo, Italy. Methods and Results: Ninety-four consecutive, non replicate carbapenem non susceptible isolates were identified in the three largest acute general hospitals in Palermo, Italy, in the six-month period March-August 2014. They were characterized by PCR for β-lactam, aminoglycoside and plasmid mediated fluoroquinolone resistance genetic determinants. The mgrB gene of the colistin resistant isolates was amplified and sequenced. Clonality was assessed by pulsed field gel electrophoresis and multilocus sequence typing. Eight non-CC258 sequence types (STs) were identified accounting for 60% of isolates. In particular, ST307 and ST273 accounted for 29% and 18% of isolates. CC258 isolates were more frequently susceptible to gentamicin and non-CC258 isolates to amikacin. Colistin non susceptibility was found in 42% of isolates. Modifications of mgrB were found in 32 isolates. Conclusions: Concurrent clonal expansion of some STs and lateral transmission of genetic resistance determinants are likely producing a thorough change of the KPC-Kp epidemiology in Palermo, Italy. In our setting mgrB inactivation proved to substantially contribute to colistin resistance. Our findings suggest the need to continuously monitor the KPC-Kp epidemiology and to assess by a nationwide survey the possible shifting towards a polyclonal epidemic

Serological screening for Leishmania infantum in asymptomatic blood donors living in an endemic area (Sicily, Italy)

The purpose of our study was to assess whether Leishmania infantum parasitemia occurs in asymptomatic Leishmania-seropositive subjects. Samples from 500 blood donors were tested using an enzyme-linked immunosorbent assay (ELISA). Anti-Leishmania antibodies were not found in any sample. Our findings suggest that the risk of L. infantum transmission by blood transfusion in Sicily is very low

An update of the evolving epidemic of blaKPC carrying Klebsiella pneumoniae in Sicily, Italy, 2014: Emergence of multiple Non-ST258 Clones

Background: In Italy, Klebsiella pneumoniae carbapenemase producing K. pneumoniae (KPC-Kp) strains are highly endemic and KPC producing CC258 is reported as the widely predominating clone. In Palermo, Italy, previous reports have confirmed this pattern. However, recent preliminary findings suggest that an epidemiological change is likely ongoing towards a polyclonal KPC-Kp spread. Here we present the results of molecular typing of 94 carbapenem non susceptible K. pneumoniae isolates detected during 2014 in the three different hospitals in Palermo, Italy. Methods and Results: Ninety-four consecutive, non replicate carbapenem non susceptible isolates were identified in the three largest acute general hospitals in Palermo, Italy, in the six-month period March-August 2014. They were characterized by PCR for β-lactam, aminoglycoside and plasmid mediated fluoroquinolone resistance genetic determinants. The mgrB gene of the colistin resistant isolates was amplified and sequenced. Clonality was assessed by pulsed field gel electrophoresis and multilocus sequence typing. Eight non-CC258 sequence types (STs) were identified accounting for 60% of isolates. In particular, ST307 and ST273 accounted for 29% and 18% of isolates. CC258 isolates were more frequently susceptible to gentamicin and non-CC258 isolates to amikacin. Colistin non susceptibility was found in 42% of isolates. Modifications of mgrB were found in 32 isolates. Conclusions: Concurrent clonal expansion of some STs and lateral transmission of genetic resistance determinants are likely producing a thorough change of the KPC-Kp epidemiology in Palermo, Italy. In our setting mgrB inactivation proved to substantially contribute to colistin resistance. Our findings suggest the need to continuously monitor the KPC-Kp epidemiology and to assess by a nationwide survey the possible shifting towards a polyclonal epidemic

PROGETTO LIFE11 ENV IT 215 RESILFORMED - RESILIENZA AL CAMBIAMENTO CLIMATICO NELLE FORESTE MEDITERRANEE

Le condizioni climatiche delle regioni mediterranee, caratterizzate da frequenti annate siccitose, contribuiscono all’indebolimento degli ecosistemi forestali. Come risultato le foreste riducono le loro capacità produttive e sono più soggette a fenomeni di degrado secondario. Inoltre i contesti economico-sociali possono acuire il degrado con la diffusione di uno scorretto uso della risorsa (tagli boschivi, pascolamento) e con la diffusione degli incendi boschivi. L’obiettivo generale del progetto è preservare i sistemi forestali in ambiente mediterraneo dai rischi derivanti dai cambiamenti climatici, tramite processi di naturalizzazione, aumento di biodiversità e migliorata reattività, nei processi di recupero, in seguito ad eventi destabilizzanti. Obiettivo specifico è implementare una politica forestale regionale in grado di aumentare la capacità di resilienza delle foreste siciliane, migliorandone l’efficienza ecosistemica e favorendo la salvaguardia della biodiversità. Tra le azioni principali previste dal progetto, che si concluderà alla fine del 2015, si possono citare la classificazione delle categorie forestali siciliane in funzione della sensibilità alla desertificazione, l’indagine diacronica sull’uso e copertura del suolo dei principali paesaggi forestali siciliani, la definizione di prassi selvicolturali specifiche; la realizzazione di 120 ettari di interventi dimostrativi in 6 aree della Sicilia; la realizzazione di 6 piani di indirizzo forestali attraverso processi partecipativi con le popolazioni locali. Nella fase finale del progetto è prevista l’implementazione delle linee strategiche sperimentate con ResilForMed nel Piano Forestale Regionale della Sicilia

Is the monoclonal spread of the ST258, KPC-3-producing clone being replaced in southern Italy by the dissemination of multiple clones of carbapenem nonsusceptible, KPC-3-producing Klebsiella pneumoniae?

Spread of carbapenemase-producing Klebsiella pneumoniae has been identified as an issue of serious worldwide concern from clinical and public health perspectives. Italy is an country endemic for and a reservoir of K. pneumoniae carbapenemases (KPC). Nineteen isolates of CR-Kp from 16 different patients admitted in two hospital of Palermo in the period April-May 2014 were studied. Seven of 16 isolates belonged to ST307, six to ST258 and three to ST273. All isolates were KPC-3 producers. Our data emphasize the increasing difficulties in controlling the spread of KPC-K

Chrysomelidial in the Opisthonotal Glands of the Oribatid Mite, Oribotritia berlesei

Gas chromatographic–mass spectrometric analyses of whole body extracts of Oribotritia berlesei, a large-sized soil-dwelling oribatid mite, revealed a consistent chemical pattern of ten components, probably originating from the well-developed opisthonotal glands. The three major components of the extract were the iridoid monoterpene, (3S,8S)-chrysomelidial (about 45% of the extract), the unsaturated hydrocarbon 6,9-heptadecadiene, and the diterpene β-springene (the latter two, each about 20–25% of the extract). The remaining minor components (together about 10% of the extract) included a series of hydrocarbons (tridecene, tridecane, pentadecene, pentadecane, 8-heptadecene, and heptadecane) and the tentatively identified 9,17-octadecadienal. In contrast, analysis of juveniles showed only two compounds, namely a 2:1 mixture of (3S,8S)-chrysomelidial and its epimer, epi-chrysomelidial (3S,8R-chrysomelidial). Unexpectedly, neither adult nor juvenile secretions contained the so-called astigmatid compounds, which are considered characteristic of secretions of oribatids above moderately derived Mixonomata. The chrysomelidials, as well as β-springene and octadecadienal, are newly identified compounds in the opisthonotal glands of oribatid mites and have chemotaxonomic potential for this group. This is the first instance of finding chrysomelidials outside the Coleoptera

Spinal cord grey matter segmentation challenge

An important image processing step in spinal cord magnetic resonance imaging is the ability to reliably and accurately segment grey and white matter for tissue specific analysis. There are several semi- or fully-automated segmentation methods for cervical cord cross-sectional area measurement with an excellent performance close or equal to the manual segmentation. However, grey matter segmentation is still challenging due to small cross-sectional size and shape, and active research is being conducted by several groups around the world in this field. Therefore a grey matter spinal cord segmentation challenge was organised to test different capabilities of various methods using the same multi-centre and multi-vendor dataset acquired with distinct 3D gradient-echo sequences. This challenge aimed to characterize the state-of-the-art in the field as well as identifying new opportunities for future improvements. Six different spinal cord grey matter segmentation methods developed independently by various research groups across the world and their performance were compared to manual segmentation outcomes, the present gold-standard. All algorithms provided good overall results for detecting the grey matter butterfly, albeit with variable performance in certain quality-of-segmentation metrics. The data have been made publicly available and the challenge web site remains open to new submissions. No modifications were introduced to any of the presented methods as a result of this challenge for the purposes of this publication