1,830 research outputs found
An exact solution of the inelastic Boltzmann equation for the Couette flow with uniform heat flux
In the steady Couette flow of a granular gas the sign of the heat flux
gradient is governed by the competition between viscous heating and inelastic
cooling. We show from the Boltzmann equation for inelastic Maxwell particles
that a special class of states exists where the viscous heating and the
inelastic cooling exactly compensate each other at every point, resulting in a
uniform heat flux. In this state the (reduced) shear rate is enslaved to the
coefficient of restitution , so that the only free parameter is the
(reduced) thermal gradient . It turns out that the reduced moments of
order are polynomials of degree in , with coefficients that
are nonlinear functions of . In particular, the rheological properties
() are independent of and coincide exactly with those of the
simple shear flow. The heat flux () is linear in the thermal gradient
(generalized Fourier's law), but with an effective thermal conductivity
differing from the Navier--Stokes one. In addition, a heat flux component
parallel to the flow velocity and normal to the thermal gradient exists. The
theoretical predictions are validated by comparison with direct Monte Carlo
simulations for the same model.Comment: 16 pages, 4 figures,1 table; v2: minor change
Bose-Einstein condensate collapse: a comparison between theory and experiment
We solve the Gross-Pitaevskii equation numerically for the collapse induced
by a switch from positive to negative scattering lengths. We compare our
results with experiments performed at JILA with Bose-Einstein condensates of
Rb-85, in which the scattering length was controlled using a Feshbach
resonance. Building on previous theoretical work we identify quantitative
differences between the predictions of mean-field theory and the results of the
experiments. Besides the previously reported difference between the predicted
and observed critical atom number for collapse, we also find that the predicted
collapse times systematically exceed those observed experimentally. Quantum
field effects, such as fragmentation, that might account for these
discrepancies are discussed.Comment: 4 pages, 2 figure
Collisional rates for the inelastic Maxwell model: application to the divergence of anisotropic high-order velocity moments in the homogeneous cooling state
The collisional rates associated with the isotropic velocity moments
and
are exactly derived in the case of the
inelastic Maxwell model as functions of the exponent , the coefficient of
restitution , and the dimensionality . The results are applied to
the evolution of the moments in the homogeneous free cooling state. It is found
that, at a given value of , not only the isotropic moments of a degree
higher than a certain value diverge but also the anisotropic moments do. This
implies that, while the scaled distribution function has been proven in the
literature to converge to the isotropic self-similar solution in well-defined
mathematical terms, nonzero initial anisotropic moments do not decay with time.
On the other hand, our results show that the ratio between an anisotropic
moment and the isotropic moment of the same degree tends to zero.Comment: 7 pages, 2 figures; v2: clarification of some mathematical statements
and addition of 7 new references; v3: Published in "Special Issue: Isaac
Goldhirsch - A Pioneer of Granular Matter Theory
Soldagem Por Atrito Com Pino Não Consumível De Aços Inoxidáveis Duplexa
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Duplex stainless steels are successful in a variety of applications such as the food industry, petrochemical and plants for desalination of seawater, where high corrosion resistance and high mechanical strength are required. However, the beneficial microstructure may be change during fusion welding steps and it can compromise the performance of these materials. Friction stir welding is a solid state process avoiding typical problems concerning solidification such as solidification cracks, liquation and segregation of alloying elements. For superduplex stainless steels can avoid unbalanced proportions of ferrite and austenite, formation of secondary deleterious phases and grain growth of ferrite in the heat affected zone. Consolidated friction stir welded joints with full penetration of 6 mm thick were obtained for UNS S32101 and S32205 duplex and S32750 and S32760 superduplex stainless steels. The friction stir welds were submitted to tensile tests indicating an improvement of strength in welded joints showing increased of yield and tensile strength for all studied cases. Regarding the microstructural characterization, an outstanding gran refinement was observed in the welded joint achieving grain sizes as small as 1 μm. This refinement was associated with the combination of microstructural restoration mechanisms in the dual phase microstructure promoted by severe deformation associated with a high temperature during the welding process. © 2016, Universidade Federal de Uberlandia. All rights reserved.2115969CNPq, Conselho Nacional de Desenvolvimento Científico e TecnológicoFAPESP, Fundação de Amparo à Pesquisa do Estado de São PauloConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP
Induced Force Hovering of Spherical Robot by Under-Actuated Control of Dual Rotor
This chapter discusses the design and modelling of a spherical flying robot. The main objective is to control its hovering and omnidirectional mobility by controlling the air mass differential pressure between two asynchronous coaxial rotors that are aligned collinearly. The spherical robot design has embedded a gyroscopic mechanism of three rings that allow the rotors’ under-actuated mobility with 3DOF. The main objective of this study is to maintain the thrust force with nearly vertical direction. The change in pressure between rotors allows to vary the rotors’ tilt and pitch. The system uses special design propellers to improve the laminar air mass flux. A nonlinear fitting model automatically calibrates the rotors’ angular speed as a function of digital values. This model is the functional form that represents the reference input to control the rotors’ speed, validated by three types controllers: P, PI, and PID. The robot’s thrust and induced forces and flight mechanics are proposed and analysed. The simulation results show the feasibility of the approach
Moluscos aquáticos do Estado de Rondônia (Brasil), com especial referência ao gênero Biomphalaria Preston, 1910 (Pulmonata, Planorbidae)
A malacological survey was carried in the State of Rondônia, Brazil, in order to establish the geographical distribution of aquatic mollusks with special emphasis on the genera Biomphalaria. Eleven counties along the BR-364 highway were studied, totaling 162 limnic ecossistems, of which 77 (48%) were positive for at least one species of mollusk. The following species were found: Gastropoda, Planorbidae: Biomphalaria sp., B. amazônica, B. occidentalis, Drepanotrema anatinum, D. lucidum, D. depressissimum and D. cimex; Physidae: Stenophysa marmorata; Ancylidae: Gundlachia sp.; Thiariidae: Aylacostoma sp.; Ampullariidae: Pomacea sp.; Pelecypoda, Sphaeriidae: Eupera primei and Pisidium sp.. New geographical data are given and the epidemiological importance of these findings are discussed.Foi realizado no Estado de Rondônia, Brasil, levantamento malacológico com o objetivo de estabelecer a distribuição geográfica dos moluscos aquáticos, com ênfase especial no gênero Biomphalaria. Foram pesquisados 11 municípios ao longo da rodovia BR-364, totalizando 162 ecossistemas límnicos, dos quais 77 (48%) apresentaram-se positivos para, pelo menos, uma espécie de molusco. As seguintes espécies foram encotradas: Gastropoda, Planorbidae: Biomphalaria sp., B.amazônica, B.occidentalis, Drepanotrema cimex, D.anatinum, D.lucidum e D.depressissimum; Physidae: Stenophysa marmorata; Ancylidae: Gundlachia sp.; Thiaridae: Aylacostoma sp.; Ampullaridae: Pomacea sp.; Pelecypoda, Sphaeriidae: Eupera primei e Pisidium sp. São apresentados dados de distribuição geográfica e discutida a importância epidemiológica dos achados
Soil organisms in organic and conventional cropping systems.
Apesar do crescente interesse pela agricultura orgânica, são poucas as informações de pesquisa disponíveis sobre o assunto. Assim, num Argissolo Vermelho-Amarelo distrófico foram comparados os efeitos de sistemas de cultivo orgânico e convencional, para as culturas do tomate (Lycopersicum esculentum) e do milho (Zea mays), sobre a comunidade de organismos do solo e suas atividades. As populações de fungos,bactérias e actinomicetos, determinadas pela contagem de colônias em meio de cultura, foram semelhantes para os dois sistemas de produção. A atividade microbiana, avaliada pela evolução de CO2, manteve-se superior no sistema orgânico, sendo que em determinadas avaliações foi o dobro da evolução verificada no sistema convencional. O número de espécimes de minhoca foi praticamente dez vezes maior no sistema orgânico. Não foi observada diferença na taxa de decomposição de matéria orgânica entre os dois sistemas. De modo geral, o número de indivíduos de microartrópodos foi superior no sistema orgânico do que no sistema convencional, refletindo no maior índice de diversidade de Shannon. As maiores populações de insetos foram as da ordem Collembola, enquanto para os ácaros a maior população foi a da superfamília Oribatuloidea. Indivíduos dos grupos Aranae, Chilopoda, Dyplopoda, Pauropoda, Protura e Symphyla foram ocasionalmente coletados e de forma similar entre os sistemas
Collapse dynamics of trapped Bose-Einstein condensates
We analyze the implosion and subsequent explosion of a trapped condensate
after the scattering length is switched to a negative value. Our results
compare very well qualitatively and fairly well quantitatively with the results
of recent experiments at JILA.Comment: 4 pages, 3 figure
Andrological, pathologic, morphometric, and ultrasonographic findings in rams experimentally infected with Brucella ovis
AbstractBrucella ovis is considered the most important infectious cause of reproductive disorders in sheep. The disease is characterized by epididymitis, subfertility and infertility in rams. B. ovis occasionally results in abortion in ewes, as well. The aim of this study was to evaluate kinetic changes in the reproductive organs of rams experimentally infected with B. ovis. Nine rams were experimentally inoculated intrapreputially with 2mL of a suspension containing 1.2×109CFU (colony-forming units)/mL of B. ovis (strain ATCC25840). In addition, 50μL of a suspension containing 1.2×1010CFU/mL of the same B. ovis strain was inoculated into each conjunctival sac, resulting in 3.6×109CFU total per ram. Six of nine infected rams had developed clinical changes in the tail of the epididymis at 30 days post-infection (dpi), but these changes regressed in 50% of these rams. Ultrasound demonstrated an increase in the area of the tail of the epididymis (P<0.001), reduction in the area of the testes (P<0.001), and an increased length and width of the seminal vesicles (P<0.001) during the course of infection. A sperm granuloma was diagnosed on the basis of ultrasonography findings. Microscopically, there was epididymitis, testicular degeneration, and seminal vesiculitis. Inflammatory cells were detected in the semen even before the development of epididymitis. Moreover, inflammatory cells were also found in the semen of asymptomatic rams, indicating that the presence of leukocytes in the ejaculate is a valuable method for screening potential carriers of infections in the genital tract
- …