4,550 research outputs found
Processing and functional properties of bovine plasma
A powdered product that was light in colour and had no off
flavour or odour was made by the separation, ultrafiltration
and spray drying of bovine blood. To establish the variability
of the production methods samples were taken at stages during
processing. A one year stability trial on one batch of powder
was also done. Samples were analysed to indicate their physical
characteristics, approximate composition and microbiological
content. Model systems were established and used to assess the
functional properties of the powder. Ten bovine plasma powders
were produced with little indication of variation between batches.
The powder was stable. [Continues.
Characterization of Cohesive Cake Formation and Stickiness of Starches at Various Water Levels in the Presence of Palm oil and Palm Oil Fractions
A key feature of the biscuit manufacture is the combination of the raw ingredients. Different oils are likely to change the quality of dough. The factors important in agglomeration of starch materials are poorly understood and therefore work was carried out to try and establish the behaviour of oil and water on the material properties of starches. An understanding of particle-particle behaviour in the presence of oils and water is relevant to a food production process such as biscuit making, that requires preparation and mixing of these ingredients at ambient conditions. The way these powders pack and flow could have a significant impact on the final quality of the product. Powder flow analyser was used to measure the caking and cohesion properties for different type of starches. Besides the powder type as a variable, three levels of water and four types of oils at 5 % (d.b) concentration were also tested. The presence of water with the powder plays an important role for the way the cereals powders pack and flow. Although tapped bulk densities did not vary much the water had a great impact on the powder caking strength and cohesion index. For samples without oil, the results showed that these parameters were increased significantly as the water level increased for all starches. Plasticization by addition of water to the food powder is believed to be the major factor contributing to the results obtained. Addition of oil to starches increased the caking and cohesion indices where liquid oils showed the greatest impact compared to solid oils
Effect of ingredients on the mass loss, pasting properties and thermal profile of semi-sweet biscuit dough
The drive to utilise different lipids, both for health benefits and for commercial reasons, in bakery goods has been extensive. However, the roles of the lipid plays in many products, let alone the influence of the level of saturation, are uncertain. The objective of work carried out is to understand how the typical ingredients in biscuit would impact on the thermal profile of semi-sweet biscuit dough. Three different techniques have been used namely gravimetric analysis (TGA), rapid visco analyser and differential scanning calorimetry (DSC). Wheat flour, sugar and fat/oil were the main ingredients used to produce basic dough of semi-sweet biscuit for this study. Semi-sweet biscuit dough formulations with varying types of oils namely palm oil, palm olein, palm stearine, sunflower oil and butterfat were developed. The final mass (i.e. the total amount of moisture lost) for the samples showed significant differences between the doughs; with the control dough, dough contained palm stearine and butter falling into one group and the butter, palm oil, palm olein and sunflower oil forming the second group that showed less mass loss. Doughs containing low levels of saturated fatty acids (palm olein, palm oil and sunflower oil) showed significant difference on the drying properties of samples compared to doughs containing high saturated fatty acids (palm stearine and butter) as revealed by TGA. Pasting properties result showed that oil with different saturation influenced peak viscosity obtained. The DSC results showed that sugar and oil increased the gelatinisation peak temperature up to 2 and 6 °C, respectively. Oils with low saturated fatty acids have more capability to make contact with starch granules during the mixing processing as compared to oil with a high level of saturated fat. It is suggested that the oil presence in the system was delaying the drying process by coating the wheat flour particles hence slowing the drying process as compared to a sample without oil
Non-chemically modified waxy rice starch stabilised wow emulsions for salt reduction
Water-in-oil-in-water emulsions containing an internalised salt solution were stabilised with non-chemically modified waxy rice starch (WRS), and octinyl succinic anhydride (OSA) as reference, to release salt during oral processing due to amylase-induced destabilisation. Salt levels were 1.5 g salt and 0.47 g salt per 100 g external and internal aqueous phases, respectively. Variables were the starch content (2, 3, 4 g per 100 g emulsion; 20 g oil per 100 g emulsion), level of polyglycerol polyricinoleate (PGPR) as a lipophilic emulsifier (0.29, 0.57 g per 100 g emulsion) and ambient-pressure processing temperature for WRS gelatinisation, the non-chemical modification process, (75 ± 3, 88 ± 5 °C). OSA starch was used under previously applied conditions (2, 3, 4 g starch, 0.57 g PGPR per 100 g emulsion, 25 ± 5 °C). Emulsions were stable for three months, except OSA and lower level PGPR low temperature processed WRS emulsions lost salt into the external emulsion phase. One day after processing, encapsulation efficiency (EE) was as predicted from the composition for OSA emulsions, while at the same PGPR content an external aqueous phase was incorporated into the oil droplets of the WRS emulsion increasing EE. Salt release was assessed in vitro and through sensory evaluation using paired comparison testing. The results revealed that the efficacy of this salt reduction approach was enhanced for gelatinised WRS compared to OSA starch stabilised emulsions. Consumer tests on a tomato soup, to validate this salt reduction approach for a real food, revealed a possible 25% salt reduction, compared to current UK products
Shear rheology and filament stretching behaviour of xanthan gum and carboxymethyl cellulose solution in presence of saliva
The objective of the work reported in this paper is to determine if saliva addition has an effect on the rheology of xanthan gum solutions. The reasons for the interest was that it has been previously reported that flavour release from high viscosity xanthan thickened foods is not reduced in the same way as foods thickened by other hydrocolloids at comparable viscosities. It was previously postulated that this could be due to an interaction between saliva and xanthan that could change the microstructure and rheology of xanthan solutions. In this work the effect of saliva on the rheology of CMC and xanthan solutions was compared. Solutions of molecularly dissolved xanthan gum and CMC mixed with water or human whole saliva at a ratio of 5:1 showed little impact of the presence of saliva on steady shear or dynamic viscosity for the two hydrocolloids. In filament thinning experiments saliva addition significantly increased filament break-up time for xanthan gum while it had little effect on the break-up time of the CMC filament. Also, filament thinning appeared a lot less even and was not as reproducible in the case of xanthan gum. Addition of CMC and hydroxypropyl methylcellulose (HPMC) to xanthan gum solutions showed a similar increase in break-up time to saliva, but to see this effect the viscosity of the added CMC or HPMC solution had to be very much higher than the viscosity of saliva. The results are discussed in the context of the structure of xanthan gum and the reported extensional rheology of saliva
Understanding the direct and indirect mechanisms of xylanase action on starch digestion in broilers
The objective of the current study was to investigate the mechanisms of xylanase action in a maize-soya diet and its effect on starch digestion. A total of 60 broilers were divided into 6 treatment groups; a control group without xylanase, and five other groups supplemented with xylanase (Econase XT 25; 100 g/t) from 1, 2, 3, 4 or 5 weeks before slaughter. At the end of the experiment, digesta was collected from the gizzard, upper and lower small intestine, and both caeca. Digesta pH ranged from pH 2.2-4.4, 5.9-6.6, 6.7-7.8 and 5.7-7.3 in the gizzard, upper small intestine, lower small intestine, and both caeca, respectively, with no effect of xylanase (P > 0.05). Scanning Electron Microscope (SEM) images along with total starch measurements showed the progression of starch digestion through the tract. The SEM did not show any greater disruption to cell wall material with xylanase supplementation. This suggests that xylanase was not working directly on the cell wall and provides evidence for the hypothesis that xylanase works through an indirect mechanism. Peptide YY (PYY) concentration in the blood was higher during the first few weeks of supplementation, with longer periods of supplementation nulling this effect, implying that xylanase may be acting through a prebiotic mechanism. The RT-q PCR results revealed a numerical increase in glucose transporter (GLUT2 and SGLT1) expression at 2 and 3 weeks of xylanase supplementation, respectively, which might suggest a greater absorption capacity of birds. From these results, a potential mechanism of xylanase action in maize-based diets has been proposed
Effect of granule organisation on the behaviour of starches in the NMMO (N-methyl morpholine N-oxide) solvent system
The response of starches of different botanical origin to heating in 78% N-methyl morpholine N-oxide (NMMO) is compared with their behaviour in water. For all starches studied an exothermic transition is obtained in the NMMO system rather than the endothermic transition in water. In NMMO the transition temperatures are lower for A-type starches (wheat, rice and tapioca) than the C-type starches (sago and pea) and also potato which has a B-type polymorph. Observations using a hot stage microscope show two different types of initial behaviour in NMMO; erosion of the granule from the surface or disruption into fragments. In both cases the final outcome is dissolution but for the most resistant C-type starches (pea and sago) some intact granules could be seen following heating at 95 °C in 78% NMMO and subsequent precipitation in ethanol. The results are discussed in terms of what is known from previous structural studies on these six starches and the behaviour of maize starch in NMMO and ionic liquids. The work is relevant to the co-dissolution of starch and cellulose to form novel polysaccharide based materials
Potent selective inhibitors of protein kinase C
AbstractA series of potent, selective inhibitors of protein kinase C has been derived from the structural lead provided by the microbial broth products, staurosporine and K252a. Our inhibitors block PCK in intact cells (platelets and T cells), and prevent the proliferation of mononuclear cells in response to interleukin 2 (IL2)
Lamb meat quality assessment by support vector machines
The correct assessment of meat quality (i.e., to fulfill the consumer's needs) is crucial element within the meat industry. Although there are several factors that affect the perception of taste,
tenderness is considered the most important characteristic. In this paper, a Feature Selection procedure, based on a Sensitivity Analysis, is combined with a Support Vector Machine, in order to predict lamb meat tenderness. This real-world problem is defined in terms of two difficult regression tasks, by modeling objective (e.g. Warner-Bratzler Shear force) and subjective (e.g. human taste panel) measurements. In both cases, the proposed solution is competitive when compared with other neural (e.g. Multilayer Perceptron) and Multiple Regression approaches
- …