78 research outputs found
Dodging magic bullets : The evolution of bacterial antibiotic resistance
Antibiotic-resistant bacteria currently represent one of the main public health problems and recent predictions indicate that they will soon become the world?s leading cause of death. The ill-fated journey from the introduction of antibiotics into clinical practice to the current threat of a post-antibiotic era has run its course in just a few decades. Thus, the evolution of antibiotic resistance is probably the most spectacular example of evolution of a biological system innovation that we have had the opportunity to observe in real time. This text discusses some of the evolutionary and molecular keys that have allowed bacteria to go down this path
Rapid thermally annealed plasma deposited SiNx : H thin films: Application to metal-insulator-semiconductor structures with Si, In0.53Ga0.47As, and InP
We present in this article a comprehensive study of rapid thermal annealing (RTA) effects on the physical properties of SiNx:H thin films deposited by the electron cyclotron resonance plasma method. Films of different as-deposited compositions (defined in this article as the nitrogen to silicon ratio, x=N/Si) were analyzed: from Si-rich (x=0.97) to N-rich (x=1.6) films. The evolution of the composition, bonding configuration, and paramagnetic defects with the annealing temperature are explained by means of different network bond reactions that take place depending on the as-deposited film composition. All the analyzed films release hydrogen, while Si-rich and near-stoichiometric (x=1.43) ones also lose nitrogen upon annealing. These films were used to make Al/SiNx:H/semiconductor devices with Si, In0.53Ga0.47As, and InP. After RTA treatments, the electrical properties of the three different SiNx:H/semiconductor interfaces can be explained, noting the microstructural modifications that SiNx:H experiences upon annealing
Optical and structural properties of SiOxNyHz films deposited by electron cyclotron resonance and their correlation with composition
SiOxNyHz films were deposited from O-2, N-2, and SiH4 gas mixtures at room temperature using the electron cyclotron resonance plasma method. The absolute concentrations of all the species present in the films (Si, O, N, and H) were measured with high precision by heavy-ion elastic recoil detection analysis. The composition of the films was controlled over the whole composition range by adjusting the precursor-gases flow ratio during deposition. The relative incorporation of O and N is determined by the ratio Q = phi(O-2)/(phi(SiH4) and the relative content of Si is determined by R =[phi(O-2)+phi(N-2)]/phi(SiH4) where phi(SiH4), phi(O-2), and phi(N-2) are the SiH4, O-2, and N-2 gas flows, respectively. The optical properties (infrared absorption and refractive index) and the density of paramagnetic defects were analyzed in dependence on the film composition. Single-phase homogeneous films were obtained at low SiH4 partial pressure during deposition; while those samples deposited at high SiH4 partial pressure show evidence of separation of two phases. The refractive index was controlled over the whole range between silicon nitride and silicon oxide, with values slightly lower than in stoichiometric films due to the incorporation of H, which results in a lower density of the films. The most important paramagnetic defects detected in the films were the K center and the E' center. Defects related to N were also detected in some samples. The total density of defects in SiOxNyHz films was higher than in SiO2 and lower than in silicon nitride films
Thermally induced modifications on bonding configuration and density of defects of plasma deposited SiOx : H films
The bonding configuration, hydrogen evolution, and defect content of rapid thermally annealed (RTA) SiOx:H films of different compositions were studied. Infrared absorption measurements showed that all the hydrogen present in the films is lost at annealing temperatures below 600 degreesC without any change in the oxygen to silicon ratio of the films. The activation energy of the hydrogen release is in the 0.21-0.41 eV range independently of film composition, suggesting that the process occurs via network bond reactions. For annealing temperatures higher than 700 degreesC, a change in the Si-O-Si stretching wave number from the initial unannealed value to the 1070-1080 cm(-1) range was promoted, independently of the initial film composition. Electron spin resonance measurements showed that all the films contain two type of bulk paramagnetic defects: the E-' center (.Si=O-3) and the silicon dangling bond center (.Si=Si-3). The RTA process promotes a general decrease of defect concentration for annealing temperatures below 400 degreesC. At higher temperatures, E' center disappears, and the .Si=Si-3 center increases its concentration up to the 10(17)-10(18) cm(-3) range. This suggests that the RTA at higher temperatures promotes the formation of a high-quality, almost defect-free, SiO2 matrix in which highly defective Si nanocrystals are also formed, where the .Si=Si-3 centers are located
Microstructural modifications induced by rapid thermal annealing in plasma deposited SiOxNyHz films
The effect of rapid thermal annealing (RTA) processes on the structural properties of SiOxNyHz films was investigated. The samples were deposited by the electron cyclotron resonance plasma method, using SiH4, O-2 and N-2 as precursor gases. For SiOxNyHz films with composition close to that of SiO2, which have a very low H content, RTA induces thermal relaxation of the lattice and improvement of the structural order. For films of intermediate composition and of compositions close to SiNyHz, the main effect of RTA is the release of H at high temperatures (T>700degreesC). This H release is more significant in films containing both Si-H and N-H bonds, due to cooperative reactions between both kinds of bonds. In these films the degradation of structural order associated to H release prevails over thermal relaxation, while in those films with only N-H bonds, thermal relaxation predominates. For annealing temperatures in the 500-700degreesC range, the passivation of dangling bonds by the nonbonded H in the films and the transition from the paramagnetic state to the diamagnetic state of the K center result in a decrease of the density of paramagnetic defects. The H release observed at high annealing temperatures is accompanied by an increase of density of paramagnetic defects
Culturable aerobic and facultative bacteria from the gut of the polyphagic dung beetle Thorectes lusitanicus Jeckel
Unlike other dung beetles, the Iberian geotrupid Thorectes lusitanicus exhibits polyphagous behavior; for example, it is able to eat acorns, fungi, fruits, and carrion in addition to the dung of different mammals. This adaptation to digest a wider diet has physiological and developmental advantages and requires key changes in the composition and diversity of the beetle's gut microbiota. In this study, we isolated aerobic, facultative anaerobic, and aerotolerant microbiota amenable to grow in culture from the gut contents of T. lusitanicus and resolved isolate identity to the species level by sequencing 16S rRNA gene fragments. Using BLAST similarity searches and maximum likelihood phylogenetic analyses, we were able to reveal that the analyzed fraction (culturable, aerobic, facultative anaerobic, and aerotolerant) of beetle gut microbiota is dominated by the phyla Proteobacteria, Firmicutes and Actinobacteria. Among Proteobacteria, members of the order Enterobacteriales (Gammaproteobacteria) were the most abundant. The main functions associated with the bacteria found in the gut of T. lusitanicus would likely include nitrogen fixation, denitrification, detoxification, and diverse defensive roles against pathogens.This study was supported by the project 065/2002 of the Ministry of Environment, and the projects “Thorbellota” (CGL2008/03878/BOS) and “NiTerDist” (CGL2011-515 25544) of the Secretaría de Estado de Investigación, Desarrollo e Innovación
Si oxidation processes by electron cyclotron resonance plasmas
National Congress of Materials (7. 2002. Madrid). © Sociedad Española de Cerámica y Vidrio, Consejo Superior de Investigaciones Científicas. Licencia Creative Commons 3.0 España (by-nc). Los autores agradecen al C.A.I. de Implantación Iónica (U.C.M.) por las labores técnicas de apoyo, y al C.A.I. de Espectroscopía (U.C.M.) por la disponibilidad del espectrómetro FTIR. Éste trabajo fue parcialmente financiado por el CICYT bajo contrato TIC 01‑1253.Se han fabricado estructuras MIS sobre Si (100) mediante un proceso en dos pasos: una primera exposición del sustrato de Si a un plasma ECR de oxígeno, que da lugar a la obtención de una capa de SiOx (en adelante PO-SiOx), seguido de un depósito de nitruro de silicio (SiN1.55:H) mediante plasma ECR. La estructura MIS resultante es de la forma Al/SiN1.55:H/PO‑SiOx/Si. Los dispositivos han sido caracterizados mediante la medida simultánea de las capacidades a alta y baja frecuencia, lo que permite conocer la calidad de la intercara PO‑SiOx/Si, calcular los espesores de la capa de PO‑SiOx y la velocidad de crecimiento del SiNx:H. Para caracterizar el proceso de oxidación se realizaron varias series de muestras variando en cada una un parámetro del proceso. Estos parámetros fueron: el tiempo de depósito del SiNx:H, el tiempo de oxidación, la temperatura del sustrato y el flujo total de O2. Asimismo, se ha estudiado la estructura de enlaces del dieléctrico apilado mediante espectroscopia infrarroja. El espectro del dieléctrico apilado mostró la superposición de dos picos: uno de menor intensidad asociado al PO‑SiOx con el máximo en 1056 cm-1, y otro debido al SiN1.55:H con máximo en 860 cm-1. Estas medidas mostraron que la ley que rige el crecimiento del PO‑SiOx es dSiO = 2.7 tox 0.26 nm donde dSiO es el espesor de la capa de PO-SiOx y tox es el tiempo de oxidación en min. Por lo que respecta a las características eléctricas, las estructuras presentaron mínimos de la densidad de trampas en la intercara (Dit) cercanos a 1011 eV-1cm-2. Este valor es inferior al que presentaron las estructuras sin oxidar, del tipo SiN1.55:H/Si. Además, los dispositivos apilados mostraron un barrido del nivel de Fermi mayor y una histéresis prácticamente despreciable.MIS structures have been fabricated on Si (111) by a two-step process: first an exposition of the Si substrates to an ECR oxygen plasma was performed, which yields a layer of SiOx (in the following PO-SiOx); this process was followed by an ECR plasma silicon nitride deposition (SiN1.55:H). The resulting MIS structure is Al/SiN1.55:H/PO-SiOx/Si. Devices have been characterized by the simultaneous measurement of the capacitance at high and low frequencies. This measurement lets us know the PO-SiOx/Si interface quality, calculate the thickness of the PO-SiOx layer and the growth rate of SiN1.55:H. To characterize the oxidation process some series of samples were prepared. In each series a process parameter was varied. These parameters were: the SiN1.55:H deposition time, the ECR plasma oxidation duration, the substrate temperature and the total oxygen flux. The bonding structure of the stacked dielectric has been studied by infrared spectroscopy. The stacked dielectrics spectra showed the super-position of two peaks: a less intense peak associated to the PO-SiOx layer with its maximum in 1056 cm(-1), and another one due to the SiN1.55:H film with its maximum in 860 cm(-1). These measurements showed that the PO-SiOx growth law is d(SiO) = 2.71 t(ox)(026) nm where d(SiO) is the PO-SiOx layer thickness and t(ox) is the oxidation time in min. Concerning electrical characteristics, stacked MIS devices showed interface trap density minimums (D-u) close to 10(11) eV(-1)cm(-2). This value is inferior to the one that non-oxydized devices (Al/SiN1.55:H/Si) show. Also, stacked devices presented higher Fermi level sweeps and an electrical hysteresis almost insignificant.Depto. de Estructura de la Materia, Física Térmica y ElectrónicaFac. de Ciencias FísicasTRUECICYT of Spainpu
Deposition of Intrinsic a-Si:H by ECR-CVD to Passivate the Crystalline Silicon Heterointerface in HIT Solar Cells
We have deposited intrinsic amorphous silicon (a-Si:H) using the electron cyclotron resonance (ECR) chemical vapor deposition technique in order to analyze the a-Si:H/c-Si heterointerface and assess the possible application in heterojunction with intrinsic thin layer (HIT) solar cells. Physical characterization of the deposited films shows that the hydrogen content is in the 15-30% range, depending on deposition temperature. The optical bandgap value is always comprised within the range 1.9- 2.2 eV. Minority carrier lifetime measurements performed on the heterostructures reach high values up to 1.3 ms, indicating a well-passivated a-Si:H/c-Si heterointerface for deposition temperatures as low as 100°C. In addition, we prove that the metal-oxide- semiconductor conductance method to obtain interface trap distribution can be applied to the a-Si:H/c-Si heterointerface, since the intrinsic a-Si:H layer behaves as an insulator at low or negative bias. Values for the minimum of D_it as low as 8 × 10^10 cm^2 · eV^-1 were obtained for our samples, pointing to good surface passivation properties of ECR-deposited a-Si:H for HIT solar cell applications
A robust method to determine the contact resistance using the van der Pauw set up
The van der Pauw method to calculate the sheet resistance and the mobility of a semiconductor is a pervasive technique both in the microelectronics industry and in the condensed matter science field. There are hundreds of papers dealing with the influence of the contact size, nonuniformities and other second order effects. In this paper we will develop a simple methodology to evaluate the error produced by finite size contacts, detect the presence of contact resistance, calculate it for each contact, and determine the linear or rectifying behavior of the contact. We will also calculate the errors produced by the use of voltmeters with finite input resistance in relation with the sample sheet resistance
- …