Application of airborne infrared technology to monitor building heat loss

The application of airborne infrared technology to the requirements for energy conservation in buildings was studied. Quantitative airborne data of the City of Ypsilanti, Michigan, were collected and processed to identify roof temperatures. A thermal scanner was flown at an altitude of 1,200 feet with two thermal bands 8.2-9.3 micrometers and 10.4-12.5 micrometers recorded by an analog system. Calibration was achieved by standard hot and cold plates. Using a thermal model to interpret ceiling insulation status, environmental factors were found to influence the relation between roof temperature and insulation. These include interior and sky temperatures, roofing materials, and the pitch and orientation of the roof. A follow-up mail survey established the ability to identify insulated and uninsulated houses from the airborne infrared data

NANOPOROUS ALUMINA ON MOLYBDENUM AND ITO SUBSTRATES FOR NANO-HETEROJUNCTION SOLAR CELL APPLICATIONS

Indium tin oxide (ITO) and molybdenum are substrates of choice in the manufacture of the CdS-CIS photovoltaic cell, which is the base for the leading thin-film solar cell technology. Substantial advancement in this technology is expected if these devices can be made in nanoporous alumina (AAO) templates. The first step to this endeavor is to learn to form AAO templates on molybdenum and ITO substrates. This was accomplished, and the results are reported in this thesis. Starting substrates were glass, coated with either a thin molybdenum layer or a thin ITO layer. Aluminum was deposited on top of this conducting substrate. Oxalic acid was used as the electrolyte for anodization. In the case of molybdenum substrates, average pore diameter was 45 nm when an anodization voltage of 40 volts was used for approximately 46 minutes; current density was approximately 23 amps/sq. m. In the case of ITO substrates, pores of 45 nm diameter were obtained for approximately 20 minute anodization at 40 V; current density was 40 amps/sq. m; annealing of aluminum layer prior to anodization, at 550 oC (degrees Centigrade) for 90 minutes was needed to obtain good pores. A one micrometer thick CdS layer was electrodeposited inside the AAO pores on top of the ITO substrate. In preliminary experiments, CdS/Cu2S photovoltaic heterojunctions with an open circuit voltage of 242 mV were formed inside the nanopores

Shrimp industry in and around Mandapam

Mandapam is an important place in view of living marine resources, particularly the. shrimp. The. Term 'Shrimp' includes prawns and lobsters, Shrimp industry has its full compliment of infrastructure facilities from building trawlers, to processing at Mandapam

An Empirical Model of Price and Quality Effects of e-Commerce

During the e-Commerce boom of the late 1990s it was predicted that the Internet would have a significant impact on prices of various goods and services. Whether the net impact would he p ositive or negative was harder to forecast, there being opposing effects. We develop a model that describes some of those effects, including information asymmetry, search costs, price dispersion, trust premiums, and convenience premiums. The model is discussed, and a major portion is statistically tested with empirical data. As an exploratory gesture, the model is extended to consider product quality effects of online shopping. The final section concludes with direction for future research

Three computer codes to read, plot and tabulate operational test-site recorded solar data

Computer programs used to process data that will be used in the evaluation of collector efficiency and solar system performance are described. The program, TAPFIL, reads data from an IBM 360 tape containing information (insolation, flowrates, temperatures, etc.) from 48 operational solar heating and cooling test sites. Two other programs, CHPLOT and WRTCNL, plot and tabulate the data from the direct access, unformatted TAPFIL file. The methodology of the programs, their inputs, and their outputs are described

Protecting workers through supply chains: lessons from two construction case studies

Two case studies of the successful use of supply chains to support the effective management of health and safety on constructions sites are analysed to identify the factors supporting this success. The analysis reveals that a combination of external regulatory pressures and an industry structure facilitative of the establishment and implementation of ‘good practice’ played a crucial role in the outcomes achieved. It is concluded therefore that while the findings lend weight to policy initiatives to utilise the power dynamics in supply chains to protect working conditions, they also suggest that surrounding institutional and industrial contexts exert a potentially crucial influence over their effectiveness. Consequently, it is further argued that such initiatives need to be responsively shaped to them

Regulating the employment dynamics of domestic supply chains

This paper sheds light on the role that the regulation of primarily domestic, rather than global, supply chains could play in protecting and enhancing standards of workplace health and safety, as well as employment standards more generally. The analysis presented confirms the potential relevance of such regulation in these regards. However, it also reinforces existing evidence pointing to the fact that only very rarely will market-related considerations on their own prompt purchasers to seek to directly influence the employment practices of their suppliers. The paper ends therefore by highlighting a number of key issues relating to the design of regulatory initiatives aimed at protecting and enhancing employment conditions within supply chains

Quasielastic Scattering of Thermal Neutrons by CH3OH and CH3SH

We report measurements of the line broadening of thermal neutrons quasielastically scattered from room temperature methyl alcohol and methyl mercaptan in the liquid phase. The linewidths for CH3SH are found to be approximately twice those of CH3OH. This is interpreted to be additional evidence of the relative freedom of molecular motions and lack of hydrogen bonding in CH3SH. The linewidth data are discussed in terms of the simple diffusion model, and for methanol, in terms of a globular diffusion model. For methanol a diffusion constant of 3.25 × 10−5 cm2sec−1 and a diffusing globule mass of ∼3.5 molecules are in agreement with the data. An upper limit of D  =  6.5 × 10−5cm2sec−1D=6.5×10−5cm2sec−1 is found for the diffusion constant of CH3SH.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70369/2/JCPSA6-51-12-5543-1.pd

Grazing Periods and Forage Production on the National Forests

Stockmen in the West have always had confidence in the adequacy of the native forage crop to provide pasturage for their livestock. Indeed, under normal climatic conditions this enormous natural resource has not failed the grazier, except where it has been called upon to meet unreasonable demands. The productivity of the range has declined sharply, however, wherever the requirements of plant growth have been disregarded for many years in succession. Where there has been too early or too frequent and to heavy grazing, undue trampling, or some other unsatisfactory feature of range use, the results have been uniformly bad. Many conspicuous examples show that abundant nutritious forage can not be expected in the absence of rational grazing and livestock management

Pain and delirium: mechanisms, assessment, and management

Purpose: Pain and delirium are common problems for older people. Both conditions are prevalent in acute hospital settings. In people living in the community, delirium often precipitates presentation to the emergency department. Pain and delirium are known to interact in a complex and multidirectional way. This can make it challenging for staff to recognize and treat pain in people with delirium. Methods: This paper aims to explore the complex relationship between pain and delirium and on pain assessment in delirium, drawing together evidence from a range of settings including acute medical, cardiac and orthopaedic post-operative cohorts, as well as from aged care. Results: A limited number of studies suggest there is an association between pain and delirium; however, this is a complex, particularly where analgesics which may-themselves cause delirium are prescribed. Factors acting on the pathway between pain and delirium may include depression, sleep deprivation and disturbance of the cholinergic system. Delirium affects the ability to self-report pain. The fluctuating nature of delirium as well as reduced awareness and attention may challenge practitioners in recognizing, assessing and treating pain. Evidence concerning the reliability and validity of current observational and self-assessment tools in people with delirium is unclear but some show promise in this population. Conclusion: The current evidence base regarding assessing pain in people with delirium is lacking. Tentative recommendations, drawing on current guidelines require robust testing. Guidelines for people with pain and dementia require adaptations regarding the unique characteristics of delirium. The complex interplay between dementia, pain and delirium warrants further investigation across a range of settings