Effect of mechanical surface and heat treatments on erosion resistance

The effects of mechanical surface treatments as well as heat treatments on the erosion resistance of 6061 aluminum alloy and 1045 steel were studied. Mechanical surface treatments were found to have little or no effect on the erosion resistance. This is due to the formation by particle impact of a work hardened surface layer regardless of the initial surface condition. The erosion resistance of Al single crystals is found to be independent of orientation. This is due to destruction of the surface microstructure and formation of a polycrystalline surface layer by the impact of erodant particles as observed by X-ray diffraction. While upon solution treatment of annealed 6061 aluminum the increase in hardness is accompanied by an increase in erosion resistance, precipitation treatment which causes a further increase in hardness results in slightly lower erosion resistance. Using two types of erodant particles, glass beads and crushed glass, the erosion rate is found to be strongly dependent on erodant particle shape, being an order of magnitude higher for erosion with crushed glass as compared to glass beads. While for erosion with glass beads heat treatment of 1045 steel had a profound effect on its erosion resistance, little or no such effect was observed for erosion with crushed glass

Effects of erodant particle shape and various heat treatments on erosion resistance of plain carbon steel

Erosion tests were conducted on 1045 steel samples which had been subjected to different heat treatments. The weight of material removed upon erosion with glass beads and crushed glass was measured. The data show that there is no correlation between hardness and erosion resistance. The erosion rate was strongly dependent on the shape of erodant particles, being an order of magnitude higher for erosion with crushed glass than with glass beads. Heat treatment had a profound effect on the erosion resistance when the erodant particles were glass beads but little or no effect when the particles were crushed glass. It is thus concluded that different mechanisms of material removal are involved with these two erodants. This conclusion is supported by the surface morphology of annealed 1045 steel samples which had been eroded by these two types of erodant particles. SEM micrographs of the eroded surfaces show that for erosion with glass beads it is deformation induced fracture of surface layers

Erosion of iron-chromium alloys by glass particles

The material loss upon erosion was measured for several iron-chromium alloys. Two types of erodent material were used: spherical glass beads and sharp particles of crushed glass. For erosion with glass beads the erosion resistance (defined as the reciprocal of material loss rate) was linearly dependent on hardness. This is in accordance with the erosion behavior of pure metals, but contrary to the erosion behavior of alloys of constant composition that were subjected to different heat treatments. For erosion with crushed glass, however, no correlation existed between hardness and erosion resistance. Instead, the erosion resistance depended on alloy composition rather than on hardness and increased with the chromium content of the alloy. The difference in erosion behavior for the two types of erodent particles suggested that two different material removal mechanisms were involved. This was confirmed by SEM micrographs of the eroded surfaces, which showed that for erosion with glass beads the mechanism of material removal was deformation-induced flaking of surface layers, or peening, whereas for erosion with crushed glass it was cutting or chopping

Refractory Hand Ulceration: A Case of Chronic Ulceration and Sporotrichoid Spread in a Fish Tank Hobbyist following Mycobacterium marinum Infection

We report the case of a 35-year-old man with a chronic ulceration of the hand in whom an infection with Mycobacterium marinum was diagnosed. Clarithromycin and doxycycline were prescribed, resulting in a slow resolution of the ulceration. M. marinum is a nontuberculous mycobacterium that causes skin lesions such as nodules, ulcerations, and sporotrichoid spread, but may also be responsible for osteoarticular lesions. In this case report, we discuss the clinical characteristics of this condition, as well as its diagnostic methods and treatments

Development of Viral Vectors for Use in Cardiovascular Gene Therapy

Cardiovascular disease represents the most common cause of mortality in the developed world but, despite two decades of promising pre-clinical research and numerous clinical trials, cardiovascular gene transfer has so far failed to demonstrate convincing benefits in the clinical setting. In this review we discuss the various targets which may be suitable for cardiovascular gene therapy and the viral vectors which have to date shown the most potential for clinical use. We conclude with a summary of the current state of clinical cardiovascular gene therapy and the key trials which are ongoing

Prevalence, characteristics, and impacts of work-related musculoskeletal disorders: a survey among physical therapists in the State of Kuwait

<p>Abstract</p> <p>Background</p> <p>Physical therapists working in the State of Kuwait are at risk of work-related musculoskeletal disorders (WMSDs). However, prevalence rates and risk factors are not well documented. The objective of this study was to determine the prevalence, characteristics, and impacts of WMSDs among physical therapists in the State of Kuwait.</p> <p>Methods</p> <p>A self-administered questionnaire was distributed to 350 physical therapists. The questionnaire gathered demographic data as well as information on occurrence of musculoskeletal complaints in the previous 12 months. Descriptive statistics, frequency, and Chi-square analyses were used.</p> <p>Results</p> <p>The response rate to the questionnaire was 63% (222/350). Of the 212 responders included in the study, the one-year prevalence of WMSDs was 47.6%, with lower back complaints as the most common (32%). This was followed by neck (21%), upper back (19%), shoulder (13%), hand/wrist (11%), knee (11%), ankle/foot (6%), elbow (4%), and hip/thigh (3%) complaints. The frequency of WMSDs was not gender related (except lower back, neck, and shoulder complaints) nor was it related to age (except lower back complaints), working venues (except hand/wrist), working hours, area of specialty, or exercise. WMSDs' impact on work was minor.</p> <p>Conclusions</p> <p>WMSDs among physical therapists in Kuwait were common, with lower back and neck affected most. Lower back and neck WMSDs were related to the participant's demographics. Hand/wrist WMSDs were related to work settings. Further research is needed to investigate the effect of risk factors as physical load, psychosocial load, and general health status on prevalence musculoskeletal disorders.</p

Work-related musculoskeletal disorders : A survey of physical therapists in Izmir-Turkey

BACKGROUND: This study was planned to collect data about causes, prevalence and responses to work-related musculoskeletal disorders reported by physiotherapists employed in Izmir, Turkey. METHOD: A two-page survey with closed ended questions was used as the data collected method. This survey was distributed to 205 physiotherapists working in Izmir, Turkey, and 120 physiotherapists answered. Questions included occupational history of physiotherapists and musculoskeletal symptoms, special areas, tasks, job-related risk factors, injury prevention strategies, and responses to injury. RESULTS: Eighty-five percent of the physiotherapists have had a musculoskeletal injury once or more in their lifetime. Injuries have been occurred mostly in low back (26 %), hand-wrist (18 %), shoulders (14 %) and neck (12 %). The highest risk factor in causing the injury was transferring the patient at 15%. Sixty-nine percent of physiotherapists visited a physician for their injury and sixty-seven percent of the respondents indicated that they had not limited their patient contact time as a result to their injury CONCLUSIONS: According to the results of this study, the rate of musculoskeletal disorders in physiotherapists in Izmir-Turkey has been found to be high due to their profession. Respondents felt that a change in work habits was required in order to decrease the risk of another injury

Work-related musculoskeletal disorders among Nigerian Physiotherapists

<p>Abstract</p> <p>Background</p> <p>Physiotherapists are known to be prone to Work- related musculoskeletal disorders (WRMDs) but its prevalence among physiotherapists in Nigeria has not been reported. This study investigated the prevalence and work factors of WRMDs among physiotherapists in Nigeria.</p> <p>Methods</p> <p>A cross- sectional survey was administered to physiotherapists in different parts of Nigeria using a 2- part questionnaire with items adopted from questionnaires used for similar studies around the world. Two hundred and seventeen copies of the questionnaire were distributed for self administration but 126 physiotherapists returned completed surveys for a 58.1% response. The data were analyzed using SPPS version 10 at alpha level of 0.05. Descriptive statistics of frequency and percentages and inferential statistics of <it>x</it>²were used as appropriate for data analysis.</p> <p>Results</p> <p>Reported 12- month prevalence of WRMDs among Nigerian physiotherapists was 91.3%. Prevalence of WRMDs was significantly higher in female physiotherapists (p = 0.007) and those with lower body mass index (p = 0.045). The low back (69.8%) was the most commonly affected body part, followed by the neck (34.1%). Fifty percent of the physiotherapists first experienced their WRMDs within five years of graduation and the highest prevalence (61.7%) was found among physiotherapists younger than 30 years. Treating large number of patients in a day was cited by most (83.5%) of the respondents as the most important work factor for their WRMDs. The most commonly adopted coping strategy identified was for the therapists to modify their position and/or the patient's position (64.3%). Majority of the respondents (87.0%) did not leave the profession but 62.6% changed and/or modified their treatment because of their WRMDs.</p> <p>Conclusion</p> <p>The prevalence of WRMDs among physiotherapists in Nigeria is higher than most values reported for their counterparts around the world. The coping strategies and work factors of WRMDs among Nigerian physiotherapists are mostly similar to those of their counterparts elsewhere.</p

The Menopause Taboo at Work: Examining Women’s Embodied Experiences of Menopause in the UK Police Service

This article contributes to the growing body of knowledge about gendered ageing at work through an examination of the embodied experiences of women undergoing menopause transition in the UK police service. Drawing on 1197 survey responses, providing both quantitative and qualitative data gathered across three police forces in 2017–18, the findings highlight the importance of a material-discursive approach that considers contextual influences on women’s bodily experiences. The article evidences gendered ageism and the penalty suffered by women whose ageing bodies fail to comply with an ideal worker norm. It makes an important contribution both to theorising embodiment, drawing in age as well as gender discourses, and to promoting a material-discursive approach that recognises the materiality of the body while also offering the potential for agency, reflection and resistance

The use of simulation to prepare and improve responses to infectious disease outbreaks like COVID-19: practical tips and resources from Norway, Denmark, and the UK.

In this paper, we describe the potential of simulation to improve hospital responses to the COVID-19 crisis. We provide tools which can be used to analyse the current needs of the situation, explain how simulation can help to improve responses to the crisis, what the key issues are with integrating simulation into organisations, and what to focus on when conducting simulations. We provide an overview of helpful resources and a collection of scenarios and support for centre-based and in situ simulations