7,317 research outputs found

    Viabilidad y factibilidad para la creación de una granja productora de ovinos en la Guajira

    Get PDF
    Se muestra el proceso para determinar la viabilidad y factibilidad en la creación de una granja dedicada a la producción de ovinos por medio de un cruzamiento con hembras criollas de la región y machos puros de la raza Katahdin, en un programa de cría, levante y ceba, en el municipio de Maicao en el departamento de la Guajira (Colombia) mediante sistemas de producción semi-intensivo en pastoreo de gramíneas (Andropogon gayanus), forraje de corte de Sorgo forrajero (Sorghum bicolor), Maralfalfa (Pennisetum spp) y leguminosa como la Moringa (moringa oleífera). Para lograr este objetivo, se realizaron procesos correspondientes al análisis técnico, de mercado, legal, ambiental y financiero; lo cual arrojó como resultado principalmente una baja oferta en el mercado local, por lo que se considera una oportunidad de negocio, con una inversión de $107.000.000

    Study of Structural, Thermic, μ-Raman and Optic Transformation of PVA/TiO2 Polymeric Membranes

    Get PDF
    Composites (1-x)PVA/xTiO2 (0,025≤x≤0,250) were prepared from aqueous solution. The influence of TiO2 ceramic fillers on polymer matrix was characterized by: X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), micro-Raman scattering, UV-visible absorption (UV-vis) and scanning electronic microscopy (SEM). Raman and XRD results showed the amorphous and monoclinic phases for PVA and anatase phase for TiO2. SEM micrographs showed spread TiO2 fillers in PVA polymeric matrix forming aggregates. DSC and TGA thermograms show phase transitions with temperature, glass transition temperature (Tg) and thermal stability of polymeric matrix. The band gap energy (Eg) related to TiO2 (anatase) has been calculated from UV-visible measures, showing a strong absorption at near-UV region due to ceramic fillers.Se sinterizaron membranas compuestas (1–x)PVA/xTiO2 (0,025≤x≤0,250) por mezclas en disolución acuosa.La influencia de los rellenos cerámicos de TiO2 sobre la matriz polimérica de PVA se estudió por espectroscopía μ–Raman, difracción de rayos–X (XRD), calorimetría diferencial de barrido (DSC), análisis termo–gravimétrico (TGA), absorción UV–visible y microscopía de barrido electrónico (SEM). Resultados Raman y XRD mostraron las fases amorfa y monoclínica para el PVA y la fase anatasa para el TiO2. Micrografías SEM mostraron los rellenos de TiO2 dispersos en la matriz polimérica de PVA formando agregados. Resultados DSC y TGA mostraron transiciones de fase con la temperatura, la temperatura detransición vítrea (Tg) y la estabilidad térmica de la matriz polimérica. La energía de band gap óptico (Eg) relacionada con el TiO2 (anatasa) se calculó de medidas UV–visible, mostrándose una fuerte absorción en la región UV–cercana debido a los rellenos cerámicos

    Study of Structural, Thermic, μ-Raman and Optic Transformation of PVA/TiO2 Polymeric Membranes

    Get PDF
    Composites (1-x)PVA/xTiO2 (0,025≤x≤0,250) were prepared from aqueous solution. The influence of TiO2 ceramic fillers on polymer matrix was characterized by: X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), micro-Raman scattering, UV-visible absorption (UV-vis) and scanning electronic microscopy (SEM). Raman and XRD results showed the amorphous and monoclinic phases for PVA and anatase phase for TiO2. SEM micrographs showed spread TiO2 fillers in PVA polymeric matrix forming aggregates. DSC and TGA thermograms show phase transitions with temperature, glass transition temperature (Tg) and thermal stability of polymeric matrix. The band gap energy (Eg) related to TiO2 (anatase) has been calculated from UV-visible measures, showing a strong absorption at near-UV region due to ceramic fillers.Se sinterizaron membranas compuestas (1–x)PVA/xTiO2 (0,025≤x≤0,250) por mezclas en disolución acuosa.La influencia de los rellenos cerámicos de TiO2 sobre la matriz polimérica de PVA se estudió por espectroscopía μ–Raman, difracción de rayos–X (XRD), calorimetría diferencial de barrido (DSC), análisis termo–gravimétrico (TGA), absorción UV–visible y microscopía de barrido electrónico (SEM). Resultados Raman y XRD mostraron las fases amorfa y monoclínica para el PVA y la fase anatasa para el TiO2. Micrografías SEM mostraron los rellenos de TiO2 dispersos en la matriz polimérica de PVA formando agregados. Resultados DSC y TGA mostraron transiciones de fase con la temperatura, la temperatura detransición vítrea (Tg) y la estabilidad térmica de la matriz polimérica. La energía de band gap óptico (Eg) relacionada con el TiO2 (anatasa) se calculó de medidas UV–visible, mostrándose una fuerte absorción en la región UV–cercana debido a los rellenos cerámicos

    Cost-Effective Monitoring of Railroad Bridge Performance

    Get PDF
    The railroad network carries 40 % of the freight in the US. Railroad bridges are the most critical part of the network and they need to be properly maintained for safety of operations. Railroad managers need to inspect the bridges in order to assess their structural condition. Railroad managers are interested in measuring displacements under train crossing events to prioritize their bridge management and safety decisions. However, bridge displacements are difficult to collect in the field, because they require a fixed reference from where to measure. Accelerations can be used to estimate dynamic displacements but to this date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate the total displacements of a railroad bridge under live train loads using acceleration and tilt data without a need for fixed reference. Researchers used real bridge displacement data representing different bridge serviceability level under train traffic. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic. This experiment configuration includes the use of a shake table to input the recorded signal from the field into a railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. The different acceleration readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. The results show that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference. In addition, this paper studies the use of a low-cost data acquisition platform to measure reference-free dynamic displacements of railroad bridges by combining low-cost microcontrollers and accelerometers. Researchers used the new system to measure accelerations and reconstruct reference-free displacements from several railroad bridge crossing events. The results obtained from the proposed low-cost sensors were compared with those of commercial sensing equipment. The results show that low-cost sensors and commercial sensing systems can measure reference-free displacements with comparable accuracy. The results of this study show that the proposed platform estimates reference-free displacements with a peak error between 20 % and 30 % and a root mean square (RMS) error between 10 % and 20 %, which is similar to commercial SHM systems. The proposed low-cost system is approximately 300 times less expensive than the commercial sensing equipment. In conclusion, this study evaluates the accuracy of cost-effective systems to measure the reference-free displacement of railroad bridges. The conclusions of this study propose a cost-effective method to measure the reference-free displacement of railroad bridges that all railroad companies can afford. The ultimate goal of this research is to provide stakeholders with means to design, develop, own, and operate their own SHM systems

    El efecto mediático en la articulación del tejido social. El caso de Maracaibo, Venezuela

    Get PDF
    La investigación se planteó el problema de la influencia que ejercen los medios masivos de comunicación en la cohesión social de la sociedad marabina, en Venezuela. Con ese propósito aplicamos un cuestionario a una muestra estratificada que se estructuró a partir de una combinación de criterios socioeconómicos y socioculturales. El estudio consideró indicadores referidos al consumo mediático, a la influencia televisiva, a la presencia de Internet, a las motivaciones para ver TV, a los programas televisivos preferidos, a la cobertura de la telenovela y a los modos y lugares donde se interactúa con la TV. Los resultados de la investigación evidencian, primero, un consumo simbólico comunicacional considerable, que influye en el tejido social que se constituye. En segundo lugar, el comportamiento del usuario frente a los medios masivos, particularmente el elevado consumo televisivo, facilita el cometido mediático. En tercer lugar, la expansión de la oferta y del impacto televisivo no se traduce en un crecimiento, al menos suficiente, de su diversidad y sobre todo de su pluralismo.This study approaches the influence made by the massive media in the social cohesion of the society in Maracaibo, Venezuela. In these terms, we applied a questionnaire to a stratified sample which, was built up out of socio-economic and socio-cultural criteria. This investigation considered indicators referred to the media consuming habits, television influence, internet, the motivation to watch T.V., favorite television programs, the scope of soap operas as well as the places where people interact with television. The results show, first, a quite considerable symbolic communicational consuming habit, which influences the social web. Second, the conduct of the audience before the massive media, the increased television consuming in particular, makes easier the purpose of the media. Third, the expansion of the offering standards as well as the television impact does not implicate a sufficient growth of its diversity and pluralism

    Agresividad cotidiana y aprobación de la violencia extrema

    Get PDF
    La violencia es uno de los principales problemas sociales de Venezuela; existe evidencia empírica de que la impunidad y el aumento de la posesión de armas son elementos que contribuyen a incrementar el número de homicidios. Aun sin guerra en el país, la violencia interpersonal de la cotidianidad afecta a todos; es expresión de normas y pautas culturales que sirven de soporte a comportamientos agresivos. Es un contexto en el cual la sensación de indefensión sirve de justificación a conductas de aprobación de acciones extrajudiciales de la policía y a estar dispuesto a matar a los delincuentes. Al respecto, se realizó una investigación que tenía como objetivo central analizar la problemática de la violencia urbana en Venezuela a través de la exploración de diversas áreas, una de la cuales es la relativa a las normas y la cultura, cuyos resultados se describen en este artículo. Para la contextualización teórica preliminar se tomaron elementos de algunas perspectivas como la culturalista de Montangu (1970), la cognitiva social de Bandura (1973), la del comportamiento aprendido de Eron (1987) y la simbólica de Charon (1985) y Mead (1934). Los principales resultados apuntan a la existencia de un clima de agresividad en el espacio doméstico que se refleja en el plano comunitario y social; con lo cual se estaría reproduciendo el patrón cultural de aprobación de la violencia

    Cristo Resucitado de Torremolinos: discusión entre Arte Religioso y Arte Sacro actual

    Get PDF
    La siguiente publicación parte de la iniciativa del proyecto escultórico desarrollado en el seno de la Facultad de Bellas Artes de Sevilla. El mismo se ha elaborado una obra escultórica adaptada a los criterios formativos de la asignatura de Imaginería polícroma. En la que se ha profundizado desde la experiencia profesional en la investigación de técnicas tradicionales de la policromía adaptada a la escultura postconciliar en relación al arte sacro actual.This article is the result of the work experience at the Faculty of Fine Arts in Seville. It shows the development of a sculpture work adapted to the subject of Imaginería Polícroma and it´s criterions of training. In this subject we study consciously from the professional experience of traditional techniques, used in sculptures after the II Vatican Concilium and above all in the current religious sculptures

    Stochastic model for the dynamics of interacting Brownian particles

    Full text link
    Using the scheme of mesoscopic nonequilibrium thermodynamics, we construct the one- and two- particle Fokker-Planck equations for a system of interacting Brownian particles. By means of these equations we derive the corresponding balance equations. We obtain expressions for the heat flux and the pressure tensor which enable one to describe the kinetic and potential energy interchange of the particles with the heat bath. Through the momentum balance we analyze in particular the diffusion regime to obtain the collective diffusion coefficient in terms of the hydrodynamic and the effective forces acting on the Brownian particles.Comment: latex fil
    corecore