A beam-beam monitoring detector for the MPD experiment at NICA

The Multi-Purpose Detector (MPD) is to be installed at the Nuclotron Ion Collider fAcility (NICA) of the Joint Institute for Nuclear Research (JINR). Its main goal is to study the phase diagram of the strongly interacting matter produced in heavy-ion collisions. These studies, while providing insight into the physics of heavy-ion collisions, are relevant for improving our understanding of the evolution of the early Universe and the formation of neutron stars. In order to extend the MPD trigger capabilities, we propose to include a high granularity beam-beam monitoring detector (BE-BE) to provide a level-0 trigger signal with an expected time resolution of 30 ps. This new detector will improve the determination of the reaction plane by the MPD experiment, a key measurement for flow studies that provides physics insight into the early stages of the reaction. In this work, we use simulated Au+Au collisions at NICA energies to show the potential of such a detector to determine the event plane resolution, providing further redundancy to the detectors originally considered for this purpose namely, the Fast Forward Detector (FFD) and the Hadron Calorimeter (HCAL). We also show our results for the time resolution studies of two prototype cells carried out at the T10 beam line at the CERN PS complex.Comment: 16 pages, 12 figures. Updated to published version with added comments and correction

5to. Congreso Internacional de Ciencia, Tecnología e Innovación para la Sociedad. Memoria académica

El V Congreso Internacional de Ciencia, Tecnología e Innovación para la Sociedad, CITIS 2019, realizado del 6 al 8 de febrero de 2019 y organizado por la Universidad Politécnica Salesiana, ofreció a la comunidad académica nacional e internacional una plataforma de comunicación unificada, dirigida a cubrir los problemas teóricos y prácticos de mayor impacto en la sociedad moderna desde la ingeniería. En esta edición, dedicada a los 25 años de vida de la UPS, los ejes temáticos estuvieron relacionados con la aplicación de la ciencia, el desarrollo tecnológico y la innovación en cinco pilares fundamentales de nuestra sociedad: la industria, la movilidad, la sostenibilidad ambiental, la información y las telecomunicaciones. El comité científico estuvo conformado formado por 48 investigadores procedentes de diez países: España, Reino Unido, Italia, Bélgica, México, Venezuela, Colombia, Brasil, Estados Unidos y Ecuador. Fueron recibidas un centenar de contribuciones, de las cuales 39 fueron aprobadas en forma de ponencias y 15 en formato poster. Estas contribuciones fueron presentadas de forma oral ante toda la comunidad académica que se dio cita en el Congreso, quienes desde el aula magna, el auditorio y la sala de usos múltiples de la Universidad Politécnica Salesiana, cumplieron respetuosamente la responsabilidad de representar a toda la sociedad en la revisión, aceptación y validación del conocimiento nuevo que fue presentado en cada exposición por los investigadores. Paralelo a las sesiones técnicas, el Congreso contó con espacios de presentación de posters científicos y cinco workshops en temáticas de vanguardia que cautivaron la atención de nuestros docentes y estudiantes. También en el marco del evento se impartieron un total de ocho conferencias magistrales en temas tan actuales como la gestión del conocimiento en la universidad-ecosistema, los retos y oportunidades de la industria 4.0, los avances de la investigación básica y aplicada en mecatrónica para el estudio de robots de nueva generación, la optimización en ingeniería con técnicas multi-objetivo, el desarrollo de las redes avanzadas en Latinoamérica y los mundos, la contaminación del aire debido al tránsito vehicular, el radón y los riesgos que representa este gas radiactivo para la salud humana, entre otros

Actualidad y prospectiva de la investigación científica en el Centro Universitario Amecameca de la Universidad Autónoma del Estado de México

Con responsabilidad, se organizó un programa cuya finalidad fuera publicitar con transparencia dichos avances, a través de un esfuerzo de rendición de cuentas a la comunidad inmediata, la universitaria, y a la comunidad abierta, la sociedad que la principal referencia para tal efecto. El programa se concretiza a través del presente libro, conformado con una inspiración de investigación multidisciplinaria; sin embargo, para llegar a tal fin, el reto es realizar el proceso de búsqueda y generación de conocimiento transitando hacia la colaboración de los cuerpos académicos, que puedan construir nuevos conocimientos fortalecidos por la convergencia de diferentes campos del saber. En consecuencia, la primera etapa de esta estrategia es la publicidad de los trabajos investigativos ejercidos, para hacer un balance al día, pero también proyectar el futuro de cada campo y área del conocimiento. La organización explicativa está organizada por tres bloques representativos del quehacer en la generación de conocimiento del Centro Universitario, un primer bloque centra el interés en las humanidades, educación y sustentabilidad; el segundo bloque lo integra la reflexión científica sobre la construcción democrática, derechos humanos y equidad de género; en el tercer segmento se destina a la seguridad alimentaria, salud pública y sistemas agropecuarios. La actualidad de la investigación eleva la producción lograda y lo que en el momento se encuentra en construcción y los alcances que produce para la docencia, la investigación misma, y para la sociedad en general. La prospectiva es un área que todos los capítulos desarrollan con el propósito de delinear los alcances innovadores por andar en teoría, metodología e incluso en los saberes mismo

EDUCACIÓN AMBIENTAL Y SOCIEDAD. SABERES LOCALES PARA EL DESARROLLO Y LA SUSTENTABILIDAD

Este texto contribuye al análisis científico de varias áreas del conocimiento como la filosofía social, la patología, la educación para el cuidado del medio ambiente y la sustentabilidad que inciden en diversas unidades de aprendizaje de la Licenciatura en Educación para la Salud y de la Maestría en Sociología de la SaludLas comunidades indígenas de la sierra norte de Oaxaca México, habitan un territorio extenso de biodiversidad. Sin que sea una área protegida y sustentable, la propia naturaleza de la región ofrece a sus visitantes la riqueza de la vegetación caracterizada por sus especies endémicas que componen un paisaje de suma belleza

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

A Current Monitor System in High-Voltage Applications in a Range from Picoamps to Microamps

In this article, we present a system to measure current in the range of 0 to 10 μA with high-voltage isolation up to 5 kV. This current monitor consists of three ammeters connected in series, to improve the resolution in the measurement. The design features several innovative elements such as using low voltage to provide power to the devices to measure the current and digitize it with a sampling frequency of 1 KHz, it is generated based on a DC-DC converter that produces three voltages, +12 V, −12 V, and 5 V, from a conventional 10 V source. The three voltages are referenced to the same floating ground. The DC-DC converter has a high voltage insulation up to 5 kV and four optocouplers with an insulation up to 20 kV are used to read the digitized data. The introduction of a DC-DC converter contributed to reduce the noise level in the analog part of the circuit which has been resolved implementing shields inside the board. In particle physics, several systems are used to detect particles in high-energy physics experiments such as Gas Electron Multiplier (GEM), micromegas, etc. GEMs suffer small deteriorations due to discharges in constant operation and require monitoring the current consumption at high frequency (1 kHz). In this work, we present the design and operation of a 0 to 10 μA auto scale ammeter. The results obtained by monitoring the current in a 10 × 10 cm2 GEM are shown

A Current Monitor System in High-Voltage Applications in a Range from Picoamps to Microamps

In this article, we present a system to measure current in the range of 0 to 10 &mu;A with high-voltage isolation up to 5 kV. This current monitor consists of three ammeters connected in series, to improve the resolution in the measurement. The design features several innovative elements such as using low voltage to provide power to the devices to measure the current and digitize it with a sampling frequency of 1 KHz, it is generated based on a DC-DC converter that produces three voltages, +12 V, &minus;12 V, and 5 V, from a conventional 10 V source. The three voltages are referenced to the same floating ground. The DC-DC converter has a high voltage insulation up to 5 kV and four optocouplers with an insulation up to 20 kV are used to read the digitized data. The introduction of a DC-DC converter contributed to reduce the noise level in the analog part of the circuit which has been resolved implementing shields inside the board. In particle physics, several systems are used to detect particles in high-energy physics experiments such as Gas Electron Multiplier (GEM), micromegas, etc. GEMs suffer small deteriorations due to discharges in constant operation and require monitoring the current consumption at high frequency (1 kHz). In this work, we present the design and operation of a 0 to 10 &mu;A auto scale ammeter. The results obtained by monitoring the current in a 10 &times; 10 cm2 GEM are shown