136 research outputs found
Latency-aware End-to-end Multi-path Data Transmission for URLLC Services
5th Generation Mobile Communication Technology (5G) utilizes the Access
Traffic Steering, Switching, and Splitting (ATSSS) rule to enable multi-path
data transmission, which is currently being standardized. Recently, the 3rd
Generation Partnership Project (3GPP) SA1 and SA2 have been working on the
multi-path solution for possible improvement from different perspectives.
However, the existing 3GPP multi-path solution has some limitations on
ultra-reliable low-latency communication (URLLC) traffic in terms of
reliability and latency requirements. In order to capture the potential gains
of multi-path architecture in the context of URLLC services, this paper
proposes a novel traffic splitting technique that can more efficiently enjoy
the benefit of multi-path architecture in reducing user equipment (UE) uplink
(UL) end-to-end (E2E) latency. In particular, we formulate an optimization
framework that minimizes user's UL E2E latency via the joint optimization on
the ratio of traffic assigned to each path and their corresponding transmit
power. The performance of the proposed scheme is evaluated via well-designed
simulations.Comment: This work has been submitted to the IEEE for possible publication. 5
pages, 6 figure
A new approach in petrophysical rock typing
Petrophysical rock typing in reservoir characterization is an important input for successful drilling, production, injection, reservoir studies and simulation. In this study petrophysical rock typing is divided into two major categories: 1) a petrophysical static rock type (PSRT): a collection of rocks having the same primary drainage capillary pressure curves or unique water saturation for a given height above the free water level, 2) a petrophysical dynamic rock type (PDRT): a set of rocks with a similar fluid flow behavior. It was shown that static and dynamic rock types do not necessarily overlap or share petrophysical properties, regardless of wettability. In addition, a new index is developed to define PDRTs via the Kozeny-Carman equation and Darcy's law. We also proposed a different index for delineation of PSRTs by combining the Young–Laplace capillary pressure expression and the Kozeny-Carman equation. These new indices were compared with the existing theoretical and empirical indices. Results showed that our indices are representatives of previously developed models which were also tested with mercury injection capillary pressure, water-oil primary drainage capillary pressure, and water-oil relative permeability data on core plugs from a highly heterogeneous carbonate reservoir in an Iranian oil field. This study enabled us to modify the conventional J-function to enhance its capability of normalizing capillary pr essure data universally
Whole Slide Imaging Versus Microscopy for Primary Diagnosis in Surgical Pathology: A Multicenter Blinded Randomized Noninferiority Study of 1992 Cases (Pivotal Study)
Most prior studies of primary diagnosis in surgical pathology using whole slide imaging (WSI) versus microscopy have focused on specific organ systems or included relatively few cases. The objective of this study was to demonstrate that WSI is noninferior to microscopy for primary diagnosis in surgical pathology. A blinded randomized noninferiority study was conducted across the entire range of surgical pathology cases (biopsies and resections, including hematoxylin and eosin, immunohistochemistry, and special stains) from 4 institutions using the original sign-out diagnosis (baseline diagnosis) as the reference standard. Cases were scanned, converted to WSI and randomized. Sixteen pathologists interpreted cases by microscopy or WSI, followed by a wash-out period of ≥4 weeks, after which cases were read by the same observers using the other modality. Major discordances were identified by an adjudication panel, and the differences between major discordance rates for both microscopy (against the reference standard) and WSI (against the reference standard) were calculated. A total of 1992 cases were included, resulting in 15,925 reads. The major discordance rate with the reference standard diagnosis was 4.9% for WSI and 4.6% for microscopy. The difference between major discordance rates for microscopy and WSI was 0.4% (95% confidence interval, -0.30% to 1.01%). The difference in major discordance rates for WSI and microscopy was highest in endocrine pathology (1.8%), neoplastic kidney pathology (1.5%), urinary bladder pathology (1.3%), and gynecologic pathology (1.2%). Detailed analysis of these cases revealed no instances where interpretation by WSI was consistently inaccurate compared with microscopy for multiple observers. We conclude that WSI is noninferior to microscopy for primary diagnosis in surgical pathology, including biopsies and resections stained with hematoxylin and eosin, immunohistochemistry and special stains. This conclusion is valid across a wide variety of organ systems and specimen types
Mechanistic study to investigate the effects of different gas injection scenarios on the rate of asphaltene deposition: An experimental approach
Asphaltene deposition during enhanced oil recovery (EOR) processes is one of the most problematic challenges in the petroleum industry, potentially resulting in flow blockage. Our understanding of the deposition mechanism with emphasis on the rate of the asphaltene deposition is still in its infancy and must be developed through a range of experiments and modelling studies. This study aims to investigate the rate of asphaltene deposition through a visual study under different gas injection scenarios. To visualise the asphaltene deposition, a high-pressure setup was designed and constructed, which enables us to record high-quality images of the deposition process over time. Present research compares the effects of nitrogen (N2), carbon dioxide (CO2) and methane (CH4) on the rate of asphaltene deposition at different pressures. The experimental results in the absence of gas injection revealed that the rate of asphaltene deposition increases at higher pressures. The results showed that the rate of asphaltene deposition in the case of CO2 injection is 1.2 times faster than CH4 injection at 100 bar pressure. However, N2 injection has less effect on the deposition rate. Finally, it has been concluded that the injection of CO2 leads to more asphaltene deposition in comparison with CH4 and N2. Moreover, the experimental results confirmed that gas injection affects the mechanism of asphaltene flocculation and leads to the formation of bigger flocculated asphaltene particles. The findings of this study can help for a better understanding of the mechanism of the asphaltene deposition during different gas-EOR processes
A Brave New World: Using the Outer Space Treaty to Design International Data Protection Standards for Low- Earth Orbit Satellite Operators
Analytical Estimation of Water-Oil Relative Permeabilities through Fractures
International audienceModeling multiphase flow through fractures is a key issue for understanding flow mechanism and performance prediction of fractured petroleum reservoirs, geothermal reservoirs, underground aquifers and carbon-dioxide sequestration. One of the most challenging subjects in modeling of fractured petroleum reservoirs is quantifying fluids competition for flow in fracture network (relative permeability curves). Unfortunately, there is no standard technique for experimental measurement of relative permeabilities through fractures and the existing methods are very expensive, time consuming and erroneous. Although, several formulations were presented to calculate fracture relative permeability curves in the form of linear and power functions of flowing fluids saturation, it is still unclear what form of relative permeability curves must be used for proper modeling of flow through fractures and consequently accurate reservoir simulation. Basically, the classic linear relative permeability (X-type) curves are used in almost all of reservoir simulators. In this work, basic fluid flow equations are combined to develop a new simple analytical model for water-oil two phase flow in a single fracture. The model gives rise to simple analytic formulations for fracture relative permeabilities. The model explicitly proves that water-oil relative permeabilities in fracture network are functions of fluids saturation, viscosity ratio, fluids density, inclination of fracture plane from horizon, pressure gradient along fracture and rock matrix wettability, however they were considered to be only functions of saturations in the classic X-type and power (Corey [35] and Honarpour et al. [28, 29]) models. Eventually, validity of the proposed formulations is checked against literature experimental data. The proposed fracture relative permeability functions have several advantages over the existing ones. Firstly, they are explicit functions of the parameters which are known for each of simulation computational cells or easy to measure in laboratory. It is also the first model that takes gravity effects and wettability of fracture walls into consideration and individually developed for water and oil-wet systems. Furthermore, the newly developed formulations are simple, efficient and accurate. Thus, they are recommended for implementation in dual and multiple continuum commercial reservoir simulators
- …