Application of an innovative model for the risk management of covid-19 in a multinational manufacturing company

The COVID-19 incidence in 61 manufacturing plants in Europe (EU), North America (NA) and Latin-America (LATAM) was compared with the incidence observed in the countries where the plants are located in order to evaluate the application of an innovative model for COVID-19 risk management. Firstly, a network of local and global teams was created, including an external university occupational physician team for scientific support. In July 2020, global prevention guidelines for the homogenous management of the pandemic were applied, replacing different site or regional procedures. A tool for COVID-19 monitoring was implemented to investigate the relationship between the incidence rates inside and outside the plants. In the period of May–November 2020, 565 confirmed cases (EU 330, NA 141, LATAM 94) were observed among 20,646 workers with different jobs and tasks, and in the last two months 85% EU and 70% NA cases were recorded. Only in 10% of cases was a possible internal origin of the contagion not excluded. In the EU and NA, unlike LATAM, the COVID-19 incidence rates inside the sites punctually followed the rising trend outside. In conclusion, the model, combining a global approach with the local application of the measures, maintains the sustainability in the manufacturing industry

Clinical and radiological criteria for the differential diagnosis between asbestosis and idiopathic pulmonary fibrosis: Application in two cases

Introduction: Idiopathic pulmonary fibrosis (IPF) and asbestosis are pulmonary interstitial diseases that may present overlapping clinical aspects in the full-blown phase of the disease. For both clinical entities the gold standard for diagnosis is histological examination, but its execution poses ethical problems, especially when performed for preventive or forensic purposes. Objective: To evaluate the application of internationally accepted clinical, anamnestic and radiological criteria for differential diagnosis between asbestosis and IPF, and to assess the ability to discriminate between the two diseases. Even if clinically similar, the two diseases present extremely different prognostic and therapeutic perspectives. Methods: Two clinical cases of IPF are reported, in which the differential diagnosis was made by studying occupational exposure to asbestos, the onset and progression of clinical symptoms, and the identification of specific radiological elements by means of chest High Resolution Computed Tomography (HRCT). Results: The diagnosis of IPF could be made on the basis of the absence of significant exposure to asbestos, the early onset and rapid progression of dyspnea and restrictive ventilatory defects, in association with a pulmonary radiological pattern characterized by peculiar elements such as honeycombing. Discussion: The diagnostic procedure adopted to make a differential diagnosis with asbestosis provides practical clinical elements facilitating the differentiation between the two forms of pulmonary fibrosis, a fundamental aspect of the activity of the occupational physician

Impact of COVID-19 emergency on the psychological well-being of susceptible individuals

The current pandemic has exerted an unprecedented psychological impact on the world population, and its effects on mental health are a growing concern. The present study aims to evaluate psychological well-being (PWB) during the COVID-19 crisis in university workers with one or more diseases likely to increase the risk of severe outcomes in the event of SARS-CoV-2 infection, defined as susceptible. 210 susceptible employees of an Italian University (aged 25-71 years) were recruited during the COVID-19 second wave (October-December 2020). A group comprising 90 healthy university employees (aged 26-69 years) was also recruited. The self-report Psychological General Well Being Index (PGWBI) was used to assess global PWB and the influence on six sub-domains: anxiety, depressed mood, positive well-being, self-control, general health, and vitality. We applied non-linear dimension-reduction techniques and regression methods to 45 variables in order to assess the main demographic, occupational, and general-health-related factors predicting PWB during the COVID-19 crisis. PGWBI score was higher in susceptible than in healthy workers, both as total score (mean 77.8 vs 71.3) and across almost all subscales. Age and jobs involving high social interaction before the pandemic were inversely associated with the PWB total score, general health, and self-control subscores. The current data suggest no decline in PWB during the second wave of COVID-19 health emergency in susceptible individuals of working age. Critically, higher risk for mental-health issues appears to be inversely related to age, particularly among individuals deprived of their previous level of social interaction at work

COVID19 outbreak in Lombardy, Italy: An analysis on the short-term relationship between air pollution, climatic factors and the susceptibility to SARS-CoV-2 infection

Short-term exposure to air pollution, as well as to climate variables have been linked to a higher incidence of respiratory viral diseases. The study aims to assess the short-term influence of air pollution and climate on COVID19 incidence in Lombardy (Italy), during the early stage of the outbreak, before the implementation of the lockdown measures. The daily number of COVID19 cases in Lombardy from February 25th to March 10th, 2020, and the daily average concentrations up to 15 days before the study period of particulate matter (PM10, PM2.5), O3, SO2, and NO2 together with climate variables (temperature, relative humidity – RH%, wind speed, precipitation), were analyzed. A univariable mixed model with a logarithm transformation as link function was applied for each day, from 15 days (lag15) to one day (lag1) before the day of detected cases, to evaluate the effect of each variable. Additionally, change points (Break Points-BP) in the relationship between incident cases and air pollution or climatic factors were estimated. The results did not show a univocal relationship between air quality or climate factors and COVID19 incidence. PM10, PM2.5 and O3 concentrations in the last lags seem to be related to an increased COVID19 incidence, probably due to an increased susceptibility of the host. In addition, low temperature and low wind speed in some lags resulted associated with increased daily COVID19 incidence. The findings observed suggest that these factors, in particular conditions and lags, may increase individual susceptibility to the development of viral infections such as SARS-CoV-2

Production of the polyhydroxyalkanoate PHBV from ricotta cheese exhausted whey by haloferax mediterranei fermentation

In the last decade, the dairy industry underwent a rapid expansion due to the increasing demand of milk-based products, resulting in high quantity of wastewater, i.e., whey and ricotta cheese exhausted whey (RCEW). Although containing high content of nutritional compounds, dairy by-products are still disposed as waste rather being reintroduced in a new production chain, hence leading to environmental and economic issues. This study proposes a new biotechnological approach based on the combination of membrane filtration and fermentation to produce poly-hydroxyalkanoates (PHA), biodegradable bioplastics candidate as an alternative to petroleum-derived plastics. The protocol, exploiting the metabolic capability Haloferax mediterranei to synthesize PHA from RCEW carbon sources, was set up under laboratory and pilot scale conditions. A multi-step fractionation was used to recover a RCEW fraction containing 12.6% (w/v) of lactose, then subjected to an enzymatic treatment aimed at releasing glucose and galactose. Fermentation conditions (culture medium for the microorganism propagation, inoculum size, time, and temperature of incubation) were selected according to the maximization of polymer synthesis, under in-flasks experiments. The PHA production was then tested using a bioreactor system, under stable and monitored pH, temperature, and stirring conditions. The amount of the polymer recovered corresponded to 1.18 g/L. The differential scanning calorimetry (DSC) analysis revealed the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as the polymer synthesized, with a relatively high presence of hydroxyvalerate (HV). Identity and purity of the polymer were confirmed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and X-ray photoelectron (XPS) spectroscopy analyses. By combining the fractionation of RCEW, one of the most abundant by-products from the agri-food industry, and the use of the halophile Hfx mediterranei, the production of PHBV with high purity and low crystallinity has successfully been optimized. The process, tested up to pilot scale conditions, may be further implemented (e.g., through fed-batch systems) and used for large-scale production of bioplastics, reducing the economical and environmental issues related the RCEW disposal

Evaluation of a semi-automated von willebrand factor multimer assay, the Hydragel 5 von Willebrand multimer, by two European Centers

Background The phenotypic diagnosis of von Willebrand disease (VWD) is a multistep process with classification dependent on the quantification of von Willebrand factor (VWF) multimeric structure. VWF multimer analysis is a technically challenging, lengthy and non‐standardised assay, usually performed in specialist laboratories. Recently, a new semi‐automated multimer assay, the Hydragel 5 von Willebrand multimers (H5VWM) has become available. Objectives This study, performed in two European centres, compared existing in‐house multimer assays to the H5VWM in individuals with and without VWD. Results Overall agreement of 91.1% was observed in 74 individuals with normal VWF levels, 57 patients grouped as type 1 VWD, 33 type 2A, 16 type 2B, 28 type 2M, 11 type 2N. Patients tested following Desmopressin or VWF concentrate, with thrombotic thrombocytopenic purpura and acquired von Willebrand syndrome were also evaluated. Many of the discrepancies between methods were in patients with genetic mutations linked to more than one type of VWD including p.R1374C/H and p.R1315C. Quantifiable multimer results were available within one working day. Densitometry improved the interpretation of the multimers with slight structural variations that were not apparent by visual inspection of the in‐house method. Conclusions 5VWM was a rapid, sensitive, standardised assay which used existing technology and could be included as an initial screen of VWF multimers in a VWD diagnostic algorithm in conjunction with traditional multimer analysis

Detection of Endosymbiont Candidatus Midichloria mitochondrii and Tickborne Pathogens in Humans Exposed to Tick Bites, Italy

: During 2021, we collected blood and serum samples from 135 persons exposed to tick bites in southern Italy. We serologically and molecularly screened for zoonotic tickborne pathogens and only molecularly screened for Candidatus Midichloria mitochondrii. Overall, 62 (45.9%) persons tested positive for tickborne pathogens. Coxiella burnetii was detected most frequently (27.4%), along with Rickettsia spp. (21.5%) and Borrelia spp. (10.4%). We detected Candidatus M. mitochondrii DNA in 46 (34.1%) participants who had statistically significant associations to tickborne pathogens (p<0.0001). Phylogenetic analysis of Candidatus M. mitochondrii sequences revealed 5 clades and 8 human sequence types that correlated with vertebrates, Ixodes spp. ticks, and countries in Europe. These data demonstrated a high circulation of tickborne pathogens and Candidatus M. mitochondrii DNA in persons participating in outdoor activities in southern Italy. Our study shows how coordinated surveillance among patients, clinicians, and veterinarians could inform a One Health approach for monitoring and controlling the circulation of tickborne pathogens