312 research outputs found
Wear behavior of a new composite formulation, with TEOS addition, for abrasive vitrified grinding wheels
Vitrified grinding wheels are used in many manufacturing industries to shape and finish metals and other materials in an efficient way. This work addresses a new approach with the use of tetraethyl orthosilicate solution (TEOS solution or silica sol), as an additive, in vitrified abrasive composites for grinding wheels. Different types of composite were produced using always the same materials and processing methods, but with different TEOS contents. Compared with a reference abrasive grinding wheel, the addition of TEOS promoted an improvement in the abrasive tool performance. The new formulation for vitrified abrasive composites showed better dimensional stability during processing (drying and sintering), and could be applied to the production of grinding tools with high dimensional accuracy. With the addition of 3.75 wt% of TEOS there was an increase in the strength of the matrix bonds. The porosity of the composite increased by 7% (from 43.6 to 46.9%), also improving its wear properties, with the quadrupling of the grinding ratio of the abrasive composite. In addition, the surface roughness of the composite decreased (from Ra = 22.9 to 8.4 μm) allowing to improve the surface finish of the workpieces.This work was supported by Programa Operacional Competitividade e Internacionalização , with the code POCI-01-0247-FEDER-038492.
This work was supported by FCT national funds, under the national
support to R&D units grant, through the reference project UIDB/04436/
2020 and UIDP/04436/2020
Effect of grooves and their geometry on the wear behavior of structured grinding wheels
The dry and wet wear behavior of different structured abrasive grinding wheels, with different grooves geometry, were investigated and compared with an unstructured abrasive composite. It was found that the grooves, as well as their geometry, play a decisive role in the wear behavior of abrasive composites.This work is within the scope of the Sharlane Costa Ph.D. degree in progress, financially supported by the Portuguese Foundation for Science and Technology (FCT) through the PhD grant reference 2021.07352.BD; this work is also supported by FCT national funds, under the national support to R&D units grant, through the reference project UIDB/04436/2020 and UIDP/04436/2020
Effect of biofunctionalized implant surface on osseointegration: a histomorphometric study in dogs
Among the different properties that influence bone apposition around implants, the chemical or biochemical composition of implant surface may interfere on its acceptance by the surrounding bone. The aim of this study was to investigate if a biofunctionalization of implant surface influences the bone apposition in a dog model and to compare it with other surfaces, such as a microstructured created by the grit-blasting/acid-etching process. Eight young adult male mongrel dogs had the bilateral mandibular premolars extracted and each one received 6 implants after 12 weeks, totaling 48 implants in the experiment. Four groups of implants were formed with the same microrough topography with or without some kind of biofunctionalization treatment. After histomorphometric analysis, it was observed that the modified microstructured surface with a "low concentration of the bioactive peptide" provided a higher adjacent bone density (54.6%) when compared to the other groups (microstructured + HA coating = 46.0%, microstructured only = 45.3% and microstructured + "high concentration of the bioactive peptide" = 40.7%), but this difference was not statistically significant. In conclusion, biofunctionalization of the implant surface might interfere in the bone apposition around implants, especially in terms of bone density. Different concentrations of bioactive peptide lead to different results.Entre as diferentes propriedades de uma superfície capazes de influenciar a deposição óssea ao redor de implantes, a composição química e bioquímica pode atuar no reconhecimento do tecido ósseo circundante. O presente trabalho investigou a influência da biofuncionalização de superfícies de implante na deposição óssea ao redor dos mesmos em um modelo animal, comparando-as com outras superfícies, como a microtexturizada obtida pelo processo de jateamento e ataque ácido. Metodologicamente, os pré-molares mandibulares bilaterais de 8 cães foram extraídos e após 12 semanas foram instalados 6 implantes em cada cão, constituindo uma amostra de 48 implantes. Dos 4 grupos experimentais de diferentes superfícies, todos continham a mesma microtopografia rugosa, porém possuindo ou não alguma biofuncionalização. A análise histomorfométrica revelou que a superfície microtexturizada modificada pela adição de baixa concentração peptídica obteve uma maior densidade óssea adjacente (54,6%) quando comparada aos outros grupos (microtexturizada + HA = 46%, somente microtexturizada = 45,3% e microtexturizada com adição de alta concentração peptídica = 40,7%), no entanto estas diferenças numéricas não foram estatisticamente significantes. Dentro deste contexto, conclui-se que a biofuncionalização da superfície de implantes pode interferir na aposição óssea, em particular na densidade óssea, e que diferentes concentrações peptídicas podem conduzir a diferentes resultados.FAPES
Infecção congênita pelo citomegalovírus em unidade neonatal de alto risco de um hospital universitário no Brasil: prevalência avaliada pela PCR e associação com alguns aspectos perinatais
Cytomegalovirus (CMV) infection is the most common congenital infection, affecting 0.4% to 2.3% newborns. Most of them are asymptomatic at birth, but later 10% develop handicaps, mainly neurological disturbances. Our aim was to determine the prevalence of CMV shed in urine of newborns from a neonatal intensive care unit using the polymerase chain reaction (PCR) and correlate positive cases to some perinatal aspects. Urine samples obtained at first week of life were processed according to a PCR protocol. Perinatal data were collected retrospectively from medical records. Twenty of the 292 cases (6.8%) were CMV-DNA positive. There was no statistical difference between newborns with and without CMV congenital infection concerning birth weight (p=0.11), gestational age (p=0.11), Apgar scores in the first and fifth minutes of life (p=0.99 and 0.16), mother's age (p=0.67) and gestational history. Moreover, CMV congenital infection was neither related to gender (p=0.55) nor to low weight (A citomegalovirose é das infecções congênitas mais prevalentes, acometendo de 0,4% a 2,3% dos nascidos vivos. A maioria dos recém-nascidos (RN) infectados é assintomática, mas até 10% desenvolvem seqüelas variadas, principalmente neurossensoriais. Objetivamos determinar a prevalência do CMV na urina de RN através da PCR, correlacionando-a a alguns achados perinatais. Analisamos amostras de urina colhidas na 1ª semana de vida de 292 RN do HC-UFMG, todos internados na unidade neonatal de alto risco. DNA viral foi amplificado segundo protocolo de PCR. Os dados perinatais foram colhidos retrospectivamente de registros médicos. Na população estudada, 20 dos 292 casos (6,8%) mostraram positividade para o DNA-CMV. Não houve diferença estatisticamente significante entre os RN com e os sem infecção congênita pelo CMV quanto a peso ao nascer (p=0,11), idade gestacional (p=0,11), índice de Apgar no 1º e 5º minutos (p=0,99 e 0,16), idade da mãe (p=0,67) e história gestacional materna. Também não se observou associação da infecção congênita pelo CMV com baixo peso ao nascer (p=0,13) ou sexo do RN (p=0,55). A alta prevalência da infecção congênita neste estudo (6,8%) pode ser devida à elevada sensibilidade da PCR, ao baixo nível sócio-econômico da população estudada ou às características clínicas mais graves desses RN
Treatment of gingival recessions in heavy smokers using two surgical techniques: a controlled clinical trial
Smokers have small root coverage which is associated with bad vascularity of periodontal tissues. This study evaluated a technique that can increase the blood supply to the periodontal tissues compared with a traditional technique. Twenty heavy smokers (10 males and 10 females) with two bilateral Miller class I gingival recessions received coronally positioned flaps in one side (Control group)and extended flap technique in the other side (Test group). Clinical measurements (probing pocket depth, clinical attachment level, bleeding on probing, gingival recession height, gingival recession width, amount of keratinized tissue, and width and height of the papillae adjacent to the recession) were determined at baseline, 3 and 6 months postoperatively. Salivary cotinina samples were taken as an indicator of the nicotine exposure level. No statistically significant differences (p>0.05) were detected for the clinical measurements or smoke exposure. Both techniques promoted low root coverage (Control group: 43.18% and Test group: 44.52%). In conclusion, no difference was found in root coverage between the techniques. Root coverage is possible and uneventful even, if rather low, in heavy smoker patients with low plaque and bleeding indices
La gestion démocratique des écoles: de l´autogouvernement à l’émergence d’une post-démocratie gestionnaire?
O autor assinala três elementos básicos que têm sido historicamente associados à gestão democrática das escolas: eleição, colegialidade, participação na decisão. A combinação ou rejeição de algumas dessas diferentes dimensões, em contextos sociais específicos, pode resultar em várias concepções de gestão
democrática das escolas, desde o autogoverno até à possível ascensão de uma pós-democracia gestionária.The author points out three basic elements that have been
historically associated with the democratic management of schools: election,
collegiality, participation in decision-making. The combination or the rejection
of some of those different dimensions in specific social contexts may result
in various conceptions of democratic management of schools, from selfgovernment
to the possible rise of a managerial post-democracyL’auteur souligne trois éléments de base qui ont été historiquement
associés à la gestion démocratique des écoles: l’élection, la collégialité, la
participation à la décision. La combinaison ou le rejet de certaines de ces
différentes dimensions, dans des contextes sociaux spécifiques, peuvent entraîner des diverses conceptions de la gestion démocratique des écoles, de l’autogouvernement à l’émergence d’une post-démocratie gestionnaire(undefined
Estimating dispersal and gene flow in the neotropical freshwater turtle Hydromedusa maximiliani (Chelidae) by combining ecological and genetic methods
Yield and vegetative growth of cactus pear at different spacings and under chemical fertilizations
Marine biotechnology in Brazil : recent developments and its potential for innovation
Marine biotechnology is an emerging field in Brazil and includes the exploration of marine microbial products, aquaculture, omics, isolation of biologically active compounds, identification of biosynthetic gene clusters from symbiotic microorganisms, investigation of invertebrate diseases caused by potentially pathogenic marine microbes, and development of antifouling compounds. Furthermore, the field also encompasses description of new biological niches, current threats, preservation strategies as well as its biotechnological potential. Finally, it is important to depict some of the major approaches and tools being employed to such end. To address the challenges of marine biotechnology, the Brazilian government, through the Ministry of Science, Technology, Innovation, and Communication, has established the National Research Network in Marine Biotechnology (BiotecMar) (www.biotecmar.sage.coppe.ufrj.br). Its main objective is to harness marine biodiversity and develop the marine bioeconomy through innovative research
- …