SUSUNAN KIMIA DJATI SERTA BERHUNGAN DENGAN TAKSONOMI DAN KATA HANNANJA TERHADAP INSEKTA

for investigating the special properties of toakwood,the thorough knowledge of the extractives is required. only 8 years age,merely two extractives of teak were know :secondary calcium phosphate and tectequinone.meanwhile, however,the knowladge has been greatly onlarged some 40 other compounds have been found, the chemical constitution of many of which has been determined The folloiwing extractives were found: 6 new anthraquinones, 5 naphthoquinonos,4 quinonos of still unknown structure, loaf-quinones ,2 nautral compounds with naphthalene rings (pierate formation )very small amounts of fatty oil (below 1%)consisting of 8 different fatty acidst Finally,The terpenoidalcompounds squalene betulic acid, one tiriterpeno C30 H48 O5 and two other terpenoids were found, The dchydronaphthol compounds, tectol and dehydrotecto1,clucidated in their constitution by decomposition and synthesi

Improving Inventory Management and Supply Chain of Diesel Fuel in Pertamina 5 Main Depots

Planning Operation subdivision at PT Pertamina has to generate supply decisions includingmain depot to supply, supply point and transportation mode. However, the variability inplanning a supply schedule renders the process of determining a supply decision asineffective. The last assessment on uncertainties was done at 2006 and has not beenconsidered during decision making process. On the other hand, the result of this researchindicates that the uncertainty level is too high to be ignored and the poor informationexchange between the regional offices and the head office decreases the Planning Operation\u27sability to create plans that covers the company condition. This paper proposes an appropriatesafety stock to withstand the uncertainties and a supply scheduling process that also considersuncertainties by using Monte-Carlo Simulation with random numbers to simulate the events inthe upcoming period

Negosiasi Kultural dan Musikal Dangdut Koplo pada Orkes Melayu Sonata di Jombang

Artikel ini membahas keberadaan unsur dalam dangdut yang jarang dibahas, yakni Orkes Melayu. Salah satu Orkes Melayu dengan trayektori yang panjang adalah Orkes Melayu Sonata. O.M. Sonata merupakan Orkes Melayu dari Jombang yang memiliki kontestasi yang cukup penting dalam jagat musik dangdut. Diawali pada tahun 1990, grup ini telah mengalami secara langsung konstelasi musik ketika itu. Alih-alih hanya menarasikan Orkes Melayu semata, penelitianini mengartikulasikan praktik negosiasi pada Orkes Melayu Sonata dengan menggunakankonsep habitus dari Pierre Bourdieu. Kerangka habitus Bourdieu membantu memetakan pola kreativitas musik dari O.M. Sonata. Metode yang dilakukan dalam penelitian ini adalah studi literatur dan etnografi. Hasil penelitian ini adalah artikulasi dari pembacaan Orkes Melayu secara diakronik. Hal ini menunjukkan pentingnya peran Orkes Melayu pada dangdut, serta mengartikulasikan kompleksitas pada musik yang kerap dianggap remeh, yakni musik populer

Pengaruh Substitusi Parsial Semen Dengan Abu Terbang Terhadap Karakteristik Teknis Beton

Partly or totally substitution of cement with another environmentally products in making concrete become the alternative. In this research the composition of the fly ash used as a partial replacement of cement in concrete as much as 40% out of total mass of cement (High Volume Fly Ash Concrete) and then will be compared with normal concrete about the technical characteristics of the two types of concrete. The purpose of this research was to determine the effect of partial replacement of cement with fly ash in concrete on technical characteristics of concrete which are specific gravity of concrete, compressive strength of concrete and concrete abrasion. The results obtained by the technical characteristics of concrete at the concrete age of 56 days for normal concrete has an average of specific gravity is 2434.39 kg/m³ with an average of compressive strength is 22.72 MPa and concrete abrasion percentage is 19.74%, for HVFA concrete has an average of specific gravity is 2407.22 kg/m³ with an average of compressive strength of 22.51 MPa and concrete abrasion percentage is 20.12%. The result of this research shows that the effect of the partial replacement of cement with fly ash in concrete produce the technical characteristics of concrete which are specific gravity of concrete, compressive strength of concrete and concrete abrasion are similliar with the technical characteristics of normal concrete

Perlindungan Hak Pekerja Askes Pasca Pembubaran PT Askes (Persero)

This article discusses about the Askes Workers rights protection after `dissolution without liquidation of PT. Askes (Persero), which The Askes Workers turned to BPJS Kesehatan workers. This research is yuridis normative by using secondary data. The results showed that the workers' rights protection after dissolution based on Law No.13 of 2003 and The Employment Agreement between Workers with PT. Askes (Persero). The workers' rights changes in BPJS Kesehatan requires the worker approval. Industrial disputes can be resolved through bipartite mechanism, non-litigation and litigation. Artikel ini membahas tentang perlindungan hak pekerja Askes pasca pembubaran PT Askes (Persero) tanpa likuidasi dimana pekerja Askes beralih menjadi Pekerja BPJS Kesehatan. Penelitian ini bersifat yuridis normatif yang menggunakan data sekunder. Hasil penelitian menunjukkan bahwa perlindungan hak-hak pekerja Askes pasca pembubaran PT Askes (Persero) berdasarkan UU No. 13 Tahun 2003 dan Perjanjian Kerja antara Pekerja dengan PT Askes (Persero) dimana Perubahan hak-hak pekerja memerlukan persetujuan dari Pekerja. Perselisihan hubungan industrial dapat timbul akibat pembubaran PT Askes (Persero) dapat diselesaikan melalui mekanisme bipartit, non litigasi maupun litigasi

INTEGRASI PROGRAM TEKLA STRUCTURES DAN SAP2000 DALAM PERENCANAAN GEDUNG BETON STRUKTURAL

Tekla Structures adalah sebuah program Building Information Modelling (BIM) yang berfungsi untuk membuat model dan menyimpan seluruh informasi sebuah struktur bangunan. Melalui Tekla Structure, sebuah struktur bangunan dapat dimodel tiga dimensi secara mendetail danuntuk melakukan analisis struktur dapat diintegrasikan dengan program desain analisis struktur lain seperti SAP 2000. Model awal dibuat pada Tekla Structure dan tahap analisa dan desain dilakukan pada SAP2000. Dari integrasi keduanya diperoleh berbagai kemudahan produk akhir yang sesuai dengan kebutuhan sebuah proyek antara lain gambar kerja, bill of material dan informasi-informasi detail lain. Keluaran yang dihasilkan Tekla Structure berupa gambar-gambar detail pelaksanaan, detail sambungan lengkap beserta daftar material dan volume sangat berguna dalam skala luas perencanaan maupun pelaksanaan kontruksi. Output volume yang didapat adalah berat total tulangan 65 Ton, volume total balok 6.77 m3 dengan berat total 16.248 Ton, volume total kolom 7.25 m3 dengan berat total 17.404 Ton dan volume total pelat 15.78 m3 dengan berat total 37.873 ton.Tekla Structures is a Building Information Modelling (BIM) program that serves to create models and store all the information of a building structure. Through Tekla Structure, a building structure can be modeled in three dimensions in detail and to perform structural analysis can be integrated with other structural analysis design programs such as SAP 2000. The initial Model was made on Tekla Structure and the analysis and design phase was done at SAP2000. From the integration are both obtained a wide range of final products to suit the needs of a project such as work drawings, Bill of material and other detailed information. The outputs generated by Tekla Structure are detailed pictures of the implementation, complete connection details and list of materials and volumes are very useful in the broad-scale planning and implementation of the construction. The Output volume obtained is the total weight of the reinforcement 65 Ton, the total volume of Beams 6.77 m3 with a total weight of 16,248 Ton, the total volume of the column 7.25 m3 with a total weight of 17,404 Ton and the total volume of the plate 15.78 m3 with a total weight of 37,873 tonnes

Business process management and supply chain collaboration: a critical comparison

The link between a firm and supply chain (SC) members has been recognised as one of the key issues for ensuring business success and achieving competitive advantage. Indeed, working across organisational boundaries is required to accomplish effective responses to customers’ needs. Our preliminary research confirmed that there are positive relationships between business process management (BPM), supply chain collaboration (SCC), collaborative advantage and organisational performance. This study is a step further and uses a multiple case design to illuminate the results and gain a greater understanding from extensive discussions about these relationships. By means of semi-structured interviews, the three main issues were identified as: (1) the link between BPM and organisational performance; (2) the link between BPM and SCC; and (3) the contextual factors and benefits achieved from working collaboratively with SC partners. The different scenarios of the link between BPM and SCC were developed in a taxonomy, and the case studies were used to illustrate the experience of intra- and inter-organisational practices in the developing economy of Thailand. The case studies’ results explain in depth that both BPM and SCC are important for improving organisational performance and competitiveness. BPM not only improves organisational performance directly, but also assists with collaborative activities that in turn help to improve internal capabilities. Additionally, the comparisons in issues relating to firm size, industry type, relationship closeness and relationship length were also included in this study