Modeling the stress dependence of magnetic hysteresis based on Stoner-Wohlfarth theory

© 2015 IEEE. This paper presents an improved approach for simulating magnetic hysteresis, which takes into account the effect of applied stress, based on an extended Stoner-Wohlfarth (S-W) model. Meanwhile, the S-W asteroid rotates and shrinks, and the stable direction of magnetization of the particle can be calculated from the new energy minimum conditions. This developed model is applied to analyze the magnetic hysteresis phenomenon of a soft magnetic composite (SMC) material under different compaction process, and the results of simulations are in good quantitative agreement with experimental data

Evolution of superconductivity in K2-xFe4+ySe5: Spectroscopic studies of X-ray absorption and emission.

This study investigates the evolution of superconductivity in K2-xFe4+ySe5 using temperature-dependent X-ray absorption and resonant inelastic X-ray scattering techniques. Magnetization measurements show that polycrystalline superconducting (SC) K1.9Fe4.2Se5 has a critical temperature (T c) of ∼31 K with a varying superconducting volume fraction, which strongly depends on its synthesis temperature. An increase in Fe-structural/vacancy disorder in SC samples with more Fe atoms occupying vacant 4d sites is found to be closely related to the decrease in the spin magnetic moment of Fe. Moreover, the nearest-neighbor Fe-Se bond length in SC samples exceeds that in the non-SC (NS) sample, K2Fe4Se5, which indicates a weaker hybridization between the Fe 3d and Se 4p states in SC samples. These results clearly demonstrate the correlations among the local electronic and atomic structures and the magnetic properties of K2-xFe4+ySe5 superconductors, providing deeper insight into the electron pairing mechanisms of superconductivity

An economic insight into additive manufacturing system implementation

With an ever growing diffusion of Additive Manufacturing (AM) system in industrial and commercial level, as well as the direct and indirect dynamics which are being introduced resulting from its inclusion as a possible production technology on companies’ portfolio, the need to reconfigure production system and adapt the production strategy becomes even more relevant than before. There are several studies which have emphasized on the importance of a paradigm shift in order to exploit advantages of AM, not only considering changes within design and functionality of the product, but also concerning AM’s impact on the entire value chain (re)configuration. Thus, it is of crucial importance to take into consideration that for this shift to be feasible and manageable, there is a need to include both technical and managerial aspects of manufacturing. This work proposes an economic insight in order to provide a guideline for the proper evaluation of AM system implementation. © IFIP International Federation for Information Processing 2015

Enhancement strategies for hydrogen production from wastewater: A review

© 2016 Bentham Science Publishers. This mini review focuses on the current developments in the field of dark fermentation technologies using wastewater as carbon and nutrient source in batch reactors. Besides, the major microbiota (pure, enriched mixed, co and mixed cultures) involved in the process have been emphasized. Additionally, problems associated with the lower production performances and the overcoming strategies applied to enhance the production rate (HPR) and yield (HY) bybio-augmentation, immobilization, enrichment technique and nano particles (NP) addition were also discussed. This mini review provides more insights about the recent developments in the dark fermentative hydrogen production (DHFP) process and their advantages in a brief manner. The perspective towards the development of sustainable society by using bioH2 technology is enlightened

On the implications of aerosol liquid water and phase separation for modeled organic aerosol mass

Water is an important component of PM2.5 Many traditional SOA species are highly soluble and thus can be considered extractable Water can influence the partitioning of compounds traditionally considered insoluble in models Organic aerosol takes up water according to RH Organic aerosol interacts with inorganic water Deviations in ideality (solubility) must be considered

Control of Crystal Morphology for Mold Flux During High-Aluminum AHSS Continuous Casting Process

In the present manuscript, the efforts to control the crystal morphology are carried out aiming at improving the lubrication of lime-alumina-based mold flux for casting advanced high-strength steel with high aluminum. Jackson alpha factors for crystals of melt crystallization in multi-component mold fluxes are established and reasonably evaluated by applying thermodynamic databases to understand the crystal morphology control both in lime-alumina-based and lime-silica-based mold fluxes. The results show that Jackson alpha factor and supercooling are the most critical factors to determine the crystal morphology in a mold flux. Crystals precipitating in mold fluxes appear with different morphologies due to their different Jackson alpha factors and are likely to be more faceted with higher Jackson alpha factor. In addition, there is a critical supercooling degree for crystal morphology dendritic transition. When the supercooling over the critical value, the crystals transform from faceted shape to dendritic ones in morphology as the kinetic roughening occurs. Typically, the critical supercooling degrees for cuspidine dendritic transition in the lime-silica-based mold fluxes are evaluated to be between 0.05 and 0.06. Finally, addition of a small amount of Li2O in the mold flux can increase the Jackson alpha factor and decrease the supercooling for cuspidine precipitation; thus, it is favorable to enhance a faceted cuspidine crystal.1132Ysciescopu

Impaired flush response to niacin skin patch among schizophrenia patients and their nonpsychotic relatives: The effect of genetic loading

We previously reported familial aggregation in flush response to niacin skin patch among schizophrenia patients and their nonpsychotic relatives. However, little is known about whether this abnormal skin response is associated with genetic loading for schizophrenia. This study compared the niacin flush response in subjects from families with only one member affected with schizophrenia (simplex families) with those from families having a sib-pair with schizophrenia (multiplex families). Subjects were patients with schizophrenia and their nonpsychotic first-degree relatives from simplex families (176 probands, 260 parents, and 80 siblings) and multiplex families (311 probands, 180 parents, and 52 siblings) as well as 94 healthy controls. Niacin patches of 3 concentrations (0.001M, 0.01M, and 0.1M) were applied to forearm skin, and the flush response was rated at 5, 10, and 15 minutes, respectively, with a 4-point scale. More attenuated flush response to topical niacin was shown in schizophrenia probands and their relatives from multiplex families than in their counterparts from simplex families, and the differentiation was better revealed using 0.1M concentration of niacin than 0.01M or 0.001M. For the highest concentration of 0.1M and the longest time lag of 15 minutes, a subgroup of probands (23%), parents (27%), and siblings (19%) still exhibited nonflush response. Flush response to niacin skin patch is more impaired in schizophrenia patients and their relatives from families with higher genetic loading for schizophrenia, and this finding has implications for future genetic dissection of schizophrenia. © 2008 The Authors.published_or_final_versio

Polymorphism of the pig-implantation protein 3 (preis3) gene and its association with litter size traits

The pre-implantation protein 3 (prei3), which might play a role in pre-implantation embryogenesis, is one of the promising candidate genes for litter size traits in pigs. In this study, a single nucleotide polymorphism (SNP: T802G) in intron 6 of the pig prei3 gene was detected and a genotyping assay for this SNP was developed. An association study for this SNP with litter size was performed in two independent populations. One population consisted of crossbred sows derived from Landrace, Large White, Chinese Tongcheng and/or Chinese Meishan (Line DIV). The other population constituted of crossbred animals derived from Chinese Qingping and Duroc (QD). Statistical analysis demonstrated that, in first parity, 2.65 more piglets were born and 3.82 more piglets were born alive in sows in Line DIV with genotype TT than with genotype GG. For second and subsequent litters, in both the DIV and QD lines there were significant differences in the number of piglets born alive between TG and GG sows, with the TG sows producing more piglets born alive than the GG sows. These results suggest that the prei3 SNP is significantly associated with litter size in the two populations studied, and could be useful in selection for increasing litter size in pigs. Further investigations on more pig populations with large sample sizes are needed to confirm this. South African Journal of Animal Science Vol. 36(3) 2006: 209-21