Simulations for Multi-Object Spectrograph Planet Surveys

Radial velocity surveys for extra-solar planets generally require substantial amounts of large telescope time in order to monitor a sufficient number of stars. Two of the aspects which can limit such surveys are the single-object capabilities of the spectrograph, and an inefficient observing strategy for a given observing window. In addition, the detection rate of extra-solar planets using the radial velocity method has thus far been relatively linear with time. With the development of various multi-object Doppler survey instruments, there is growing potential to dramatically increase the detection rate using the Doppler method. Several of these instruments have already begun usage in large scale surveys for extra-solar planets, such as FLAMES on the VLT and Keck ET on the Sloan 2.5m wide-field telescope. In order to plan an effective observing strategy for such a program, one must examine the expected results based on a given observing window and target selection. We present simulations of the expected results from a generic multi-object survey based on calculated noise models and sensitivity for the instrument and the known distribution of exoplanetary system parameters. We have developed code for automatically sifting and fitting the planet candidates produced by the survey to allow for fast follow-up observations to be conducted. The techniques presented here may be applied to a wide range of multi-object planet surveys.Comment: 15 pages, 10 figures, accepted for publication in MNRA

Optimization of Al/AlOx/AlAl/AlO_x/Al-Layer Systems for Josephson Junctions from a Microstructure Point of View

$Al/AlO_x/Al$-layer systems are frequently used for Josephson junction-based superconducting devices. Although much work has been devoted to the optimization of the superconducting properties of these devices, systematic studies on influence of deposition conditions combined with structural analyses on the nanoscale are rare up to now. We have focused on the optimization of the structural properties of $Al/AlO_x/Al$-layer systems deposited on Si(111) substrates with a particular focus on the thickness homogeneity of the $AlO_x$-tunnel barrier. A standard high-vacuum electron-beam deposition system was used and the effect of substrate pretreatment, different Al-deposition temperatures and Al-deposition rates was studied. Transmission electron microscopy was applied to analyze the structural properties of the $Al/AlO_x/Al$-layer systems to determine the thickness homogeneity of the $AlO_x$ layer, grain size distribution in the Al layers, Al-grain boundary types and the morphology of the $Al/AlO_x$ interface. We show that the structural properties of the lower Al layer are decisive for the structural quality of the whole $Al/AlO_x/Al$-layer system. Optimum conditions yield an epitaxial Al(111) layer on a Si(111) substrate with an Al-layer thickness variation of only 1.6 nm over more than 10 $\mu m$ and large lateral grain sizes up to 1 $\mu m$. Thickness fluctuations of the $AlO_x$-tunnel barrier are minimized on such an Al layer which is essential for the homogeneity of the tunnel current. Systematic variation of the Al-deposition rate and deposition temperature allows to develop an understanding of the growth mechanisms

Finite-size and pressure effects in YBa_2Cu_4O_8 probed by magnetic field penetration depth measurements

We explore the combined pressure and finite-size effects on the in-plane penetration depth \lambda_{ab} in YBa_2Cu_4O_8. Even though this cuprate is stoichiometric the finite-size scaling analysis of \lambda_{ab}^{-2}(T) uncovers the granular nature and reveals domains with nanoscale size L_{c} along the c-axis. L_{c} ranges from 33.2 Angstrom to 28.9 Angstrom at pressures from 0.5 to 11.5 kbar. These observations raise serious doubts on the existence of a phase coherent macroscopic superconducting state in cuprate superconductors.Comment: 7 pages, 6 figure

Specific protein-protein binding in many-component mixtures of proteins

Proteins must bind to specific other proteins in vivo in order to function. The proteins must bind only to one or a few other proteins of the of order a thousand proteins typically present in vivo. Using a simple model of a protein, specific binding in many component mixtures is studied. It is found to be a demanding function in the sense that it demands that the binding sites of the proteins be encoded by long sequences of bits, and the requirement for specific binding then strongly constrains these sequences. This is quantified by the capacity of proteins of a given size (sequence length), which is the maximum number of specific-binding interactions possible in a mixture. This calculation of the maximum number possible is in the same spirit as the work of Shannon and others on the maximum rate of communication through noisy channels.Comment: 13 pages, 3 figures (changes for v2 mainly notational - to be more in line with notation in information theory literature

The Brightest Lyα\alpha Emitter: Pop III or Black Hole?

CR7 is the brightest $z=6.6 \, {\rm Ly}\alpha$ emitter (LAE) known to date, and spectroscopic follow-up by Sobral et al. (2015) suggests that CR7 might host Population (Pop) III stars. We examine this interpretation using cosmological hydrodynamical simulations. Several simulated galaxies show the same "Pop III wave" pattern observed in CR7. However, to reproduce the extreme CR7 ${\rm Ly}\alpha$/HeII1640 line luminosities ($L_{\rm \alpha/He II}$) a top-heavy IMF and a massive ($>10^{7}{\rm M}_{\odot}$) PopIII burst with age $<2$ Myr are required. Assuming that the observed properties of ${\rm Ly}\alpha$ and HeII emission are typical for Pop III, we predict that in the COSMOS/UDS/SA22 fields, 14 out of the 30 LAEs at $z=6.6$ with $L_{\alpha} >10^{43.3}{\rm erg}\,{\rm s}^{-1}$ should also host Pop III stars producing an observable $L_{\rm He II}>10^{42.7}{\rm erg}\,{\rm s}^{-1}$. As an alternate explanation, we explore the possibility that CR7 is instead powered by accretion onto a Direct Collapse Black Hole (DCBH). Our model predicts $L_{\alpha}$, $L_{\rm He II}$, and X-ray luminosities that are in agreement with the observations. In any case, the observed properties of CR7 indicate that this galaxy is most likely powered by sources formed from pristine gas. We propose that further X-ray observations can distinguish between the two above scenarios.Comment: 6 pages, 4 figure

Characterization of low loss microstrip resonators as a building block for circuit QED in a 3D waveguide

Here we present the microwave characterization of microstrip resonators made from aluminum and niobium inside a 3D microwave waveguide. In the low temperature, low power limit internal quality factors of up to one million were reached. We found a good agreement to models predicting conductive losses and losses to two level systems for increasing temperature. The setup presented here is appealing for testing materials and structures, as it is free of wire bonds and offers a well controlled microwave environment. In combination with transmon qubits, these resonators serve as a building block for a novel circuit QED architecture inside a rectangular waveguide

Toward an accurate mass function for precision cosmology

Cosmological surveys aim to use the evolution of the abundance of galaxy clusters to accurately constrain the cosmological model. In the context of LCDM, we show that it is possible to achieve the required percent level accuracy in the halo mass function with gravity-only cosmological simulations, and we provide simulation start and run parameter guidelines for doing so. Some previous works have had sufficient statistical precision, but lacked robust verification of absolute accuracy. Convergence tests of the mass function with, for example, simulation start redshift can exhibit false convergence of the mass function due to counteracting errors, potentially misleading one to infer overly optimistic estimations of simulation accuracy. Percent level accuracy is possible if initial condition particle mapping uses second order Lagrangian Perturbation Theory, and if the start epoch is between 10 and 50 expansion factors before the epoch of halo formation of interest. The mass function for halos with fewer than ~1000 particles is highly sensitive to simulation parameters and start redshift, implying a practical minimum mass resolution limit due to mass discreteness. The narrow range in converged start redshift suggests that it is not presently possible for a single simulation to capture accurately the cluster mass function while also starting early enough to model accurately the numbers of reionisation era galaxies, whose baryon feedback processes may affect later cluster properties. Ultimately, to fully exploit current and future cosmological surveys will require accurate modeling of baryon physics and observable properties, a formidable challenge for which accurate gravity-only simulations are just an initial step.Comment: revised in response to referee suggestions, MNRAS accepte

Galaxy formation with radiative and chemical feedback

Here we introduce GAMESH, a novel pipeline which implements self-consistent radiative and chemical feedback in a computational model of galaxy formation. By combining the cosmological chemical-evolution model GAMETE with the radiative transfer code CRASH, GAMESH can post process realistic outputs of a N-body simulation describing the redshift evolution of the forming galaxy. After introducing the GAMESH implementation and its features, we apply the code to a low-resolution N-body simulation of the Milky Way formation and we investigate the combined effects of self-consistent radiative and chemical feedback. Many physical properties, which can be directly compared with observations in the Galaxy and its surrounding satellites, are predicted by the code along the merger-tree assembly. The resulting redshift evolution of the Local Group star formation rates, reionisation and metal enrichment along with the predicted Metallicity Distribution Function of halo stars are critically compared with observations. We discuss the merits and limitations of the first release of GAMESH, also opening new directions to a full implementation of feedback processes in galaxy formation models by combining semi-analytic and numerical methods.Comment: This version has coloured figures not present in the printed version. Submitted to MNRAS, minor revision

Implications of the isotope effects on the magnetization, magnetic torque and susceptibility

We analyze the magnetization, magnetic torque and susceptibility data of La2-xSrxCu(16,18)O4 and YBa2(63,65)CuO7-x near Tc in terms of the universal 3D-XY scaling relations. It is shown that the isotope effect on Tc mirrors that on the anisotropy. Invoking the generic behavior of the anisotropy the doping dependence of the isotope effects on the critical properties, including Tc, correlation lengths and magnetic penetration depths are traced back to a change of the mobile carrier concentration.Comment: 5 pages, 3 figure

Influence of point defects on magnetic vortex structures

We employed micro-Hall magnetometry and micromagnetic simulations to investigate magnetic vortex pinning at single point defects in individual submicron-sized permalloy disks. Small ferromagnetic particles containing artificial point defects can be fabricated by using an image reversal electron beam lithography process. Corresponding micromagnetic calculations, modeling the defects within the disks as holes, give reasonable agreement between experimental and simulated pinning and depinning field values