Multiple pregnancy: epidemiology and association with maternal and perinatal morbidity

sem informaçãoTwin pregnancy accounts for 2 to 4% of total births, with a prevalence ranging from 0.9 to 2.4% in Brazil. It is associated with worse maternal and perinatal outcomes. Many conditions, such as severe maternal morbidity (SMM) (potentially life-threatening409554562sem informaçãosem informaçãosem informaçã

Sliding wear of a-C:H coatings against alumina in corrosive media

This paper reports the results obtained from the study of friction and sliding wear in two corrosive solutions of an a-C:H coating deposited on 316L stainless against an alumina ball, employed as static counter part. Calculations of the values of the von Mises stresses developed at the coating–substrate interface, as soon as the ball touches the coated sample, and how this state of stress influences the response of the coated system under the corrosion environment, are presented and discussed. The results obtained from these calculations, as well as from the experiments conducted in the present research, are compared with other experiments published in the literature, where a-C:H coatings deposited on different substrates and with different coating architectures were tested in similar corrosive media. It has been determined that in those systems, where the von Mises stress in the coating, found in the vicinity of the interface, exceeds the threshold value of approximately 370MPa, coating failure with spallation will take place, regardless of the substrate nature on which this coating has been deposited. From this analysis it has been concluded that the coating yield strength is of utmost importance in conferring the a-C:H coated system there quired stability in a corrosive solution

Twin pregnancy in brazil: a profile analysis exploring population information from the national birth e-registry on live births

sem informaçãoBirth records as SINASC (Brazilian Live Birth Information System) are highlighted in uncommon conditions such as twin pregnancy whose prevalence rarely exceeds 2 to 3% of the total number of births. The objective of this study was to assess the prevalence110sem informaçãosem informaçãosem informaçã

New and rare records of teleost fishes from the Cape Verde Islands (eastern-central Atlantic Ocean)

As a result of six exploratory surveys and several opportunistic catches in the Cape Verde Islands from a few metres to about 1000 m of depth, a list of 66 species of teleost fishes is given, six of which are first records from the archipelago: Gnathophis mystax (Congridae), Nezumia africana, Nezumia duodecim (Macrouridae), Ectreposebastes imus (Scorpaenidae), Paraliparis sp. (Liparidae) and Lappanella fasciata (Labridae). Additionally, data on six poorly-known species is also given: Myroconger compressus (Myrocongridae), Myrichthys pardalis, Phaenomonas longissima (Ophichthidae), Sphagemacrurus hirundo (Macrouridae), Gadella imberbis and Physiculus cyanostrophus (Moridae). Data includes distribution, habitat, morphometry and reproduction.Six campagnes exploratoires ainsi que quelques captures opportunistes réalisées de quelques mètres jusqu’à environ 1000 m de profondeur aux îles du Cap-Vert ont permis d’établir une liste comprenant 66 espèces de poissons téléostéens. Six espèces sont signalées pour la première fois aux îles du Cap-Vert : Gnathophis mystax (Congridae), Nezumia africana, Nezumia duodecim (Macrouridae), Ectreposebastes imus (Scorpaenidae), Paraliparis sp. (Liparidae) et Lappanella fasciata (Labridae). La présence de six autres espèces mal connues est confirmée pour cet archipel : Myroconger compressus (Myrocongridae), Myrichthys pardalis, Phaenomonas longissima (Ophichthidae), Sphagemacrurus hirundo (Macrouridae), Gadella imberbis et Physiculus cyanostrophus (Moridae). Les données présentées concernent la distribution, l’habitat, la morphométrie et la reproduction.Postprin

The striped soldier shrimp Plesionika edwardsii (Crustacea:Decapoda:Pandalidae) from the cape Verde Islands

This study is part of the PROACTIVA 1-2 (2009-2012) and MARPROF-CV (2010-2014) projects, in the framework of the Canary Islands Government and UE PCT MAC 2007-2013 programmes respectively. Research has mainly focused on the stock assessment of the striped soldier shrimp, Plesionika edwardsii (Brandt, 1851), because it has shown moderate to high levels of fishing yield and abundances compatible with the development of a new sustainable fishery in the Cape Verde Islands. Cruises took place on board the R/V Prof. Ignacio Lozano. Four 15-day surveys have been conducted to date: Cabo Verde 2010-04 (April 2010), Camar˜ao-1 (November 2011), Camar˜ao-2 (Mars 2012) and Camar ˜ao-3 (July 2012). An innovative fishing gear so-called multiple semi-floating shrimp trap (MSFST) was used. Each fishing line was composed by 40-65 traps operating around 2.4 m above the seafloor, using Decapterus macarellus (Carangidae) as unique bait of the traps. Fishing depth was 66-458 m, and efective fishing time was 16-18 h. Each trap was attached to the main bottom line every 15 m, and the maximum attraction of this bait was established to be 100 or 150 m, according to the experience gained from the local fishery for deep-sea lobsters. So density by area was calculated assuming two different areas of attraction of the fishing gear. Initial biomass was estimated from depletion experiments at different abundance stations by applying the Leslie & Davis (1939) method, modified by Ricker (1975). Each fishing operation was classified according to its yield (CPUE in g/trap/night). The potential fishing planar area was estimated between the isobathymetric lines between 90 and 220 m. Total biomasses (Bt) were calculated from areas (km2) and mean minimum/maximum densities (kg/km2). Maximum sustainable yield (MSY) was estimated from Bt using the Beddington and Cooke (1983) model by entering natural mortality (0.6), growth rate (0.53 year�1) and recruitment age (1.32 year), which are the parameters for this target species published for the Canaries. These parameters estimate a biological exploitation rate ( ) of 0.262. Interpolations were applied to estimate MSY for insular stocks representing lesser than 5% of the total fishing grounds for this species in the archipelago. The MSY estimated by depletion were 30.5 tons/year for the stock of S˜ao Vicente, Santa Luzia, Ilheus and S˜ao Nicolau, 10 tons/year for the stock of Santiago, 138.8 tons/year for the stock of Boa Vista and Maio, and 5.6 tons/year for the stock of Sal. The small stocks estimated by interpolation were: 4.5 tons/year for the stock of Santo Ant˜ao, 1.3 tons/year for the stock of Fogo, and 1.8 tons/year for the stock of Brava and Ilheus. In total, 192.5 tons per year was the total MSY for the striped soldier shrimp around the islands of the Cape Verde archipelago, occupying a total area of 1,918 km2 of new fishing grounds at between 90 and 220 m of depth. In comparison with the traditional bottom trap used in the Canary Islands, the innovative fishing gear MSFST were proved to be more selective for pandalid shrimps, minimizing the gear impact on the seafloor as well as the by-catch by reducing the discards. Depletion methods are based on the assumption of a closed system, that is with minimum or zero immigration between neighbouring areas. The straight forward decline of CPUEs obtained during the depletion experiments seems to confirm that P. edwardsii is a low mobility species, making this assumption valid at least during short-time periods. Because of the bathymetry profile of these islands,the depth range is from very close (few nautical miles in Santiago) to far away (10-12 n.m. in Boa Vista) to the coastline. Fishing effort should be controlled on the basis of quotas, number of fishing vessels and a precautionary approach in order to ensure that catching is commensurate with sustainable levels of exploitation. MSY estimates suggest that this new Capeverdean fishery should be carried out by specialized medium-sized fishing vessels. During the last decades a combination of shrimp trawling and industrial trapping activity has threatened over-exploitation in the Mediterranean fisheries targeting on P. edwardsii; currently the shrimp collapse has conducted to the decline of these fisheries. Can the Cape Verde regulatory bodies and all the stakeholders involved learn the lessons this teaches us about this resource management

By-catch composition of the striped soldier shrimp Plesionika edwardsii (Crustace: Decapoda: Pandalidae) experimental fishery in the Cape Verde Islands

This work focuses on the by-catch composition of Plesionika edwardsii experimental fishery in the Cape Verde Islands. Obtaining information on abundance, composition and lifecycle of species involved in this potential fishery is useful, in order to ensure its sustainable development under an ecosystem approach. The first step towards this goal is the description of catches. Four 15-day research surveys were conducted on board the R/V Prof. Ignacio Lozano: April 2010 (S˜ao Vicente and Santa Luzia islands), November 2011 (Santiago island), March 2012 (Boa Vista island,) and July 2012 (Sal and S˜ao Nicolau islands). The working depths were between 66 and 458 m depth. A standardized innovative fishing gear was used, so-called multiple semi-floating shrimp traps. Each fishing line was composed by 40-65 traps operating around 2.4 m above the seafloor, using Decapterus macarellus (Carangidae) as unique bait of the traps. Multiple semi-floating shrimp traps is a passive fishing system that allows catch and release sea significant part of the unwanted catches, as in the case of Chondrichthyes or Anguilliformes, reducing the fishing impact on non-target species. The main by-catch was composed of 53 species belonging to three groups including Chondrichthyes (three families and three species), Crustacea (11 families and 19 species) and Osteichthyes (15 families and 29 species). Plesionika edwardsii, the target species of this fishery, represented 97.8% of the catch in terms of abundance and 40.1% in biomass. By-catch represented 59.9% of total catch in terms of biomass. Osteichthyes (87.5%) were the dominant group and was represented by the following main families; Sparidae (33.9%), Moridae (32.5%), Muraenidae (32.5%), Scorpaenidae (9.9%) and Tetraodontidae (9.8%). Chondrichthyes (11.6%) were composed by Centrophoridae (65.3%) and Triakidae (34.1%). Finally, Crustacea (1.9%) were chiefly composed by Pandalidae (79.1%). However, different families represented by specific species were found to be dominant around each island. Sparidae were the dominant family represented by Pagellus acarne (46.2% of total by-catch) at S˜ao Vicente, and by Dentex macrophthalmus (42.6%) at Boa Vista. Tetraodontidae with Sphoeroides pachygaster (25.9%) and Sparidae with P. acarne (25.1%) were the co-dominant families in the by-catch around Santa Luzia. Muraenidae were the dominant family represented by Gymnothorax polygonius (69.4%) at Sal, and by Muraena helena (63.4%) at S˜ao Nicolau. Finally, Scorpaenidae with Pontinus kuhlii (22.3%) and Moridae with Physiculus cyanostrophus (22.1%) were the co-dominant families of the bycatch around Santiago. Acknowledgements: This study is part of the PROACTIVA 1-2 (2009-2012) and MARPROF-CV (2010-2014) projects, in the framework of the Canary Islands Government and UE PCT MAC 2007- 2013 programmes respectively

Increase of the load carrying capacity of aluminium 2024-T3 by means of a NiP-CRC-DLC coating

The present investigation has been conducted in order to evaluate the tribological behavior of an AA2024-T3 aluminum alloy, coated with a NiP-CrC-DLC coating. The effect of NiP as intermediate layer was evaluated by carrying out calculations using ELASTICA © in order to determine its adequate thickness needed to avoid the plastic deformation of the substrate, ensuring then the integrity of the coating. To evaluate the efficiency of these calculations, a number of dry sliding wear tests were performed employing a ball-on-disk configuration, where alumina balls of 6 mm in diameter were used as counterpart. The sliding wear tests were carried out up to a sliding distance of 800 m, with a normal load of 5 N, a linear speed of 5 cm/s and a contact radius of 3 mm. The wear tracks were analyzed by means of scanning electron microscopy (SEM) techniques coupled with energy dispersive spectroscopy (EDS). The wear volume was determined by means of optical profilometry. The results indicate that, under the present testing conditions, the NiP-CrC-DLC coating exhibits a satisfactory behavior from the mechanical stability point of view when the thickness of the NiP layer is higher than 60 µm, since no surface failures were observed at the end of the tests. For the coated system, the magnitude of the friction coefficient was found to be of approximately 0.1 and that of the wear rate was of about 2.31 ± 0.09 x 10-16 m3/N.m. On the contrary, for the uncoated substrate, the friction coefficient was of approximately 0.5 and the wear rate of 5.46 x 10-13 m3/N.m, that is to say, 3 orders of magnitude greater than that determined for the coated system

The Atlantic Chub Mackerel (Scomber colias) in the Canary Islands (Spain): Fishery and Biological data Update

En prens

Sliding wear resistance of thermal sprayed wc-12co coatings reinforced with carbon nanotubes

Thermal sprayed coatings based on WC-Co are widely used for providing wear resistance to engineering components. The High Velocity Oxygen Fuel (HVOF) thermal spraying technique is one of the most commonly employed for depositing wear resistant coatings on steel substrates and constitutes one of the coating processes that have been technically validated for the replacement of electrolytic hard chrome (EHC) coatings, especially for extreme operating conditions. The present work aims at studying the tribological behavior, under sliding wear conditions, of a coating based on WC-12Co, with and without the reinforcement of carbon nanotubes (CNTs). The coating has been deposited by HVOF thermal spraying on a SAE 1045 substrate steel. Wear tests were carried out under the ball-on-disk configuration, at a constant sliding velocity of ∼ 0.2 m.s-1 and an applied load of 10 N, employing WC-6Co balls as static counterparts. The results for the CNTs reinforced coating have shown a decrease of ∼ 58% and 86% in the values of the average friction coefficient and wear rate, respectively, as compared with the conventional coatings. The observed wear mechanism was mainly of an abrasive type

Estudos sobre a nutrição mineral do cafeeiro: XL. Fitomassa e conteúdo de macro e micronutrientes no material podado

An experiment has carried out in commercial coffee plantation (varie ty Mundo Novo, 7 years old, 1904 "covas" per ha, previous yield 3,180 kg cleancoffe, Ipanema Agro Indústria S.A., Alfenas, MG, Brazil) designed to estimate the quantities of biomass, macro and micronutrients there in, removed by different types of pruning, namely: (1) stumping at 0,40 m above ground;(2) capping at 1,00 m; (3) capping at 1,50 m; (4) capping at 2,00 m; (5) capping at 1,50 m and cutting of laterals at 15 cm from the main stem. Analyses of data and material allowed for the following conclusions to be drawn. (1) Biomass removed by pruning was higher when pruning was done by stumping (24.3 tons of fresh weight and 11.9 tons dry weight) and by capping at 1,00 m above ground (20.6 and 10.1 tons, respectively); these treatments were followed by capping at 1,50 m plus cutting off laterals which yielded 19.4 and 8.3 tons of fresh and dry weight; the fresh and try weight corresponding to capping at 1,50 and 2,00 m above ground were: 12.1 and 5.4, 5.6 and 2.5 tons por hectare. (2) Simple regression equations describe with a high degree of significance the relationship between height of pruning and biomass removed there off. (3) The amount of macro and micronutrients, as expected, relate well with the quantity of plant material which corresponds to each treatment. Total amounts for macronutrients were, according to the order of the treatments given above (in kg/ha): N - 320; 294; 162; 80 and 261; P - 18; 15; 10; 44 and 16; K - 286; 266; 168; 78 and 273; Ca - 149; 139; 63; 33 and 101; Mg - 30; 33; 16; 8 and 26; S - 10; 7; 6; 3 and 10. In the same order, the amounts of micronutrients were, in g/ha: B - 306; 337; 163; 83 and 268; Cu - 229; 219; 121; 51 and 191; Fe - 2783; 2328; 1367; 544 and 2088; Mn - 437; 779; 264; 142 and 412; Zn - 174; 152; 74; 28 and 121. (4) Simple regression equations were derived which express the relationship between quantities of macro and micronutrients removed and the heighth of pruning. (5) Recycling of the biomass curt off fy pruning could contribute to savings in the rates of fertilizer to be applied in the period of regrowth. Most of the nutrients, however, from two thirds to three fourths of the total, are found in branches and stems which is likely to more slonly released.Foi conduzido um ensaio numa plantação comercial de café de variedade Mundo Novo de 9 anos de idade, com uma população de 1904 covas/ha, destinada a avaliar a quantidade de biomassa e de nutrientes removidas por diferentes tipos de poda: recepa a 0,40m; decote a 1,00, 1,50 e 2,00 m; decote a 1,50m com esqueletamento. A análise do material e dos dados permitiu tirar-se as seguintes conclusões: (1) a biomassa removida pela poda foi maior na recepa (24,3 t de matéria fresca e 11,9 de matéria seca) e no decote a 1,00 m (20,6 e 10,1 t, respectivamente); seguia-se o decote a 1,50 m com esqueletamento que deu 19,4 e 8,3 t de matéria fresca e seca por hectare; os pesos da matéria fresca e seca correspondentes aos decotes a 1,50 m e 2,00 m foram: 12,1 e 5,4; 5,6 e 2,5 t/ha; (2) a relação existente entre a altura de poda e quantidade de fitomassa removida é descrita por equações de regressão simples; (3) as quantidades de nutrientes removidas são proporcionais as quantidades de material podado sendo as seguintes de acordo com a ordem dos tratamentos dado, em kg/ha: N - 320, 294, 162, 80 e 261; P - 18, 15, 10, 44 e 16; K - 286, 266, 168, 78 e 273; Ca - 149, 139, 63, 33 e 101: Mg - 30, 33, 16, 8 e 26; S - 10, 7,6, 3 e 10; as quantidades de micronutrientes removidas foram, em g/ha: B - 306, 337, 163, 83 e 268; Cu - 229, 219, 121, 51 e 191; Fe - 2783, 2328, 1367, 544 e 2,088; Mn - 437, 779, 264, 142 e 412; Zn - 174, 152, 74, 28 e 121; (3) foram derivadas equações de regressão simples que relacionam quantidade extraídas e altura da poda; (4) a reciclagem de fitomassa contribui com economia substancial de fertilizantes para a nova vegetação. Cerca de dois terços e três quartos de nutrientes, entretanto, estão contidos no material lenhoso de caules e ramos o que deve fazer que a sua disponibilidade seja mais lenta