2,411 research outputs found
Effective Dynamic Range in Measurements with Flash Analog-to-Digital Convertor
Flash Analog to Digital Convertor (FADC) is frequently used in nuclear and
particle physics experiments, often as the major component in big multi-channel
systems. The large data volume makes the optimization of operating parameters
necessary. This article reports a study of a method to extend the dynamic range
of an 8-bit FADC from the nominal value. By comparing the integrated
pulse area with that of a reference profile, good energy reconstruction and
event identification can be achieved on saturated events from CsI(Tl) crystal
scintillators. The effective dynamic range can be extended by at least 4 more
bits. The algorithm is generic and is expected to be applicable to other
detector systems with FADC readout.Comment: 19 pages, 1 table, 10 figure
Validity of the scaling functional approach for polymer interfaces as a variational theory
We discuss the soundness of the scaling functional (SF) approach proposed by
Aubouy Guiselin and Raphael (Macromolecules 29, 7261 (1996)) to describe
polymeric interfaces. In particular, we demonstrate that this approach is a
variational theory. We emphasis the role of SF theory as an important link
between ground-state theories suitable to describe adsorbed layers, and
"classical" theories for polymer brushes.Comment: 8 pages, 1 figure, to be published in Phys. Rev.
Effect of alloying elements on magnesium alloy damping capacities at room temperature
Alloying is a good approach to increasing its strength but leads to a reduction of damping to pure magnesium. Classifying the alloying characteristics of various alloying elements in magnesium alloys and their combined effects on the damping and mechanical properties of magnesium alloys is important. In this paper, the properties of the Mg-0.6wt%X binary alloys were analyzed through strength measurements and dynamic mechanical analysis. The effects of foreign atoms on solid-solution strengthening and dislocation damping were studied comprehensively. The effect of solid solubility on damping capacity can be considered from two perspectives: the effect of single solid-solution atoms on the damping capacities of the alloy, and the effect of solubility on the damping capacities of the alloy. The results provide significant information that is useful in developing high-strength, high-damping magnesium alloys. This study will provide scientific guidance regarding the development of new types of damping magnesium alloys
Antibubbles and fine cylindrical sheets of air
Drops impacting at low velocities onto a pool surface can stretch out thin hemispherical sheets of air between the drop and the pool. These air sheets can remain intact until they reach submicron thicknesses, at which point they rupture to form a myriad of microbubbles. By impacting a higher-viscosity drop onto a lower-viscosity pool, we have explored new geometries of such air films. In this way we are able to maintain stable air layers which can wrap around the entire drop to form repeatable antibubbles, i.e. spherical air layers bounded by inner and outer liquid masses. Furthermore, for the most viscous drops they enter the pool trailing a viscous thread reaching all the way to the pinch-off nozzle. The air sheet can also wrap around this thread and remain stable over an extended period of time to form a cylindrical air sheet. We study the parameter regime where these structures appear and their subsequent breakup. The stability of these thin cylindrical air sheets is inconsistent with inviscid stability theory, suggesting stabilization by lubrication forces within the submicron air layer. We use interferometry to measure the air-layer thickness versus depth along the cylindrical air sheet and around the drop. The air film is thickest above the equator of the drop, but thinner below the drop and up along the air cylinder. Based on microbubble volumes, the thickness of the cylindrical air layer becomes less than 100 nm before it ruptures
The K\"ahler-Ricci flow on surfaces of positive Kodaira dimension
The existence of K\"ahler-Einstein metrics on a compact K\"ahler manifold has
been the subject of intensive study over the last few decades, following Yau's
solution to Calabi's conjecture. The Ricci flow, introduced by Richard Hamilton
has become one of the most powerful tools in geometric analysis.
We study the K\"ahler-Ricci flow on minimal surfaces of Kodaira dimension one
and show that the flow collapses and converges to a unique canonical metric on
its canonical model. Such a canonical is a generalized K\"ahler-Einstein
metric. Combining the results of Cao, Tsuji, Tian and Zhang, we give a metric
classification for K\"aher surfaces with a numerical effective canonical line
bundle by the K\"ahler-Ricci flow. In general, we propose a program of finding
canonical metrics on canonical models of projective varieties of positive
Kodaira dimension
Numerical determination of concrete crack width for corrosion-affected concrete structures
Corrosion-induced deterioration of reinforced concrete (RC) structures results in premature failure of the RC structures. In practice concrete crack width is one of the most important criteria for the assessment of the serviceability of RC structures. It is therefore desirable to predict the growth of the crack width over time so that better informed decisions can be made concerning the repairs due to concrete cracking. Literature review shows that little research has been undertaken on numerical prediction of concrete crack width. The intention of this study was to develop a numerical method to predict concrete crack width for corrosion-affected concrete structures. A cohesive crack model for concrete is implemented in the numerical formulation to simulate crack initiation and propagation in concrete. Choices for evaluating the parameters of cohesive elements are extensively discussed which is a key for developing a plausible model employing cohesive elements. The surface crack width is obtained as a function of service time. Accurate prediction of crack width can allow timely maintenance which prolongs the service life of the reinforced concrete structures
Continuum-particle hybrid coupling for mass, momentum and energy transfers in unsteady fluid flow
The aim of hybrid methods in simulations is to communicate regions with
disparate time and length scales. Here, a fluid described at the atomistic
level within an inner region P is coupled to an outer region C described by
continuum fluid dynamics. The matching of both descriptions of matter is made
across an overlapping region and, in general, consists of a two-way coupling
scheme (C->P and P->C) which conveys mass, momentum and energy fluxes. The
contribution of the hybrid scheme hereby presented is two-fold: first it treats
unsteady flows and, more importantly, it handles energy exchange between both C
and P regions. The implementation of the C->P coupling is tested here using
steady and unsteady flows with different rates of mass, momentum and energy
exchange. In particular, relaxing flows described by linear hydrodynamics
(transversal and longitudinal waves) are most enlightening as they comprise the
whole set of hydrodynamic modes. Applying the hybrid coupling scheme after the
onset of an initial perturbation, the cell-averaged Fourier components of the
flow variables in the P region (velocity, density, internal energy, temperature
and pressure) evolve in excellent agreement with the hydrodynamic trends. It is
also shown that the scheme preserves the correct rate of entropy production. We
discuss some general requirements on the coarse-grained length and time scales
arising from both the characteristic microscopic and hydrodynamic scales.Comment: LaTex, 12 pages, 9 figure
Pulse Shape Discrimination Techniques in Scintillating CsI(Tl) Crystals
There are recent interests with CsI(Tl) scintillating crystals for Dark
Matter experiments. The key merit is the capability to differentiate nuclear
recoil (nr) signatures from the background -events due to
ambient radioactivity on the basis of their different pulse shapes. One of the
major experimental challenges is to perform such pulse shape analysis in the
statistics-limited domain where the light output is close to the detection
threshold. Using data derived from measurements with low energy 's and
nuclear recoils due to neutron elastic scatterings, it was verified that the
pulse shapes between -events are different. Several methods of
pulse shape discrimination are studied, and their relative merits are compared.
Full digitization of the pulse shapes is crucial to achieve good
discrimination. Advanced software techniques with mean time, neural network and
likelihood ratios give rise to satisfactory performance, and are superior to
the conventional Double Charge method commonly applied at higher energies.
Pulse shape discrimination becomes effective starting at a light yield of about
20 photo-electrons. This corresponds to a detection threshold of about 5 keV
electron-equivalence energy, or 4050 keV recoil kinetic energy, in realistic
experiments.Comment: 20 pages, 7 figure
Simulation of damage on laminates
An experimental study on controlled faulty perturbed flexible structures is developed using an active mass damper actuator, where the flexible structure is subject to external perturbation and sensor faults. To attenuate the disturbance effects on the flexible structure, we present three robust controllers: one is based on dynamics LMI control technique design, other is an improvement of the first one but adding a chattering term, and the last one is the second one but with the chattering gain adjusted dynamically. According to experiments, where a flexible two level building with active mass damper (by Quanser), external perturbation, and sensor faults, evidence that the proposed LMI controller with chattering term where its gain is dynamically adjusted presents the best closed-loop system behavior.Postprint (published version
Quasi-Periodic Releases of Streamer Blobs and Velocity Variability of the Slow Solar Wind near the Sun
We search for persistent and quasi-periodic release events of streamer blobs
during 2007 with the Large Angle Spectrometric Coronagraph on the \textit{Solar
and Heliospheric Observatory} and assess the velocity of the slow solar wind
along the plasma sheet above the corresponding streamer by measuring the
dynamic parameters of blobs. We find 10 quasi-periodic release events of
streamer blobs lasting for three to four days. In each day of these events, we
observe three-five blobs. The results are in line with previous studies using
data observed near the last solar minimum. Using the measured blob velocity as
a proxy for that of the mean flow, we suggest that the velocity of the
background slow solar wind near the Sun can vary significantly within a few
hours. This provides an observational manifestation of the large velocity
variability of the slow solar wind near the Sun.Comment: 14 pages, 5 figures, accepted by Soalr Physic
- âŠ